PENLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
PENLYN™ WALL-HUNG LAVATORY
•Wall-hung sink
•Vitreous china
•Front overflow
•Integral back splash
•Faucet ledge
Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles
(not included)
Faucet holes on 102mm (4") centers:
0373.027 For wall hanger (included)
0373.050 For concealed arms support
0373.950 For concealed arms support
•Less overflow
Nominal Dimensions:
457 x 403mm (18" x 15-7/8")
Bowl sizes:
340mm (13-3/8") wide 216mm (8-1/2") front to back 127mm (5") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
Color: White
Faucet*:
Faucet Finish:
Supplies:
1-1/4" Trap:
Nipple:
Concealed Arms Support (by others):
* See faucet section for additional models available
FINISHED WALL |
203 mm |
|
(8) |
||
|
||
|
88 mm |
|
|
(3-7/16) |
|
178 mm |
|
|
(7) |
|
|
|
|
|
403 mm |
|
|
|
|
(15-7/8) |
|
|
|
C/L |
|
|
|
|
457 mm |
|
|
|
|
(18) |
|
|
|
|
|
54mm (2-1/8) DIA. |
|
|
|
|
HOLES FOR |
|
|
|
381 mm |
CONCEALED ARMS |
|
|
|
(15) |
C/L OF HANGER |
|
|
|
|
|
|
|
|
267 mm |
ANCHORING SLOTS |
|
|
|
(10-1/2) |
HANGER |
|
|
|
|
|
102 mm |
|
|
|
3 mm |
(4) |
|
|
|
|
|
|
|
(1/8) |
|
|
|
|
|
|
102 mm |
95 mm |
175 mm |
|
|
(4) |
(3-3/4) |
|
|
|
(6-7/8) |
|
|
||
|
|
|
|
|
|
|
|
|
HOLES FOR ANCHOR |
|
|
|
|
SCREWS IN BACK DRAPERY |
|
|
|
203 mm |
SUPPLIES AS REQUIRED |
|
|
|
(8) |
|
787 mm |
|
178 mm |
|
|
(31) |
|
|
|
|
|
|
(7) |
|
|
|
|
|
|
*502 mm |
|
1-1/4 O.D. WASTE |
|
(19-3/4) |
|
|
*460 mm |
|||
|
1-1/4 O.D. TAILPIECE |
|||
|
|
|
|
(18-1/8) |
|
|
FINISHED FLOOR |
|
|
NOTES:
*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
|
M25 |
|
|
© 2008 AS America Inc. |
Revised 8/05 |
||
|
Loading...