Residential Gas Water Heaters
ENERGY SAVER MANUFACTURED HOUSING
STANDARD VENT AND DIRECT VENT MODELS
COMPLIES WITH HUD STANDARDS FOR MANUFACTURED
HOUSING INSTALLATION
■Meets the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992.
FLAMMABLE VAPOR IGNITION RESISTANT (FVIR) COMPLIANT
GAS CONTROL CONVERTIBLE FOR NATURAL AND PROPANE GAS
■ For flexibility to meet the varying needs of Manufactured Housing installations.
SIDE-MOUNTED 3/4˝ COLD WATER INLET
■For ease of installation when cold water supply originates below the structure. Top mounted 3/4˝ hot water outlet.
DIRECT VENT MODELS PACKAGED WITH BOTTOM INTAKE AIR VENT
■ To draw all combustion make-up air from outside the structure.
OPTIONAL DUCTED AIR INLET KIT FOR DIRECT VENT MODELS
■For use when water heater is installed over a basement. Provision for horizontal air inlet ducting. See instruction manual for approved venting distance by model.
GREEN CHOICE® ECO-FRIENDLY GAS BURNER
■Patented design reduces NOx emissions by up to 33% and complies with less than 40 ng/j requirements for low NOx emissions.
GLASSLINED TANK
■ For long-lasting protection against corrosion.
ANODE ROD
■ Helps protect against corrosion and maximizes tank life.
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
MAXIMUM HYDROSTATIC WORKING PRESSURE 150 PSI
DESIGN-CERTIFIED BY CSA INTERNATIONAL
FMV Model Shown
6-YEAR LIMITED TANK AND 2-YEAR LIMITED PARTS WARRANTY
■ For complete information, consult written warranty.
|
Page 1 of 2 |
Revised July 2014 |
AOSRG46701 |