American Standard 3409.403, 3409.803, 3409.001 User Manual

0 (0)
American Standard 3409.403, 3409.803, 3409.001 User Manual

ACCLIVITY™

COUNTERTOP SINK

AMERICAST® BRAND ENGINEERED MATERIAL

ACCLIVITY™ COUNTERTOP SINK

Americast® Brand Engineered Material

Acid-resistant porcelain finish

Large bowl area

Self-rimming with cutout template supplied

Chrome overflow trim ring

Shown with lavatory faucet (not included)

3409.001 Center hole only

3409.403 Faucet holes on 4" (102mm) centers (illustrated)

3409.803 Faucet holes on 8" (203mm) centers

Nominal Dimensions:

483mm dia. (19") Round

Bowl sizes:

368mm (14-1/2") wide 302mm (11-7/8") front to back 178mm (7") deep

Americast® Brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.

FINISHED WALL OR SPLASHBACK

102mm

OPTIONAL

(4)

 

 

79mm

 

(3-1/8)

 

241mm

 

(9-1/2)

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.4M for Americast Plumbing Fixtures

ASTM E162 for Flammability

NFPA 258 for Smoke Density

To Be Specified:

Color: White Bone Linen

Silver Fawn Beige Black

Faucet*:

Faucet Finish:

Optional Trim Ring for Overflow: 790730-101 Polished Brass

Supplies:

Trap:

* See faucet section for additional models available

C/L

 

 

 

483mm

 

 

 

 

(19)

 

SEALING

 

10mm

COUNTERTOP

 

(3/8)

(BY OTHERS)

COMPOUND

 

 

 

 

 

 

 

210mm

*356mm *260mm

(8-1/4)

 

 

(14)

(10-1/4)

 

 

 

 

203mm

 

 

 

 

(8)

178mm

 

 

 

 

 

 

(7)

787mm

SUPPLIES

 

 

(31)

 

 

SUGGESTED

AS REQ'D

1-1/4 O.D.

1-1/4 O.D.

FINISHED

 

 

WASTE

TAILPIECE

 

 

FLOOR

 

 

 

 

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.4.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

 

J57

 

© 2008 AS America Inc.

Revised 2/08

 

Loading...