COLONY
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise® SHOWERHEAD
|
MODEL NUMBER: |
|
TRIM KITS: |
|
T375.128 Colony BATH/SHOWER Trim Kit |
|
Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
T375.248 Colony BATH/SHOWER Trim Kit |
|
Metal Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
T372.128 Colony SHOWER ONLY Trim Kit |
|
Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
T372.248 Colony SHOWER ONLY Trim Kit |
|
Metal Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
ROUGH VALVES: |
|
R110 Pressure Balance Rough Valve Body only |
|
Direct sweat inlets/outlets. LESS trim. |
|
R110SS Pressure Balance Rough Valve Body only |
|
with Screwdriver stops |
|
Direct sweat inlets/outlets. Screwdriver stops. LESS trim. |
T375.128 Bath/Shower Trim Shown |
R115 Pressure Balance Rough Valve Body only |
|
Female thread inlets/outlets. LESS trim. |
R115SS Pressure Balance Rough Valve Body only with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on diverter spout. Available with lever or metal lever handle. Available in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge with back to back capability, and hot limit safety stop. Cycles from “off” to “cold” to “hot”. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. 1/2" inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor.
SUGGESTED SPECIFICATION:
PRODUCT FEATURES:
Flowise Water Saving Showerhead: Saves up to 40% in water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy fine tuning of temperature (125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. 2 piece design allows valve to be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model # T37_.____.____.
B27
© 2008 AS America Inc.
|
|
|
|
|
|
|
|
|
|
|
COLONY |
|
|
|
|
PRESSURE BALANCE BATH/SHOWER FITTING |
|||||||
|
|
|
|
|
|
|
|
WITH FloWise® SHOWERHEAD |
|||
41mm TO 83mm |
|
|
VALVE BODY OPTIONS |
|
|
FLOW RATE* |
Spout |
||||
(1-5/8" TO 3-1/4") |
|
|
|
8 |
|||||||
|
|
|
INLETS |
|
|
|
|
|
|||
|
FINISHED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
103 mm |
|
|
|
|
|
|
|
|
WALL |
|
|
SHR. 1/2" NOM. |
(4-1/16") |
MINUTE |
6 |
|
|
|
|
|
|
|
|
(2-1/32") |
|
|
|
|
|||
|
|
|
|
COPPER SWEAT |
51.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INLETS 1/2" NOM. |
|
PER |
4 |
|
|
|
|
102mm |
|
|
|
COPPER SWEAT |
103 mm |
|
|
|
|
|
|
|
|
|
TUB 1/2" NOM. |
(4-1/16") |
GALLONS |
|
|
|
|
|
|
(4") REF. |
|
|
|
|
0 |
|
|
|
|
||
|
|
|
COPPER SWEAT |
|
|
|
|
|
|||
|
|
|
|
|
2 |
|
|
|
|
||
|
|
|
|
SWEAT (R110) |
|
|
|
|
|
|
|
|
|
|
171mm |
|
149 mm |
|
|
|
|
|
|
|
178mm |
|
(6-3/4") |
|
(5-7/8") |
|
|
|
|
|
|
|
|
|
51 mm |
|
20 |
40 |
60 |
80 |
100 |
||
|
(7") REF. |
|
|
SHR. 1/2" NOM. |
|
||||||
1880mm |
|
|
|
COPPER SWEAT |
(2") |
|
|
I N L E T P R E S S U R E ( P S I ) |
|||
|
|
|
INLETS |
|
|
|
|||||
(74") |
|
|
|
103 mm |
|
|
|||||
|
|
|
1/2" NPT |
|
*Flow rates shown are for mixed hot and cold. |
||||||
FOR HEAD |
152mm |
|
|
TUB 1/2" NOM. |
(4-1/16") |
|
|||||
|
|
|
|
|
|
|
|
|
|||
CLEARANCE |
(6") |
|
|
COPPER SWEAT |
|
CODES AND STANDARDS |
|||||
|
|
SWEAT (STOPS) (R110SS) |
|||||||||
|
|
|
|
||||||||
|
|
|
|
INLETS |
1/2" NPT |
These products meet or exceed the |
|||||
|
|
|
|
|
SHR |
|
|
|
|
|
|
457mm |
|
|
|
86 mm |
|
following codes and standards: |
|||||
(18") |
|
|
|
(3-3/8") |
|
||||||
OPTIONAL |
|
|
86 mm |
|
ASSE 1016 |
|
|
|
|||
|
|
|
|
|
|
|
|
||||
|
38mm |
|
|
(3-3/8") |
INLETS |
ASME A112.18.1 |
|
|
|||
|
|
|
|
|
|
||||||
|
(1-1/2) |
|
|
|
1/2" NPT |
|
|
||||
|
|
|
|
|
1/2" NPT |
CSA B 125 |
|
|
|
||
|
|
|
|
|
TUB PORT |
|
|
|
|
|
|
|
|
|
|
THREADED (R115) |
|
|
|
|
|
|
|
102mm |
|
|
|
|
149 mm |
|
|
|
|
|
|
|
|
|
|
(5-7/8") |
|
|
|
|
|
|
|
(4") |
127mm |
|
|
|
|
• Showerhead with 1.5gpm/5.7L.min. flow restrictor. |
|||||
REF. |
TOP OF |
|
SHR. |
103 mm |
|
|
|
|
|
|
|
|
(5") REF. |
|
|
|
|
|
|
|
|||
|
|
TUB RIM |
|
1/2" NOM. |
(4-1/16") |
|
|
|
|
|
|
|
|
|
COPPER |
|
|
|
|
|
|
|
|
|
BOTTOM |
|
|
SWEAT |
|
|
|
|
|
|
|
|
|
|
TUB 1/2" NOM. |
|
|
|
|
|
|
|
|
|
OF TUB |
|
|
|
|
|
|
|
|
|
|
|
|
|
COPPER SWEAT |
INLETS 1/2" NPT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
THREADED (STOPS) (R115SS) |
|
|
|
|
|
|
|
|
|
109mm |
|
165mm |
|
|
|
|
|
|
|
|
|
(4-1/4") |
|
(6-1/2") |
|
|
|
|
|
|
|
|
|
SHR. |
|
SHR. |
|
|
|
|
|
|
|
|
1/2" NOM. |
|
1/2" NOM. |
|
|
|
|
|
|
|
|
|
COPPER |
52 mm |
COPPER |
52 mm |
|
|
|
|
|
|
|
|
|
SWEAT |
SWEAT |
|
|
|
|
|
|
||
|
|
(2-1/32") |
(2-1/32") |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
104 mm |
|
104 mm |
|
Meets the American Disabilities |
||||
|
|
|
|
|
Act Guidelines and ANSI |
||||||
|
|
|
(4-1/16") |
TUB 1/2" NOM. |
(4-1/16") |
|
|||||
|
|
TUB 1/2" NOM. |
1/2" PEX INLETS |
1/2" PEX INLETS |
|
A117.1 Requirements for the |
|||||
|
|
COPPER SWEAT |
(ASTM F1807) |
COPPER SWEAT |
(ASTM F1807) |
|
physically challenged. |
|
|||
|
|
PEX (R117) |
PEX (STOPS) (R117SS) |
|
|
ROUGH VALVE BODIES TRIM KITS *
|
|
Finish Options |
Product |
|
Polished |
|
Chrome |
|
Number |
Description |
002 |
T375.128 |
Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
|
|
|
T375.248 |
Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
|
|
|
T372.128 |
Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
|
|
|
T372.248 |
Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body. |
|
Product |
|
|
Number |
Description |
|
R110 |
Rough Valve Body less trim. Direct Sweat inlets/outlets. |
|
R110SS |
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops. |
|
R115 |
Rough Valve Body less trim. Female Thread inlets/outlets. |
|
R115SS |
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops. |
|
R117 |
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets. |
|
R117SS |
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops. |
|
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
B28
© 2008 AS America Inc.
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
|
MODEL NUMBER: |
|
R110 Pressure Balance Rough Valve Body only |
|
Direct sweat inlets/outlets. LESS trim. |
|
R110SS Pressure Balance Rough Valve Body only |
|
with Screwdriver stops |
|
Direct sweat inlets/outlets. Screwdriver stops. LESS trim. |
Available Trim Kits |
R115 Pressure Balance Rough Valve Body only |
Female thread inlets/outlets. LESS trim. |
Colony |
|
Tropic |
Dazzle |
Hampton |
Standard |
R115SS Pressure Balance Rough Valve Body only |
||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
with Screwdriver stops |
|
|
|||
|
|
|
|
ffO |
tHo |
|
Female thread inlets/outlets. Screwdriver stops. LESS trim. |
|||||
|
|
|
|
ldCo |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R117 Pressure Balance Rough Valve Body only |
|||||
One |
Town Square |
Enfield |
Amarilis |
PEX inlets/Direct sweat outlets. LESS trim. |
|
|||||||
|
|
|
|
|
|
|
R117SS Pressure Balance Rough Valve Body only |
|||||
|
|
|
|
|
|
|
with Screwdriver stops |
|
|
|||
|
|
|
|
|
|
|
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim. |
|||||
R110 Valve Body Shown |
|
|
|
See reverse for available trim kits. |
|
|||||||
|
|
|
|
|
|
VALVE BODY OPTIONS |
||||||
GENERAL DESCRIPTION: |
|
|
41mm TO 83mm |
|
||||||||
|
|
(1-5/8" TO 3-1/4") |
|
|
INLETS |
|||||||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
FINISHED |
|
|
103 mm |
|
Cast brass body, washerless |
ceramic |
disc valve cartridge |
|
WALL |
1/2" |
|
(4-1/16") |
|||||
|
SHR. 1/2" NOM. |
|
||||||||||
with back-to-back capability and hot limit safety stop. Cycles |
|
|
NPT |
|
||||||||
|
|
|
COPPER SWEAT |
51.5 mm |
||||||||
from "off" |
to |
"cold" |
to "hot". Pressure |
balancing cartridge |
|
|
|
INLETS 1/2" NOM. |
(2-1/32") |
|||
|
|
|
|
|||||||||
maintains |
constant |
output temperature in |
response to |
|
|
|
COPPER SWEAT |
103 mm |
||||
|
|
|
TUB 1/2" NOM. |
(4-1/16") |
||||||||
changes in relative hot and cold supply pressure. One-half |
|
|
|
|
||||||||
|
|
|
COPPER SWEAT |
|
||||||||
inch inlets and outlets (choice of direct sweat, threaded, or |
|
|
|
SWEAT (R110) |
||||||||
PEX). Available with screwdriver stops. Rough-in plaster |
1880mm |
|
|
|
149 mm |
|||||||
guard designed for use as thin-wall mounting adaptor. Valve |
|
|
|
|||||||||
|
|
|
(5-7/8") |
|||||||||
(74") |
|
|
|
|
||||||||
body will accept a variety of decorative Bath/Shower trims. |
FOR HEAD |
|
|
SHR. 1/2" NOM. |
51 mm |
|||||||
|
|
|
|
|
|
|
CLEARANCE |
|
|
COPPER SWEAT |
(2") |
|
|
|
|
|
|
|
|
|
|
|
INLETS |
103 mm |
|
|
|
|
|
|
|
|
|
|
|
1/2" NPT |
||
PRODUCT FEATURES: |
|
|
|
|
|
(4-1/16") |
||||||
|
|
|
|
|
TUB 1/2" NOM. |
|||||||
|
|
|
|
|
|
|||||||
|
|
|
|
|
COPPER SWEAT |
|
||||||
Cast Brass Valve Body: Durable - Quality that will last a |
|
|
|
SWEAT (STOPS) (R110SS) |
||||||||
457mm |
|
|
|
|
||||||||
lifetime. Ideal material for prolonged contact with water. |
|
|
|
SHR |
||||||||
|
|
|
|
|
|
|
(18") |
|
|
INLETS |
1/2" NPT |
|
Ceramic Disc Valve Cartridge: Assures a lifetime of |
|
|
86 mm |
|
||||||||
OPTIONAL |
|
|
||||||||||
|
(3-3/8") |
|
||||||||||
drip-free performance. Allows easy fine tuning of temperature |
|
25mm |
|
86 mm |
|
|||||||
(125˚handle rotation from off to hot). |
|
|
|
|
(3-3/8") |
|
||||||
|
|
|
(1") |
|
INLETS |
|||||||
|
|
|
|
|
||||||||
Pressure Balancing Valve Cartridge: Maintains constant |
|
|
|
|
1/2" NPT |
|||||||
|
|
|
|
1/2" NPT |
||||||||
|
|
|
|
|
|
|
|
|
|
|
TUB PORT |
|
output temperature in response to changes in hot and cold |
|
|
|
THREADED (R115) |
||||||||
supply pressure. Diaphragm system engineered to eliminate |
|
|
|
|
149 mm |
|||||||
cross flow. Avoids failure due to mineral deposits - ideal for use |
|
102mm |
1/2" |
|
(5-7/8") |
|||||||
|
(4") REF. |
|
|
|||||||||
in hard water |
|
|
|
|
|
|
COPPER |
|
|
|||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
TOP OF |
|
SHR. |
103 mm |
||||
|
|
|
|
|
|
|
|
|||||
Back-to-Back Capability: Hot and cold can be reversed |
|
1/2" NOM. |
(4-1/16") |
|||||||||
TUB RIM |
|
COPPER |
|
|||||||||
quickly and easily. |
|
|
|
|
|
|
|
SWEAT |
|
|||
|
|
|
|
|
BOTTOM |
|
TUB 1/2" NOM. |
|
||||
Adjustable Hot Limit Safety Stop: Limits the amount of |
|
|
COPPER SWEAT |
|
||||||||
|
OF TUB |
|
|
INLETS 1/2" NPT |
||||||||
hot water allowed to mix with cold. Reduces the risk of |
|
|
|
THREADED (STOPS) (R115SS) |
||||||||
accidental scalding. |
|
|
|
|
|
109mm |
|
165mm |
||||
Exclusive Plaster Guard: Plaster guard is designed to |
SHR. |
(4-1/4") |
|
(6-1/2") |
||||||||
|
|
SHR. |
|
|||||||||
1/2" NOM. |
|
|
1/2" NOM. |
|
||||||||
protect valve during installation and serve as a mounting plate |
COPPER |
|
52 mm |
COPPER |
52 mm |
|||||||
SWEAT |
|
SWEAT |
||||||||||
for thin-wall installations. 2 piece design allows valve to be |
|
|
(2-1/32") |
|
(2-1/32") |
|||||||
|
|
|
|
|
||||||||
tested prior to trim installation. |
|
|
|
|
|
104 mm |
|
104 mm |
||||
|
|
|
|
|
|
|
|
|
|
|||
Wide Rough-in Range: From 1-5/8" to 3-1/4". |
|
|
(4-1/16") |
|
(4-1/16") |
|||||||
TUB 1/2" NOM. |
1/2" PEX INLETS |
TUB 1/2" NOM. |
1/2" PEX INLETS |
|||||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
COPPER SWEAT |
(ASTM F1807) |
COPPER SWEAT |
(ASTM F1807) |
||
|
|
|
|
|
|
|
|
PEX (R117) |
|
PEX (STOPS) (R117SS) |
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model # ____.____.
B1
© 2008 AS America Inc.