CADET® 3 RIGHT HEIGHT™
ELONGATEDTOILET
VITREOUS CHINA
CADET® 3 RIGHT HEIGHT™ ELONGATED TOILET
2386.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold,
and mildew on the surface
• Features the Cadet® 3 Flushing System
• 16-1/2" rim height for accessible application
• Elongated siphon action jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for superior storage
• Oversized 3" flush valve with chemical resistant flapper
• Chrome trip lever
• Speed Connect® tank-to-bowl coupling system
• Sanitary dam on bowl with four point tank stabilization
• 2 color-matched bolt caps |
|
|
|
|
|
|
• 100% factory flush tested |
|
SEE REVERSE FOR ADDITIONAL ROUGHING-IN |
||||
• 5 year warranty |
|
|||||
|
DIMENSIONS |
|||||
|
|
|||||
3016.016 Right Height™ Elongated Bowl |
|
|
|
|
|
|
4021.016 Tank |
|
|
|
|
|
|
|
To Be Specified: |
|
||||
Nominal Dimensions: |
|
|
||||
|
Color: White Bone Silver Linen Black |
|
||||
768 x 438 x 768mm (30-1/4" x 17-1/4" x 30-1/4") |
|
Seat: #5325.010 Elongated Champion® Slow Close |
|
|||
Fixture only, seat and supply by others |
|
solid plastic seat and cover with easy lift off feature |
|
|||
Alternative Tank Configurations Available: |
|
Seat: #5284.016 Elongated EverClean® solid plastic |
|
|||
|
seat and cover |
|
||||
4021.500 Tank complete with Aquaguard Liner |
|
Seat: #5321.110 EverClean® Elongated Seat with |
|
|||
4021.600 Tank complete with tank cover |
|
Slow Close Snap-Off Hinges |
|
|||
locking device |
|
Supply with stop: |
|
|||
4021.700 Tank complete with Aquaguard Liner |
|
|
|
|
|
|
and tank cover locking device |
|
|
|
|
|
|
4021.800 Tank complete with trip lever located |
|
|
|
|
|
|
on right side |
|
|
|
|
|
|
4021.900 Tank complete with tank cover locking |
|
|
|
|
|
|
device and trip lever located on right side |
|
|
|
|
|
|
4021.950 Tank complete with Aquaguard liner, |
|
|
|
|
|
|
tank cover locking device, and trip lever on |
|
|
|
|
|
|
right side |
NOTES: |
|||||
|
||||||
Compliance Certifications - |
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF |
|||||
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. |
||||||
Meets or Exceeds the Following Specifications: |
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED |
|||||
SEPARATELY. |
||||||
• ASME A112.19.2M for Vitreous China Fixtures - |
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. |
|||||
includes Flush Performance, Ball Pass Diameter, |
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range |
|||||
Trap Seal Depth and all Dimensions |
of tolerances established by ANSI Standard A112.19.2. |
|||||
• Los Angeles Department of Water and Power |
These measurements are subject to change or cancellation. No responsibility is |
|||||
assumed for use of superseded or voided page |
||||||
Supplementary Purchase Specification for |
|
|
|
|
|
|
Non-Adjustability |
|
|
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND |
|||
|
|
|||||
|
|
|
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE |
|||
|
|
|
BUILDING FACILITIES-CHECK LOCAL CODES. |
|||
|
|
|
||||
|
|
K55 |
|
|
||
© 2008 AS America Inc. |
Revised 2/08 |
|||||
|
|
|