CADET ELITE™ 6’ x 36”
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
CADET ELITE™ 6’ X 36” WHIRLPOOL
Comfortable bathing design with form-fitted backrest and molded in armrests
2773E (specify White 020, Bone 021, or
Linen 222)
•Acrylic with fiberglass reinforcement
•2.0 HP self-draining pump/motor with dry run seal
•Eight multi-directional and flow adjustable jets including:
Two high performance Ideal-flow™ Jets Six interchangeable Flex-jets™
•Two silent air volume controls
•Deck-mounted On/Off control
•Complete factory installed and tested whirlpool system
2773EC (specify White 020, Bone 021, or Linen 222)
•Same as above with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®
Nominal Dimensions: 72” x 35-3/4” x 19-3/4" (1829 x 908 x 502mm)
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099, or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit, specify White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify White 020, Bone 021, or Linen 222)
Six Foot Apron: 6FT-APRON (specify White 020, Bone 021, or Linen 222)
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
*See American Standard Faucet Selector
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ANSI Z124.1 for Plastic Bathtubs
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.
NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
SPS 2773E
HD-010
Revised 6/03 |
© 2003 American Standard Inc. |