American Standard Ravenna 3459.016, Cadet Elongated 14' Rough-In Toilet 2898.014 User Manual

123.37 Kb
Loading...

CADET™

ELONGATED 14" ROUGH-IN TOILET

VITREOUS CHINA

CADET™ ELONGATED 14" ROUGH-IN TOILET

2898.014

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

14" roughing-in

Elongated siphon action jetted bowl

Fully glazed 2" trapway

AquaForce flushing technology

Close-coupled tank with raised lip detail on tank cover

Color-matched trip lever

Speed Connect® tank/bowl coupling system

Sanitary bar on bowl

2 bolt caps

100% factory flush tested

3459.016 Bowl

4114.016 Tank

Nominal Dimensions:

800 x 495 x 762mm

(31-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

Alternate Tank Configurations Available:

4114.600 Tank complete with tank cover locking device

4114.800 Tank complete with trip lever located on right hand side

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

Color: White Bone Linen Silver

Fawn Beige Black

Seat: American Standard #5324.019 “Rise and Shine” solid plastic closed front, seat with cover.

Seat: American Standard #5311.012 “Laurel” molded closed front seat with cover.

Alternate Seat:

Supply with stop:

©2008 AS America Inc.

FINISHED WALL

 

 

 

800mm

 

 

 

(31-1/2)

 

 

19mm ± 6mm

 

495mm

(3/4 ± 1/4)

 

 

 

279mm

 

(19-1/2)

 

 

 

 

(11)

 

 

 

470mm

 

 

 

(18-1/2)

 

 

 

C/L OF SEAT POST HOLES

 

 

140mm (5-1/2 CENTERS)

 

 

 

 

762mm

 

 

SUPPLY

(30)

 

 

AS

 

133mm 1/4)-(5

 

REQ'D

 

 

381mm

 

 

 

(15)

 

 

 

*222mm(8-3/4)

381mm

 

 

(15)

 

 

152mm

 

 

16mm

(6)

 

 

(5/8)

FINISHED

 

 

 

 

178mm

305mm

FLOOR

241mm

(7)

 

(9-1/2)

(12)

 

356mm

C/L OF OUTLET

 

 

(14)

 

 

 

 

 

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 356MM (14") FROM FINISHED WALL TO C/L OF OUTLET.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K86

Revised 2/08