Apple WaveBurner 1.5 User Manual

0 (0)
WaveBurner
User Manual
Apple Inc.
© 2007 Apple Inc. All rights reserved.
Under the copyright laws, this manual may not be
of Apple. Your rights to the software are governed by
the accompanying software licence agreement.
The Apple logo is a trademark of Apple Inc., registered
in the U.S. and other countries. Use of the “keyboard”
Apple logo (Option-Shift-K) for commercial purposes
without the prior written consent of Apple may
constitute trademark infringement and unfair
competition in violation of federal and state laws.
Every effort has been made to ensure that the
information in this manual is accurate. Apple Inc. is not
responsible for printing or clerical errors.
Note:
Because Apple frequently releases new versions
and updates to its system software, applications, and
Internet sites, images shown in this book may be slightly
different from what you see on your screen.
Apple Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
www.apple.com
Apple, Logic, Mac, Macintosh, and Mac OS are
trademarks of Apple Inc., registered in the U.S. and other
countries.
Finder and SuperDrive are trademarks of Apple Inc.
Other company and product names mentioned herein
are trademarks of their respective companies. Mention
of third-party products is for informational purposes
only and constitutes neither an endorsement nor a
recommendation. Apple assumes no responsibility with
regard to the performance or use of these products.
3
1

Contents

Preface 7 An Introduction to WaveBurner
8
Creating a CD With WaveBurner
9
Quick Start
Chapter 1 11 The WaveBurner Interface
12
The Toolbar
13
Overview
13
Wave View Area
15
Region List
16
Track List
17
Plug-in Windows
18
Region Info Window
21
Track Info Window
22
Index Point Info Window
23
Level Meter
23
Customizing the Toolbar
Chapter 2 25 Getting Started With WaveBurner
25
Elements of a Project
26
Creating, Opening, and Saving Projects
26
Adding Audio Files to a Project
27
Name Handling in WaveBurner
27
Auditioning Projects and Controlling Playback
29
Navigating in the Wave View Area
Chapter 3 31 Working With Regions
31
Selecting Regions
32
Copying Regions
32
Reordering Regions
32
Moving Regions
33
Trimming Regions
33
Splicing Regions
34
Adjusting Levels
34
Checking a Region for Clipping
4
Contents
35
Normalizing Regions
36
Adding and Adjusting Fades
38
Bouncing Regions
38
Renaming Regions
38
Deleting Regions
Chapter 4 39 Working With Tracks
39
The Track List
40
The CD Track Info Window
42
Bouncing Tracks
Chapter 5 43 Working With Markers
43
Types of Markers
44
Inserting and Deleting Markers
46
Moving Markers
Chapter 6 49 Working With Effects
49
Effects Plug-ins Included With WaveBurner
50
Using Audio Units Effects Plug-ins
51
Adding and Deleting Plug-ins
52
Bypassing Plug-ins
52
Adjusting Plug-in Parameters
53
Changing the Plug-in Order
53
Using the Level Meter
Chapter 7 55 Burning a Project to a CD
55
Getting Ready to Burn a CD
55
Supported CD Burners
55
Setting Disc Options
57
Previewing Transitions
57
Burning the CD
Chapter 8 59 Setting WaveBurner Preferences
59
General Preferences
60
Audio Driver Preferences
60
Preview Preferences
61
Burn Preferences
61
Bounce Preferences
62
SDII Preferences
62
Info Preferences
Contents
5
Appendix 63 WaveBurner Keyboard Shortcuts
63
File Commands
63
Editing Commands
63
Disc Operations
64
Region Commands
64
View Commands
64
Transport Operations
65
Wave View Area Commands
65
Window Commands
65
Help Commands
7
Preface

An Introduction to WaveBurner

WaveBurner is an application that lets you assemble, master,
and burn audio CDs using a SuperDrive or CD burner
supported by Mac OS X.
Audio CDs created with WaveBurner can be played back on any audio CD player, and
can be used as pre-masters—for mass production.
WaveBurner supports all Red Book options for CD audio data storage. You can add up
to the maximum 99 tracks and 99 subindexes per track allowable by the Red Book
standard, include ISRC codes for each track, set copy prevention and pre-emphasis flags
for each track, and add UPC/EAN codes for the CD. WaveBurner also supports the CD
TEXT standard, allowing you to add text information that can be read by any CD TEXT-
compatible player.
You create a CD by adding audio files to a WaveBurner project. The audio files appear
as regions in the project window, where you can edit and arrange them graphically or
numerically. You can add effects to both individual regions and the overall project—
using the included effects, or Audio Unit plug-ins installed on your computer. You can
edit pauses between tracks and add fade-ins, fade-outs, and crossfades. When your
project is complete, you can burn the project to a CD.
8 Preface
An Introduction to WaveBurner

Creating a CD With WaveBurner

WaveBurner makes it easy to create professional-quality audio CDs, in a straightforward,
no-fuss way. The following outlines the workflow of a typical WaveBurner project.
Step 1: Add audio files
You start by creating a new project and adding audio files. When you add an audio file,
it is imported as a region, which you can arrange and edit in the Wave View area and
the
Region list.
A track is created for each new region. You can edit the track in the
Wave View area and the
Track list.
Step 2: Edit regions and tracks
You can edit regions and tracks in a variety of ways—either graphically in the Wave
View area, or numerically in the Region and Track lists. You can copy, reorder, trim, split,
adjust gain, and normalize regions. It’s also possible to combine several regions into
one track, or create several tracks with one region. As you work, you can play all, or any
part, of the project to hear the results of your edits immediately.
Step 3: Adjust crossfades
When you add a region, WaveBurner creates a track and adds track markers—to define
the pause between tracks. You can create crossfades between overlapping regions, and
adjust the crossfades in the Wave View area. You can also insert index markers to create
index points within a track.
Step 4: Add effects
You can add effects to individual regions and to the overall project mix, to enhance and
shape the sound. A set of professional-quality mastering effects is bundled with
WaveBurner, including equalization (EQ), compression, limiting, and noise reduction, as
well as analysis tools that will help you to optimize the overall mix. You can adjust
effect parameters and save and recall settings, including chains of effects and their
settings. You can also use Audio Unit effect plug-ins from Apple or third-party
manufacturers.
Step 5: Burn the project to a CD
You burn your project with supported CD burning hardware that is connected to (or
installed in) your Macintosh. Prior to burning the project to a CD, you can make use of
the Burn Test mode to determine the maximum speed that your system can reliably
write data to a blank CD-R.
Preface
An Introduction to WaveBurner
9

Quick Start

You can quickly burn a CD, using existing audio files and default settings for pauses
and crossfades.
To quickly burn a CD:
1
Open WaveBurner.
2
Choose File > New to create a new project.
3
Drag the desired audio files into the Region list or Wave View area—in the order that
you want them to appear on the CD.
4
Click the Burn button.
The Burn dialog appears at the top of the window. The name of the CD burner is
shown in the Burn dialog. If there is no blank disc in the CD burner tray, the Burn dialog
prompts you to insert one.
5
Insert a blank CD-R disc, if you have not already done so.
6
Click the Burn button in the Burn dialog.
WaveBurner will immediately begin burning (writing) your project to the blank CD. The
Burn dialog shows the progress of the burn process. When the write is complete, the
CD is ejected from the CD burner and is ready to play.
1
11
1

The WaveBurner Interface

You create your projects in the main WaveBurner window.
You can add and organize the regions in your project, graphically edit regions, pauses,
and crossfades, play the project to preview your changes, and add effects plug-ins in
the WaveBurner window.
The WaveBurner interface features the following main areas:
Â
Customizable Toolbar with Counter (if visible):
You can customize the Toolbar by
adding a Counter and buttons for the commands you use most often. See
Customizing the Toolbar on page 23 for further information.
Â
Overview:
Displays a timeline of the entire project, including all regions.
Â
Wave View area:
Displays the regions in time order. You can graphically edit regions,
track markers, pauses, and crossfades in the Wave View area.
Â
Time, Track, and Index field:
Displays the current track number, index number and the
position of the position line.
Customizable Toolbar
Overview
Wave View area
Region list
Track list Region and Mix Plug-In lists
Time, Track, and
Index field
12 Chapter 1
The WaveBurner Interface
Â
Region list:
Lists the regions in chronological order. You add and organize regions in
the Region list.
 Track list: Lists tracks in the order that they will appear on the CD, and displays
information for each track.
 Region and Mix Plug-In lists: You add effects plug-ins and adjust plug-in parameters in
the Region and Mix Plug-In lists.
Note: You can freely adjust the relative sizes of each section of the WaveBurner
interface by click-dragging on the parallel lines found on the borders of the various
panels. Vertical borders may be dragged horizontally, and horizontal borders may be
dragged vertically.

The Toolbar

WaveBurner’s Toolbar is customizable (see “Customizing the Toolbar on page 23). It
contains a number of default tools that may include; the Import, Check Disc for
Clipping, Normalize Region, Burn, Bounce Project, Mastering Notes, CD Text, and
Region Info buttons, amongst others. It may also contain the Counter.
Counter
The Track field of the Counter displays the number of the track, with the smaller index
marker shown to the right. The current location of the position line is shown in minutes
and seconds in the Time field. The counter updates in real time as you play the project.
The Counter is designed to emulate the display of a CD player. A more accurate display
is available in the time ruler.
Note: The information shown in the Counter is also displayed in the Time, Track, and
Index fields below the Wave View, allowing you to remove the Counter, if desired.
Chapter 1
The WaveBurner Interface
13

Overview

The Overview displays the entire duration of the project. A red rectangle in the
Overview indicates the part of the project currently visible in the Wave View area. You
can navigate to a different part of the project while simultaneously zooming in or out
on the Wave View, by dragging horizontally (move) and vertically (zoom) in the rectangle.

Wave View Area

The Wave View area is the main workspace for your projects. You view and graphically
edit regions and markers in the Wave View area. Regions are arranged, alternately,
between the top and bottom rows in the Wave View area. The two rows are
functionally identical—the reason for two of them is to simplify the editing of
overlapping regions.
Each region is displayed as a green rectangle, containing a waveform. Each region also
features a volume level line, which you can adjust. Track start markers are displayed as
purple flags, index markers as brown flags.
The Wave View area includes the following features:
Â
Marker bars:
You add and arrange markers in the marker bars, located at the top and
bottom of the Wave View area.
Â
Time rulers:
These show time units, enabling you to precisely place regions and
transitions at specific locations. Clicking the arrow button to the right of the Zoom
control opens a menu that allows you to change the ruler time format. You can also
access this menu by Control or right-clicking the time rulers. If you enable the CD
Track Time option in the menu, the time rulers will display the track time (rather than
the disc time).
Vertical Waveform
Zoom control
Marker bar
Time ruler
Transport controlsMarker buttons Time, Track, and Index fieldsEdit mode buttons
Marker bar
Horizontal Zoom control
Time ruler
Position line
14 Chapter 1 The WaveBurner Interface
 Position line: This shows the current point in time (audible if the project is playing), or
the playback start position (if stopped).
 Transport buttons: You control the playback, stop, and forward/rewind functions, and
the location of the position line with the transport buttons.
 Edit mode buttons: Click one of the buttons to choose either of the edit pointer
modes, to perform different region editing tasks in the Wave View area. Press
Command to change between the two edit pointer modes.
 Marker buttons: Click one of the buttons to select either marker type, before adding
them to the marker bar. Press Command to alternate between the two edit pointer
modes.
 Time, Track, and Index fields: These fields show the current location of the position
line, the current track, and the current index point (if the project contains index
markers). This information is identical to that shown in the Counter, allowing you to
remove the Counter, if desired. Clicking the clock icon (beside the time field) opens a
menu that allows you to switch the time display between the following formats:
Track Time Elapsed, Track Time Remaining, Disc Time Elapsed, Disc Time Remaining.
 Vertical Waveform Zoom control: Click to set the zoom level of the vertical waveform
display.
 Horizontal Zoom control: Click the control or drag the slider to zoom in or out.
 Scroll bar: Drag to change the visible area of the project. Click-dragging the Zoom
Scroll buttons at either end of the scroll bar zooms the display in or out to fit the
window.
Chapter 1 The WaveBurner Interface 15

Region List

You add and organize your project’s regions in the Region list. Regions are listed
chronologically (in time order) from top to bottom. When you select a region in the
Region list, the region is also selected in the Wave View area. Click-holding the audio
file icon in the first column allows you to reorder regions by dragging them up or
down. Option-dragging region names copies them.
The Region list displays the following information about each region and its marker
points:
 Number
 Start time
 Title
 Length
 Comment
The arrow menu in the upper right corner of the Region list allows you to change the
time format. You can also determine if the time display of markers will be shown in
absolute (elapsed time since CD start), or relative values (elapsed time since track start).
You may freely swap column positions by click-dragging on the column name field,
and moving it left or right. Column widths may be resized by click-dragging on the
vertical lines that separate the column name fields. Click-dragging on the vertical line
between the Region and Track list enables you to set the width of the Region list,
thereby hiding or showing columns.
16 Chapter 1 The WaveBurner Interface

Track List

The Track list displays the track order as it will appear on the CD, and shows
information about each track.
The Track list includes the following information for each track and its marker points:
 Number
 Start time
 Title
 Length
 Copy Protection state (SCMS)
 Pre-emphasis state (PE)
 ISRC code
 Pause start time
 Comments
The arrow menu in the upper right corner of the Track list allows you to change the
time format. You can also determine if the time display of markers will be shown in
absolute (elapsed time since CD start), or relative values (elapsed time since track start).
You may freely swap column positions by click-dragging on the column name field,
and moving it left or right. Column widths may be resized by click-dragging on the
vertical lines that separate the column name fields. Click-dragging on the vertical line
between the Region and Track list enables you to set the width of the Track list, thereby
hiding or showing columns.
Chapter 1 The WaveBurner Interface 17

Region and Mix Plug-In Lists

You add and organize plug-ins in the two Plug-In lists. The Region Plug-In list shows
the plug-ins for the currently selected region.
Note: If none, or more than one, region is selected, the Region Plug-In list does not
display any plug-ins.
The Mix Plug-In list shows plug-ins used on the overall project. Click on the
corresponding tab to select either list.
The Add Plug-In menu enables you to load a plug-in. Click on the menu, and browse to
the desired plug-in name. Click the name, and the plug-in will be added to the list,
below any existing plug-ins, if applicable. The Plug-In Chain menu allows you to load
and set up plug-in chains.

Plug-in Windows

Each effect plug-in has its own window, offering controls that enable you to adjust
plug-in parameters. The controls can include sliders, buttons, and value fields, each
labeled to indicate the parameter being controlled. For details on the effect plug-ins
included with WaveBurner, please refer to the Logic Studio Instruments and Effects
manual.
To open a plug-in’s window:
m Double-click on the plug-in name in the Region or Mix Plug-In list.
18 Chapter 1 The WaveBurner Interface

Region Info Window

The Region Info window allows you to view and edit information about the currently
selected region and its source audio file.
To show the Region Info window, do one of the following:
 Select a region, then choose Region > Region Info (or press Command-R).
 Double-click on the desired region.
The Previous and Next buttons allow you to step between the preceding and ensuing
regions in the Region list. This can accelerate the editing of a particular parameter in
several regions.
The Cancel and OK buttons cancel or execute any changes made in the Region Info
window.
Note: The Cancel button only works for the currently selected region: If you edited a
Region, then used the Next or Previous button to step to another region, followed by a
click on Cancel, only the changes made to the currently displayed region are canceled.
General Tab
The General tab of the Region Info window displays the following information:
 Region name: Double-click, and type in a new name to edit.
 Length
 Gap To Previous Region: The length of the gap between the start of the selected
region and the end of the previous region. Negative values refer to overlapping
regions—in other words, a given region starts before the previous region has ended.
 Trim Start and Trim End: These two values show the points at which the region
begins (after the start of the audio file) and ends (before the end of the audio file). As
long as the region spans the complete audio file, Trim Start and Trim End will have
values of 0.
Chapter 1 The WaveBurner Interface 19
 Gain Left and Gain Right: These fields show the gain settings for the left and right
audio channels. Adjust by click-holding on the arrows on either side of the numerical
value, or double-click directly on the value and type in a new one.
 Region Peak Position and Level: Indicate the position (relative to the start of the
region, not the audio file) and level of the highest audio peak in the region. Any
volume changes made in WaveBurner (using the region’s volume envelope, for
example) are not taken into account.
Audio File Tab
The Audio File tab of the Region Info window displays the following information about
the region’s source audio file.
 Audio file format, including bit depth and ordering, sample rate, and file type
 File length and size
 Creation and modification dates
 Peak position and level
 Location of the audio file on disk. Use the Show in Finder button to display the file in
the Finder.
20 Chapter 1 The WaveBurner Interface
Fades Tab
The Fades tab of the Region Info window allows you to view and edit the following
information about the fades for the Fade In (top) and Fade Out (bottom) of your region.
 Fade-In and Fade Out menu: Click to choose a fade type. Choices include No Fade,
Free, S-Curve, and Concave/Convex fade curves. Click the Set Linear button to reset
the fade curves to linear (straight line).
 Fade Length: Click to input the desired fade length.
 Shape: If a fade curve type other than Free is selected, the Shape parameter allows
you to edit the points of the fade curve. Small shape values result in a shallower
curve—a value of zero equals a straight line.
 Curve points x/y coordinates: Indicate the positions of the fade curve envelope
points—as seen in the Wave View area. If the curve type is set to Free, you can edit
the curve point coordinates manually in the value fields.
Comments Tab
The Comments tab of the Region Info window enables you to add notes and
information about a region.
Loading...
+ 45 hidden pages