CADET® 3 FloWise®
ELONGATED TOILET
VITREOUS CHINA
CADET® 3 FloWise® ELONGATED TOILET
2832.128
•Vitreous china
•Meets definition for HET (High Efficiency Toilet)
•High efficiency (4.8 Lpf/1.28 gpf)
•Certified in EPA Water Sense Program
•Qualifies in LEEDS Program
•EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface
•Featuring the Cadet® 3 Flushing System
•Elongated siphon action jetted bowl
•Fully-glazed 2-1/8" trapway
•Generous 9" x 8" water surface area
•Close-coupled tank with flat tank cover for superior storage
•Oversized 3" flush valve with chemical resistant flapper
•Chrome trip lever
•Speed Connect® tank-to-bowl coupling system
•Sanitary dam on bowl with four point tank stabilization
•2 color-matched bolt caps
•100% factory flush tested
•5 year warranty
3014.128 Elongated Bowl
4021.128 Tank |
SEE REVERSE FOR ADDITIONAL ROUGHING-IN |
|
DIMENSIONS |
||
Nominal Dimensions: |
||
|
||
768 x 438 x 733mm (30-1/4" x 17-1/4" x 28-7/8") |
|
|
Fixture only, seat and supply by others |
|
|
To Be Specified: |
||
Alternative Tank Configurations Available: |
||
Color: White Bone Silver Linen Black |
||
4021.513 Tank complete with Aquaguard Liner |
||
Seat: #5325.010 Elongated Champion® Slow Close |
||
4021.613 Tank complete with tank cover |
||
locking device |
solid plastic seat and cover with easy lift off feature |
|
4021.713 Tank complete with Aquaguard Liner |
Seat: #5284.016 Elongated EverClean® solid plastic |
|
and tank cover locking device |
seat and cover |
|
4021.813 Tank complete with trip lever located |
Seat: #5321.110 EverClean® Elongated Seat with |
|
on right side |
Slow Close Snap-Off Hinges |
|
4021.913 Tank complete with tank cover locking |
Supply with stop: |
|
device and trip lever located on right side |
|
|
4021.953 Tank complete with Aquaguard Liner, |
|
|
tank cover locking device and trip lever located |
|
|
on right side |
|
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Trap Seal Depth and all Dimensions
•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability
•Certified in EPA WaterSense HET program
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
|
Certified by |
||
|
IAPMO R&T |
||
|
K77 |
|
|
© 2008 AS America Inc. |
Revised 2/08 |
||
|