|
|
|
|
|
UPGRADABLE |
|
|
|
|
|
PRESSURE BALANCE BATH/SHOWER FITTING |
|
|
|
|
|
VOLUME AND TEMPERATURE CONTROL VALVE |
|
|
|
|
|
MODEL NUMBER: |
|
|
|
|
|
R120 Pressure Balance Rough Valve Body only |
|
|
|
|
|
Direct sweat inlets/outlets. LESS trim. |
|
|
|
|
|
R120SS Pressure Balance Rough Valve Body only |
Available Trim Kits |
|
|
|
with Screwdriver stops |
|
|
|
|
Direct sweat inlets/outlets. Screwdriver stops. LESS trim. |
||
Colony Soft |
Princeton |
Reliant+ |
Reliant 3 |
Seva |
R125 Pressure Balance Rough Valve Body only |
|
|
|
|
|
|
|
|
|
|
|
Female thread inlets/outlets. LESS trim. |
|
|
|
|
|
R125SS Pressure Balance Rough Valve Body only |
Ceramix |
Standard |
Jasmine |
Tendence |
|
with Screwdriver stops |
|
Female thread inlets/outlets. Screwdriver stops. LESS |
||||
|
|
|
|
|
trim. |
|
|
|
|
|
See reverse for available trim kits. |
R120 Valve Body Shown |
|
|
|
|
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve cartridge with volume and temperature control, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat or threaded). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume.
Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. Two piece design allows valve to be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
|
41mm TO 83mm |
|
FINISHED WALL |
(1-5/8 TO 3-1/4) |
VALVE BODY |
|
1/2" NPT |
OPTIONS |
|
|
|
|
|
INLETS |
|
|
103 mm |
|
SHR. 1/2" NOM. |
(4-1/16") |
|
|
|
|
COPPER SWEAT |
51.5 mm |
|
|
|
|
INLETS 1/2" NOM. |
(2-1/32") |
|
COPPER SWEAT |
|
|
|
103 mm |
|
|
(4-1/16") |
|
TUB 1/2" NOM. |
|
|
COPPER SWEAT |
|
|
|
SWEAT (R120) |
OPTIONAL TO FINISHED |
|
149 mm |
|
(5-7/8") |
|
FLOOR USUALLY |
|
|
BETWEEN 1651mm (65) |
SHR. 1/2" NOM. |
51 mm |
AND 1981mm (78) |
COPPER SWEAT |
(2") |
|
||
|
INLETS |
103 mm |
|
1/2" NPT |
|
|
|
(4-1/16") |
|
TUB 1/2" NOM. |
|
|
COPPER SWEAT |
|
|
SWEAT (STOPS) (R120SS) |
|
|
|
SHR |
|
|
1/2" NPT |
|
INLETS |
|
OPTION 457 mm |
86 mm |
|
(3-3/8") |
||
(18") |
|
|
|
86 mm |
|
|
(3-3/8") |
|
|
|
INLETS |
25mm |
|
1/2" NPT |
|
|
|
(1 MIN.) |
|
TUB PORT |
|
|
1/2" NPT |
|
THREADED (R125) |
|
|
|
149 mm |
|
|
(5-7/8") |
1/2" |
|
|
COPPER |
SHR. |
86 mm |
102 mm |
1/2" NOM. |
(3-3/8") |
COPPER |
|
|
(4") |
SWEAT |
|
TOP OF TUB RIM |
TUB 1/2" NOM. |
|
|
COPPER SWEAT |
|
|
|
INLETS 1/2" NPT |
|
THREADED (STOPS) (R125SS) |
BOTTOM OF TUB
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model # ____.____.
B7
© 2006 American Standard Inc.
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R120 - Direct Sweat Valve Body
T508.502 - Princeton Bath/Shower Trim Kit
VALVES |
R120 |
R120SS |
R125 |
R125SS |
|
||||
|
Direct Sweat |
Direct Sweat |
Female Thread |
Female Thread |
|
Inlets/Outlets |
Inlets/Outlets |
Inlets/Outlets |
Inlets/Outlets |
|
|
w/ Screwdriver |
|
w/ Screwdriver |
|
|
Stops |
|
Stops |
MINUTE |
8 |
|
|
|
|
|
FLOW RATE* |
|
Spout |
|||||||
|
|
|||||||||||||||
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PER |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GALLONS |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 40 60 80 100
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
CODES AND STANDARDS
These products meet or exceed the following codes and standards:
ANSI A 117.1
ASSE 1016 ASME A112.18.1 CSA B 125
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
TRIM KITS
|
Colony |
Reliant+ |
Reliant 3 |
Princeton |
|
Ceramix |
Standard |
Jasmine |
Tendence |
|
"Soft" |
Lever |
Seva |
||||||
B/S |
T675.502 |
T495.502 |
T385.502 |
T508.502 |
T480.502 |
T000.502 |
T6282 |
T808.502 |
T086.502 |
Shower |
T675.501 |
T495.501 |
T385.501 |
T508.501 |
T480.501 |
T000.501 |
T6281 |
T808.501 |
T086.501 |
Valve |
T675.500 |
T495.500 |
T385.500 |
T508.500 |
T480.500 |
T000.500 |
T6280 |
T808.500 |
T086.500 |
|
Reliant+ |
|
Reliant 3 |
|
|
|
w/mod |
|
|
|
Loop |
|
|
|
|
|
Plate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T495.562 T385.522
T495.561 T385.521
T495.560 T385.520
B8
© 2006 American Standard Inc.