CADET® 3 ELONGATED 14"
ROUGH-IN TOILET
VITREOUS CHINA
CADET® 3 ELONGATED 14" ROUGH-IN TOILET
2383.014
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface
•Features the Cadet® 3 Flushing System
•Elongated siphon action jetted bowl
•Fully-glazed 2-1/8" trapway with 2" ball pass
•Generous 9" x 8" water surface area
•Close-coupled tank with flat tank cover for superior storage
•Oversized 3" flush valve with chemical resistant flapper
•Chrome trip lever
•Speed Connect® tank-to-bowl coupling system
•Sanitary dam on bowl with four point tank stabilization
•2 color-matched bolt caps
•100% factory flush tested
•5 year warranty
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
3014.016 Elongated Bowl DIMENSIONS
4027.016 Tank
Nominal Dimensions: |
|
|
|
|
|
|
To Be Specified: |
|
|||
819 x 445 x 737mm |
|
|
|||
(32-1/4" x 17-1/2" x 29") |
|
Color: White Bone Silver Linen Black |
|
||
|
Seat: #5325.010 Elongated Champion® Slow Close |
|
|||
|
|
|
|||
Fixture only, seat and supply by others |
|
solid plastic seat and cover with easy lift off feature |
|
||
|
Seat: #5284.016 Elongated EverClean® solid plastic |
|
|||
Alternative Tank Configurations Available: |
|
seat and cover |
|
||
|
Seat: #5321.110 EverClean® Elongated Seat with |
|
|||
4027.600 Tank complete with tank cover |
|
Slow Close Snap-Off Hinges |
|
||
locking device |
|
|
|||
|
Supply with stop: |
|
|||
4027.800 Tank complete with trip lever |
|
|
|||
|
|
|
|
||
on right side |
|
|
|
|
|
|
|
|
|
||
4027.900 Tank complete with tank cover |
|
|
|
|
|
locking device and trip lever on right side |
|
|
|
|
|
Compliance Certifications - |
|
|
|
|
|
Meets or Exceeds the Following Specifications: |
|
|
|
|
|
• ASME A112.19.2M for Vitreous China Fixtures - |
NOTES: |
||||
includes Flush Performance, Ball Pass Diameter, |
|||||
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF |
|||||
Trap Seal Depth and all Dimensions |
356MM (14") FROM FINISHED WALL TO C/L OF OUTLET. |
||||
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED |
|||||
• Los Angeles Department of Water and Power |
SEPARATELY. |
||||
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. |
|||||
Supplementary Purchase Specification for |
|||||
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range |
|||||
Non-Adjustability |
|||||
of tolerances established by ANSI Standard A112.19.2. |
|||||
|
These measurements are subject to change or cancellation. No responsibility is |
||||
|
assumed for use of superseded or voided pages |
||||
|
|
K65 |
|
|
|
© 2008 AS America Inc. |
Revised 2/08 |
||||
|
|