HAMPTON™ 5’ INTEGRAL APRON WHIRLPOOL
HIGH GLOSS ACRYLIC
HAMPTON™ 5’ INTEGRAL APRON WHIRLPOOL
2425.218W Whirlpool featuring System I Left Hand Drain Outlet
2425.118W Whirlpool featuring System I Right Hand Drain Outlet
•Acrylic with fiberglass reinforcement
•Integral apron with removable access panel
•Integral three-sided, tiling / water retention flange
•Form-fitted backrest
•1.5 HP single speed, self-draining pump/motor with dry run seal
•Factory-installed power cord with plug
•Eight multi-directional and flow-adjustable jets including:
-Two Ideal-flow jets
-Four body massage jets
-Two recessed back-rest jets
•Deck-mounted air switch On/Off
•Two silent air volume controls
•Quick Connect Safe-T-Heater connection system
•Factory installed and tested whirlpool system
StayClean™ Whirlpool Massage featuring System I
2425.218WC Whirlpool featuring System I Left Hand Drain Outlet
2425.118WC Whirlpool featuring System I Right Hand Drain Outlet
•Same as above except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®
Nominal Dimensions:
60” x 32” x 21-1/2” (1524 x 813 x 546mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ANSI Z124.1 for Plastic Bathtubs
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
To Be Specified - Required:
Color:
Bath Faucet: (specify finish)
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
Safe-T-Heater*: 9075.120
Bath Caddie: 9533.100 (in Chrome only)
Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.
BV-19
3/03 |
© 2003 American Standard Inc. |
Loading...