American Standard 734906-401, 0555.108, 0555.801, 0555.401, 0555.104 User Manual

0 (0)
American Standard 734906-401, 0555.108, 0555.801, 0555.401, 0555.104 User Manual

TOWNSEND

PEDESTAL SINK

VITREOUS CHINA

TOWNSEND PEDESTAL SINK

Vitreous china

Turn-of-the-century detailing on lavatory and pedestal

Front overflow

Supplied with mounting kit

Faucet ledge with large deck area (faucet not included)

0555.801 Faucet holes on 203mm (8") centers (Illustrated)

0555.401 Faucet holes on 102mm (4") centers

Nominal Dimensions:

619 x 495 x 900mm (24-3/8" x 19-1/2" x 35-7/16")

0555.108 Lavatory slab-203mm (8") centers

0555.104 Lavatory slab-102mm (4") centers

734906-401 Pedestal only

89mm

203mm

FINISHED

(8)

WALL

(3-1/2)

 

 

212mm (8-1/2)

Bowl sizes:

 

489mm (19-1/4") wide,

PEDESTAL ANCHORING

 

289mm (11-3/8") front to back,

SCREW HOLES

8mm (5/16) DIA.

 

146mm (5-3/4") deep

 

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures

203mm

(8)

 

495mm

 

(19-1/2)

619mm

13mm

(24-3/8)

(1/2) DIA.

 

 

HOLES FOR

260mm

ANCHOR BOLTS

 

(10-1/4)

51mm

REF.

(2)

 

 

203mm

SUPPLIES AS

178mm

 

 

(8)

To Be Specified:

 

REQUIRED

(7)

 

 

 

 

 

 

Color: White

*578mm

 

 

 

Faucet Finish:

 

1-1/4 O.D.

 

(22-3/4)

 

WASTE

900mm

Supplies:

 

*521mm

 

 

(35-7/16)

 

 

 

 

1-1/4" Trap:

 

(20-1/2)

1-1/4 O.D.

 

 

 

 

Nipple:

 

 

TAILPIECE

 

 

 

FINISHED

 

 

 

* See faucet section for additional models available

 

 

FLOOR

 

 

 

 

 

 

 

229mm

PEDESTAL

 

 

 

SIDE SECTION

 

 

 

(9)

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS ARE SUGGESTED.

PEDESTAL ANCHORING SCREWS NOT INCLUDED.

SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.

FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

J9

© 2008 AS America Inc.

Revised 2/08

Loading...