American Standard 2664.202, 2664.102 User Manual

0 (0)
American Standard 2664.202, 2664.102 User Manual

SCALA CORNER™ WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

SCALA CORNER WHIRLPOOL & BATHING POOL

2664.118 Whirlpool with right hand drain outlet

2664.218 Whirlpool with left hand drain outlet

Acrylic with fiberglass reinforcement

Factory installed and tested whirlpool

system

1.0 HP single speed self-draining pump/motor with dry run seal

Six multi-directional and individually flow-rate adjustable color-coordinated jets

Two color-coordinated air volume controls

Anti-vortex suction fitting

Deck-mounted color-coordinated air switch On/Off control

U.L.® Listed Hydromassage bathtub

Textured tub bottom pattern

Integral sump support feet

Factory installed power cord with plug

Dual molded-in lumbar support

Molded-in seat

Molded-in water retention flange

2664.102 Bathing Pool only with Right-hand Drain Outlet

2664.202 Bathing Pool only with Left-hand

Drain Outlet

Nominal Dimensions: 1524 x 1524 x 502mm (60” x 60” x 19-3/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

Underwriters Laboratories - Hydromassage Bathtubs UL 1795

ASME A112.19.7M for Whirlpool Appliances

ANSI Z124.1 for Plastic Bathtubs

ASTM E162 for Flammability

NFPA 258 for Smoke Density

To Be Specified - Required:

Bath Filler*

Drain: 1553.270 (specify Chrome , Polished Brass or Satin)

Color:

To Be Specified - Optional:

Metal Air Volume Control Kit: 9850.200-two

per kit (specify Chrome, Polished Brass or Satin)

Metal Jet Trim Ring Kit: 9860.200-two

per kit (specify Chrome or Polished Brass or Satin)

*See faucet section for models available

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

SPS 2664

BV-029

Revised 3/98

© 2002 American Standard Inc.

Loading...
+ 1 hidden pages