HERITAGE
GENERAL DESCRIPTION:
Durable cast brass construction. Amarilis 1/4 turn washerless
ceramic disc valve cartridges. One-half inch male inlet
shanks with brass coupling nuts and shank nuts. All brass
drain bodies with 1-1/4" (32mm) tailpieces. Vandal-resistant
faucets feature vandal-resistant aerators, drains and index
buttons on factory-installed handles. 1.5 gpm/5.7L/min.
maximum flow rate.
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant water
flow of 1.5 gpm throughout the pressure range.
Solid Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Factory Installed Handles: Simplifies installation.
MODEL NUMBER:
5402.142H Centerset Lavatory Faucet
1.5 gpm pressure compensating aerator.
Metal lever handles. Grid drain.
5402.172H Centerset Lavatory Faucet
1.5 gpm pressure compensating aerator.
Brass wrist bade handles. Grid drain.
5402.172V Centerset Lavatory Faucet
1.5 gpm pressure compensating aerator.
Vandal-resistant brass wrist blade handles.
Vandal-resistant aerator. Grid drain.
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc
valve cartridges. Fitting shall be American Standard Model # 5402.____.___ .
Shown without handles.
Faucet comes complete with factory installed handles.
V = Vandal-Resistant, H = Standard
56mm
(2-3/16)
76mm
(3)
90mm
(3-9/16)
137mm
(5-3/8)
44mm
(1-3/4)
22mm
(7/8) DIA.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
51mm
(2)
35mm
(1-3/8) MAX.
32mm
(1-1/4)DIA.
MOUNTING
HOLES
102mm
(4)
TWO-HANDLE CENTERSET LAVATORY FAUCET
WITH CONVENTIONAL SPOUT & FACTORY INSTALLED HANDLES
© 2008 AS A meric a Inc.
L41