APC AP9470, AP9475, AP9465 User Manual

0 (0)
APC AP9470, AP9475, AP9465 User Manual

Installation Manual

InfraStruXure® Central

AP9465

AP9470

AP9475

This manual is available in English on the enclosed CD.

Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar. Este manual está disponible en español en el CD-ROM adjunto.

Ce manuel est disponible en français sur le CD-ROM ci-inclus.

Questo manuale è disponibile in italiano nel CD-ROM allegato.

CD-ROM

O manual em Português está disponível no CD-ROM em anexo.

Данное руководство на русском языке имеется на прилагаемом компакт-диске.

CD

CD .

Contents

Product Description........................................................

1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Receiving inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Please recycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Rack-mounting safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Equipment containing a battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation .......................................................................

3

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

RapidRails Rack Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Remove the rack doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Select a location within the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Install the RapidRails™ slide assemblies . . . . . . . . . . . . . . . . . . . .

5

Install the system in the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Replace the rack doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Communication Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Network overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Set up the Private LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Route network cables to the InfraStruXure Central server

and switch (or hub) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connect the InfraStruXure Central server to your Public LAN . . . . 8 Connect the InfraStruXure Central server to your Private LAN . . . 9

Apply power to the InfraStruXure Central server

and switch (or hub) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

InfraStruXure Central Installation Manual

i

Initial Configuration.......................................................

10

Configure the InfraStruXure Central Server. . . . . . . . . . . . . . . . . . . 10

System and Web browser prerequisites . . . . . . . . . . . . . . . . . . . . . 10

Configuring the InfraStruXure Central server from a remote computer 10

Enable Remote Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Product Information ......................................................

12

InfraStruXure Central Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Basic model (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Standard model (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Enterprise model (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

InfraStruXure Central rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic model (rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Standard Model (rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Enterprise Model (rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

InfraStruXure Central server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Appendix A: LED Error Codes ....................................

19

Error Code Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Appendix B: Diagnostic Messages..............................

21

Message Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Warranties and Policies................................................

24

Two-Year Factory Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Terms of warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Non-transferable warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Warranty claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Life Support Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

General policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Examples of life-support devices . . . . . . . . . . . . . . . . . . . . . . . . . .

25

ii

InfraStruXure Central Installation Manual

Product Description

Overview

Inventory

APC® InfraStruXureCentral server—A 1U or 2U management device. The InfraStruXure Central server works with your APC devices, NetBotz appliances, and other third-party SNMP devices to provide a comprehensive monitoring solution for your IT environment and equipment.

The InfraStruXure Central appliance is available in Basic, Standard, or Enterprise models.

Rack-mount rails— RapidRails™ used to install the InfraStruXure Central server in a standard, 19-inch (482 mm) enclosure or rack.

Power Cords —NEMA 5-15P to IEC-320-C13 and an IEC-320-C13 to IEC-320-C14 power cord. Use the cord appropriate for your power distribution.

Note: The Enterprise model of the InfraStruXure Central server device comes with two of each cable.

The InfraStruXure Central Installation Manual (this book)

Receiving inspection

Inspect the package and contents for shipping damage, and make sure that all parts were sent. Report any damage immediately to the shipping agent. Report missing contents, damage, or other problems immediately to APC or your APC reseller.

Please recycle

The shipping materials are recyclable. Please save them for later use, or dispose of them appropriately.

Disclaimer

APC is not responsible for damage sustained during reshipment of this product from a reseller.

InfraStruXure Central Installation Manual

1

Safety

Rack-mounting safety

The InfraStruXure Central server is shipped with rack-mounting rails. Install the rails at the appropriate position in your rack, and mount the unit. If the unit is mounted in an enclosure instead of an open rack, the maximum ambient temperature in the enclosure should be no greater than 35°C (95°F).

When you install equipment in the rack, make sure it does not interfere with the air flow required for safe operation for the equipment.

When you mount equipment in the rack, make sure you do not cause a hazardous condition because of an uneven mechanical load.

When you connect equipment to the supply circuit, avoid overloading the circuits, which could jeopardize over-current protection and damage the supply wiring. See ratings on the equipment nameplates for guidance.

Maintain reliable earth grounding of the unit, particularly for supply connections (e.g., when Power Distribution Units (PDUs) that are not directly connected to the branch circuit are used).

Equipment containing a battery

This equipment contains a non-replaceable lithium coin cell battery.

2

InfraStruXure Central Installation Manual

Installation

Installation Instructions

This installation guide provides instructions for trained service technicians installing one or more systems in a rack. The provided RapidRails rack kit can be installed without tools in any enclosure that has square holes. One rack kit is required for each system installed in the rack. VersaRails™ rack kits, which are designed for use with enclosures that have round holes, are available for purchase separately.

Caution: Do not install rack kit components designed for another system. Use only the rack kit for your system. Using the rack kit for another system may result in damage to the system and personal injury to yourself and to others.

Before You Begin

Before you begin installing your system in the rack, read the safety instructions on page 2 and in this section.

Observe the following safety precautions when installing your system in the rack

Caution:

• When installing multiple systems in a rack, complete all of the procedures for the current system before attempting to install the next system.

Follow the procedures in this document to protect yourself as well as other service technicians. Your system is very large and heavy, and proper preparation and planning are important to prevent injury to yourself and to others, especially when systems are installed in the top half of the rack.

Installing systems in a rack without front and side stabilizer feet could cause the rack to tip over, potentially resulting in bodily injury. Always install the stabilizer feet of the rack before installing components. The stabilizer feet help prevent the rack from tipping over when a system or other component is pulled out of the rack with the slide assemblies fully extended. See the documentation provided with the rack cabinet for instructions on installing and anchoring the stabilizer feet.

After installing systems in a rack, never pull more than one system out of the rack on its slide assemblies at one time. The weight of more than one extended system could cause the rack to tip over and cause injury.

InfraStruXure Central Installation Manual

3

RapidRails Rack Kit Contents

The RapidRails rack kit includes the following items:

• One pair of RapidRails slide assemblies

Installation Tasks

To install a rack kit, perform the following tasks in order:

1.Remove the rack doors.

2.Select a location within the rack.

3.Install the RapidRails slide assemblies.

4.Install the system in the rack.

5.Replace the rack doors.

Remove the rack doors

See the procedures for removing doors in the documentation provided with your rack cabinet.

Caution:

• Due to the size and weight of the rack cabinet doors, never attempt to remove them by yourself.

• Store the doors where they will not injure someone if the doors accidently fall over.

Select a location within the rack

Each InfraStruXure Central Standard or Basic Edition system requires 1 U (44 mm [1.75 inches]) of vertical space in the rack. Each InfraStruXure Central Enterprise Edition system requires 2 U (88 mm [3.5 inches]) of vertical space in the rack.

4

InfraStruXure Central Installation Manual

Install the RapidRails slide assemblies

1.At the front of the rack cabinet, position one of the RapidRails slide assemblies so that its mounting-bracket flange fits in one U-space in the rack. The top mounting hook on the slide assembly’s front mounting bracket flange should enter the top hole of the U-space.

2.Push the slide assembly forward until the top mounting hook enters the top square hole of the U- space, and then push down on the mounting-bracket flange until the mounting hooks seat in the square holes and the push button pops out and clicks (see below).

Slide assembly (2)

Mounting bracket flange

Mounting hooks (2)

Push button

3.At the back of the enclosure, pull back on the mounting-bracket flange until the top mounting hook is in the top square hole of the U-space you selected, and then push down on the flange until the mounting hooks seat in the square holes and the push button pops out and clicks.

4.Repeat steps 1 through 3 for the slide assembly on the other side of the rack.

Caution: Ensure that the slide assemblies are mounted at the same position on the vertical rails on each side of the rack.

InfraStruXure Central Installation Manual

5

Install the system in the rack

Caution:

• If you are installing more than one system, install the first system in the lowest available position in the rack.

Never pull more than one component out of the rack at a time.

Because of the size and weight of the system, never attempt to install the system in the slide assemblies by yourself.

1.Pull the two slide assemblies out of the rack until they lock in the fully extended position. Lift the system into position in front of the extended slides (see below).

shoulder screw on system

system locking mechanism

2.Place one hand on the front-bottom of the system and the other hand on the back-bottom of the system.

3.Tilt the back of the system down while aligning the back shoulder screws on the sides of the system with the back slots on the slide assemblies.

4.Engage the back shoulder screws into their slots.

5.Lower the front of the system and engage the front and middle shoulder screws in their slots (the middle slot is just behind the yellow system release latch). When all shoulder screws are properly seated, the system locking mechanism at the front of each slide assembly clicks and locks the system into the slide assembly.

6

InfraStruXure Central Installation Manual

Loading...
+ 22 hidden pages