American Standard Ravenna Pedestal Sink 0268.800, Ravenna Pedestal Sink 0268.400, Ravenna Pedestal Sink 0268.100 User Manual

115.25 Kb
Loading...

RAVENNA™

PEDESTAL SINK

VITREOUS CHINA

RAVENNA™ PEDESTAL SINK

Contemporary sleek design

Made from vitreous china

Rear overflow

Faucet ledge with generous shelf area

Supplied with mounting kit

Optional integral mounted towel bar (ordered separately, installed by customer)

Shown with 2000.101 Ceramix single lever faucet (not included)

0268.800 Faucet holes on 8" (203mm) centers

0268.400 Faucet holes on 4" (102mm) centers

0268.100 Center faucet hole only

Nominal Dimensions:

 

 

 

 

 

 

24-1/4" x 20" x 34"

 

 

 

 

 

 

(616 x 508 x 864mm)

 

 

 

 

 

 

 

 

20-1/4 (514mm)

 

 

 

 

Separate Components:

3-1/4

4

 

FINISHED WALL

 

(83mm)

(102mm)

 

 

0268.008 Pedestal top-8" (203mm) centers

 

 

 

 

 

 

0268.004 Pedestal top-4" (102mm) centers

PEDESTAL

 

8

 

 

 

TO WALL

(203mm)

 

 

 

0268.001 Pedestal top-Center hole only

5-1/4 (133mm)

 

 

 

 

 

PEDESTAL ANCHORING

 

 

20

 

 

0041.000 Pedestal only

 

 

 

 

SCREW HOLES 5/16 (8mm) DIA.

 

(508mm)

 

 

Bowl sizes:

 

 

 

 

 

 

19-3/8" (492mm) wide

 

 

 

 

 

 

11-7/8 (302mm) front to back

 

24-1/2

 

 

 

 

6" (152mm) deep

 

 

 

 

 

 

9-3/8

 

 

 

 

 

OPTIONAL

(622mm)

 

 

 

 

 

TOWEL BAR

(238mm)

 

 

 

 

 

 

 

 

 

 

 

 

REF.

 

 

 

 

Compliance Certifications -

 

 

 

 

 

DRAIN

Meets or Exceeds the Following Specifications:

8

3/4" (19mm) DIA.

CHASE

 

 

 

 

 

 

• ASME A112.19.2M for Vitreous China Fixtures

(203mm)

HOLES FOR

 

 

 

 

 

 

ANCHOR BOLTS

 

• CAN/CSA B45 Series

 

AS REQ'D

 

 

 

 

8 (203mm)

SUPPLIES

 

 

 

 

7

 

 

 

 

 

 

(178mm)

 

 

 

 

 

 

 

1-1/4 O.D.

 

 

34

OPEN

 

 

WASTE

*23

 

 

 

 

(864mm)

TO

 

*20-1/2

 

 

REF.

FLOOR

 

1-1/4 O.D.

(584 mm)

 

 

Recommended Component:

(521mm)

TAILPIECE

 

 

 

 

 

 

 

 

 

Integral Towel Bar: 3520.000

 

FINISHED

 

 

 

 

(Specify 002 Chrome or 295 Satin Nickel)

 

FLOOR

 

 

 

 

 

 

 

 

 

 

 

 

6-1/2 (165mm)

 

 

 

PEDESTAL

To Be Specified:

 

 

 

 

 

SIDE SECTION

 

 

 

 

 

 

Color: White Bone Linen Black

NOTES:

Faucet*:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE

Faucet Finish:

SUGGESTED.

PEDESTAL ANCHORING SCREWS NOT INCLUDED.

Supplies:

SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST

1-1/4" Trap:

BE TAKEN FROM FIXTURE.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

 

 

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

 

 

INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

* See faucet section for additional models available

IMPORTANT: Dimensions of fixtures are nominal and may vary within the

 

 

 

 

range of tolerances established by ANSI Standard A112.19.2.

 

 

These measurements are subject to change or cancellation. No responsibility

 

 

is assumed for use of superseded or voided pages.

 

 

J13

 

© 2008 AS America Inc.

Revised 2/08