American Standard 2998.012, 3417.164, 2998.164 User Manual

0 (0)
American Standard 2998.012, 3417.164, 2998.164 User Manual

CADET™ RIGHT HEIGHT™

ELONGATED TOILET

2998.012

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

16-1/2" rim height for accessible applications

Elongated siphon action jetted bowl

AquaForce fl ushing technology

Fully glazed 2" trapway

Close-coupled tank with raised lip detail on tank cover

Color-matched trip lever

Speed Connect™ tank/bowl coupling system

Sanitary bar on bowl

2 bolt caps

100% factory fl ush tested

3417.016 Bowl

4112.016 Tank

2998.164 with Slotted Rim for Bedpan holding

3417.164 Bowl

4112.016 Tank

Alternate Tank Configurations Available:

4112.300 Tank complete with chrome all metal trip lever

4112.500 Tank complete with Aquagard liner

4112.600 Tank complete with tank cover locking device

4112.700 Tank complete with Aquagard liner and tank cover locking device

4112.800 Tank complete with trip lever located on right side

4112.900 Tank complete with tank cover device and trip lever located on right side

Nominal Dimensions:

756 x 495 x 813mm (29-3/4" x 19-1/2" x 32") Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

Color:

Seat: American Standard #5324.019 “Rise and Shine" solid plastic closed front, seat with cover.

Seat: American Standard #5311.012 “Laurel" molded closed front seat with cover.

Alternate Seat:

Supply with stop:

©2006 American Standard Inc.

CADET™ RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

FINISHED WALL

 

 

756mm

 

 

(29-3/4)

 

19mm ± 6mm

 

(3/4 ± 1/4)

 

 

 

225mm

 

 

(8-7/8)

 

 

470mm

 

 

(18-1/2)

 

 

C/L OF SEAT POST HOLES

 

140mm (5-1/2 CENTERS)

83mm 1/4)-(3

 

419mm

 

 

(16-1/2)

 

16mm

 

 

(5/8)

FINISHED

 

 

178mm

311mm

FLOOR

(7)

 

(12-1/4)

 

305mm

C/L OF OUTLET

 

(12)

 

 

 

495mm (19-1/2)

813mm SUPPLY (32)

AS

REQ'D

*254mm(10)

375mm

 

(14-3/4)

152mm

(6)

235mm (9-1/4)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K53

Revised 5/05

Loading...