Ariens 927 User Manual

0 (0)

c^rtens ®

Series

Riding Mower

Parts

Manuai

PRINTED IN USA	PART NO. 027551C
	8-95

A Message to Ariens Parts Manual User

Your Ariens Dealer will be happy to supply any service or advice which may be required to keep your Ariens equipment operating at peak efficiency. He stocks genuine Ariens parts and lubricants, manufactured with the same precision and skill as the original equipment. His factory trained staff is kept well informed on the best methods of servicing Ariens equipment and is ready and able to serve you. If

engine repairs or service are required, they can be obtained from an Ariens Dealer or from an authorized engine manufacturer’s service center. If service is required, be prepared to supply the service person with the Model Number and Serial Number of the equipment and engine, as well as a full description of the problem encountered.

Introduction

The Information contained herein is intended for use by Ariens Dealer’s trained servicemen and serves as a supplement to and reminder of training sessions conducted by Ariens Company. Before you attempt any repair, adjustment or maintenance project, be certain that you have read and fully understand the instructions in your Owner’s and Repair Manuals. Understand and follow each Danger, Warning, Caution and all instructions exactly as given. Also be sure that you have all tools, replacement parts and other materials required to complete the project.

A network of Ariens Dealers and Distributors is maintained in order to assure you of an adequate supply of replacement parts and technical assistance. Your local Ariens Dealer is required to order parts through his distributor. When replacement parts are required, use only genuine Ariens parts. Failure to do so may result in product malfunction and possible injury to operator and/or bystander.

NOTE: All references to “Left”, “Right”, “Front” and “Rear^’ are given from operator’s position.

NOTE: The descriptions and specifications contained in this manual were in effect at the time the manual was approved for printing. Ariens Company reserves the right to discontinue models without notice and without incurrying obligation. The equipment described within this manual may not be identified as either standard or optional and the various illustrations may not all be applicable to your particular unit. If you have questions, always check with your Ariens Dealer.

NOTE TO ARIENS DEALERS: Refer to your current Parts Price List for suggested parts stocking. Service training for dealers is available at the Ariens Service School. See your Ariens Distributor for the latest school.

How to Order Replacement Parts

This Parts Manual is arranged for easy identification of genuine Ariens Service parts that are illustrated showing their relationship to one another. Item numbers In the illustrations correspond to item numbers in the first column of the parts list and are followed by the Ariens Part Number, Description and Quantity with variations between models and/or serial numbers designated in the part description. S/N 000000> means this serial number and up with S/N <000000 meaning up to this serial number.

Order parts from your nearest authorized Ariens Dealer. For prompt service when ordering parts, provide the following information.

1.MODEL AND SERIAL NUMBERS OF EQUIPMENT

2.PART NUMBER (not Item Number).

3.DESCRIPTION

4.QUANTITY REQUIRED.

Contents
Decals.......................................................................	2
Electrical ...................................................................	4
Frame and Seat........................................................	6
Steering.....................................................................	8
Speed Selector .......................................................	10
Brake and Clutch....................................................	12
Engine and Belts.....................................................	14
Rear Axle................................................................	16
Gear Case...............................................................	18
Mower Height Linkage............................................	20
Mower Engagement Linkage..................................	22
Mower Pan .............................................................	24
Mower Spindle........................................................	26

This manual covers the models listed. Specific Model and Serial Numbers of your unit and attachment are on a label on the unit. Record these numbers in the space provided and use them whenever parts or service are required.

MODEL NUMBER

SERIAL NUMBER!

ENGINE NUMBER

SERIAL NUMBER

Models

Model 927037 (RM830e) - 8.5 HP

Briggs & Stratton w/30” Pan Serial No. 006339 and up

Model 927043 (RM1230e) -12.5 HP

Briggs & Stratton w/30” Pan Serial No. 001400 and up

Model 927045 (RM828e) - 8.0 HP

Briggs & Stratton w/28" Pan Serial No. 000600 and up

Model 927047 (RM1132e) -11.5 HP

Briggs & Stratton w/32” Pan Serial No. 000101 and up

Model 927048 (RM9028e) - 9.0 HP

Briggs & Stratton w/28” Mower Serial No. 000101 and up

Model 927049 (RM9030e) - 9.0 HP

Briggs & Stratton w/30” Mower Serial No. 000101 and up

Model 927050 (RM1232e) -12.0 HP

Briggs & Stratton w/32" Mower Serial No. 000101 and up

Model 927301 (RM8028e) - 8.0 HP

Briggs & Stratton w/28” Mower Serial No. 000101 and up

Model 927302 (RM1228e) -12.0 HP

Briggs & Stratton w/28” Mower Serial No. 000101 and up

Model 927303 (RM1232e) -12.0 HP

Briggs & Stratton w/32” Mower Serial No. 000101 and up

Decals

|| lens

05216800 (050,303)

CAUTION

I Before sinning ongine hesure machine js in iicutrnl and mower clutch is

« disengaged

V"' few

Etigine

High Ignition

M ovjei' Mower

Clutch Height

02743000 Dash with Silkscreen

[\/lower Clutch

07855500

07855200
07855200			Mower
			Height
	ROTATING
	BLADE
	>Keep hands	07855400
	& feet away.
	>Stop engine &
	remove ignition
	key before
	clearing.

07798700 - (Not 927301,302,303)

07712100 - (927301,302,303)

A CAUTION

Before starting engine be sure machine is in neutral and mower clutch is disengaged.

07855800

Cast Iron Bore

07797600 (Not 045,048,301)

f AWARNINGÌ

TO AVOID SERIOUS INJURY

OR DEATH

• RLiad opE?rator's manual.	al	"!
• Undersiand localion and	al	i
funclion of all control^«.	I \|la\|\|^
• Look down and tiehind
and while backing,	tiKoyifn
■ Romoyc ohjccls fiatcou	tiKoyifn
"by "the blade..............................................

•Avoid sttddon toms,

•Chock interlock system ix3i manual before uso.

•Keep all sheilds in place.

•Nevor carry chi Idem.

► Keep |5eople and pets away v;lien o|>= rating

machine.

»Go up and down tslopes, not across,

•ft machine stops going uphill, shut off PTO and back down slowly.

•Release parking brake

•Depress clutch pedal

•Shill to 1st or 2nd speed

•Slowly lelcase clutch

» Shift to desired Sfjeed

STOP

» Depress clutch pedal * DOiJress Brake ixidal

* Befoie leaving operator's

position:

Shift to neutral Engage parking brake

Oi sen gage mower dutch

Stop Engjine Remove ignition key

SERVICING

► Wait for all movement to slop * Disconnect spark plug wire

•Before dpping unit, drain gas larik arid remove battery' i1 electric

07859800 - (Not 301,302,303)

07712000 - (927301,302,303)

Decals

07778600 - (927045,301)

07784700 - (927037)

07779400 - (927043)

07785100- (927050,303)

07710700- (927302)

07785000 - (927047)

07711700- (927048)

07711800- (927049)

07701700 (Not 037,043,049)

Electrical

Models 927037,043,045,047,048,049,050,301,302,303

ITEM	PART	DESCRIPTION	QTY.	ITEM	PART	DESCRIPTION QTY.
NO.	NO.			NO.	NO.

1	01238500	Regulator	1	9	02707800	Switch Interlock
2	02727900	Starter Cable 16”	1			(037,043,045,047)	2
3	02749400	Battery	1		02754100	Switch-Snap Mounting N.O.
4	02518900	Ground Cable	1			(048,049,050,301,302,
5	02727200	Starter Cable 13”	2			303)	2
6	03057700	Solenoid	1	10	02724000	Module	1
7	02753600	Wire Harness RM		11	02739700	Adapter - Seat Switch	1
	52707300	B & S Engines	1	12	03171600	Switch Seat	1
8	52707300	Switch Assembly	1

Notes

Frame and Seat

Models 927037,043,045,047,048,049,050,301,302,303

Frame and Seat

Models 927037,043,045,047,048,049,050,301,302,303

ITEM	PART	DESCRIPTION QTY.	ITEM	PART	DESCRIPTION QTY.
NO.	NO.		NO.	NO.

1	02726400	Engine Cover (047,050,303) 1	32	06202600	Bolt-Round Head Square
2	03584600	Seat-V450			Neck .312-18 x.62	1
		(043,047,050,302,303) 1	33	02700400	Brace	1
	03504100	Seat V-350	34	06504000	Nut-Locking-Center .250-20	2
		(037,045,048,049,301) 1	35	06101700	Screw-Machine 10-24x .62	2
3	02743500	Seat Bracket 1	36	05903900	Bolt-Hex .31-18 X.50	4
4	02735100	Baffle 1	37	07405200	Screw-Tapping .25-20 x .50	4
5	06505100	Nut-Keps 10-24 2	38	02538700	Strap (047)	1
6	06101400	Screw-Machine 10-24 x .38 2	39	06907500	Clip (047)	1
7	06702000	Pin-Hair Internal .08 x .18	40	01035800	Spacer Bushing	2
		X1.18 2	41	52700200	Frame with Decals	1
8	02744900	Seat Hold Down 1	42	02460900	Key Set	1
9	06504200	Nut-Locking .312-18 16	43	07517700	Cap-Ignition Switch	1
10	06301800	Washer-Lock Internal .313	44	06517300	Nut-Panel .625-32	1
		X .030 2	45	06301900	Washer-Lock Internal .625
11	02739100	Seat Leg Assembly 1			X.045	2
12	06400200	Washer-Flat-Steel .38 x .875	46	02736400	Seat Pivot Bracket	1
		X .083 4	47	07501900	Knob	1
13	06300300	Washer-Lock .312 x .097 4	48	07406400	Screw-Tapping 10-12 x .50	6
14	05913500	Bolt-Hex .31-18 X.75 4	49	07402600	Screw-Tapping 10-24 x .375	2
15	05902200	Bolt-Hex .31-18 X.75 6	50	07507600	Plastic Grommet	6
16	06407900	Washer-Flat-Steel .344 x	51	06912700	Throttle Control	1
		1.125X.063 2	52	02743000	Dash Panel - RM	1
17	02729700	Exhaust Pipe Assembly (047) 1	53	02530700	Rubber Pad	1
18	07403400	Screw-Tapping 8-32 x .38 4	54	02742300	Battery Tray	1
19	02755500	Muffler Guard (302) 1	55	02515200	Hook	2
20	02755600	Screw (302) 3	56	02708000	Cowl	1
21	07507500	Battery Strap 1	57	02739500	Grille Insert & Shell Assembly	1
22	02701200	StandupTube (043,045,048,	58	02718600	Left Hand Fender Brace	1
		049,301,302) 1	59	06405700	Washer-Flat-Steel .323 x	4
	02726700	StandupTube (047,050,303) 1			.625 x .062	4
23	05904500	Bolt-Hex .31-18x1.50 (043,	60	06509000	Nut-Locking-Twin .312-18	2
		045,048,049,301,302) 4	61	06201100	Bolt-Round Head Square	2
	05913000	Bolt-Hex .31-18x2.75			Neck .31-18X.75	2
		(047,050,303) 4	62	02718700	Right Hand Fender Brace	1
24	02722700	Service Bar Brace 2	63	02705200	Frame Brace	1
25	01316600	Spacer (047,050,303) 4	64	06507800	Nut-Flange .312-18	4
26	02743900	Plate-Backing (047,050,303) 2	65	06203300	Bolt-Round Head Square
27	07401400	Screw-Tapping .312-18 x .50 2			Neck .31-18X.62	4
28	02701100	Back Cover 1	66	07402900	Screw-Tapping .312-18 x
29	05902800	Bolt-Hex .25-20 x .50 5			1.50	1
30	02726800	Clip (047,050,303) 2	67	02717700	Frame Brace	1
31	07404500	Screw-Tapping 12-24 x .50	68	05900200	Bolt-Hex .31-18X.63	3
		(047,050,303) 2

+ 21 hidden pages

Ariens 927 User Manual

A Message to Ariens Parts Manual User

Introduction

How to Order Replacement Parts

1.MODEL AND SERIAL NUMBERS OF EQUIPMENT

2.PART NUMBER (not Item Number).

3.DESCRIPTION

4.QUANTITY REQUIRED.

Contents

Models

Model 927037 (RM830e) - 8.5 HP

Model 927043 (RM1230e) -12.5 HP

Model 927045 (RM828e) - 8.0 HP

Model 927047 (RM1132e) -11.5 HP

Model 927048 (RM9028e) - 9.0 HP

Model 927049 (RM9030e) - 9.0 HP

Model 927050 (RM1232e) -12.0 HP

Model 927301 (RM8028e) - 8.0 HP

Model 927302 (RM1228e) -12.0 HP

Model 927303 (RM1232e) -12.0 HP

Decals

Frame and Seat