DORAL CHAMPION® 4
ROUND FRONT TOILET
VITREOUS CHINA
DORAL CHAMPION® 4 ROUND FRONT TOILET
2369.014
•Vitreous china
••EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface
•Low-consumption (6.0 Lpf/1.6 gpf)
•Features Champion® 4 Flushing System performance platform
•4" non-adjustable, piston action Accelerator™ flush valve
•Round Front siphon action jetted bowl
•2-3/8" fully-glazed trapway
•Speed Connect® tank/bowl coupling system
•Chrome-plated trip lever
•Sweeping pier on bowl
•100% factory flush tested
•2 bolt caps
•10 year warranty
3110.016 Round Front Bowl
4272.014 Tank
Nominal Dimensions:
721 x 492 x 844mm (28-3/8" x 19-3/8" x 33-1/4")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions
•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability - July, 2003 revision
FINISHED WALL |
|
|
|
|
|
721mm |
|
|
|
|
(28-3/8) |
|
|
|
32mm ± 6mm |
|
|
492mm |
|
(1-1/4 ± 1/4) |
|
|
(19-3/8) |
|
|
216mm |
|
|
|
|
(8-1/2) |
|
|
|
|
419mm |
|
|
|
|
(16-1/2) |
|
|
|
|
|
|
|
356mm |
|
C/L OF SEAT POST HOLES |
|
(14) |
|
|
140mm (5-1/2 CENTERS) |
|
|
|
|
|
|
|
844mm |
|
|
|
SUPPLY |
(33-1/4) |
|
|
|
AS |
|
83mm 1/4)-(3 |
|
|
REQ'D |
|
|
387mm |
|
|
|
|
|
(15-1/4) |
|
|
|
|
|
*254mm(10) |
|
|
16mm |
|
152mm |
|
|
(5/8) |
|
(6) |
|
264mm |
|
FINISHED |
254mm |
|
362mm |
FLOOR |
|
||
(10-3/8) |
|
|
(10) |
|
(14-1/4) |
|
|
||
|
|
|
|
|
305mm |
C/L OF OUTLET |
|
|
|
(12) |
|
|
|
|
To Be Specified:
Color:
White Bone Silver Linen Black
Seat: (please specify color)
Champion® Slow Close Round Front #5330.010
Rise & Shine Round Front #5322.011
EverClean® Round Front Seat with Slow Close Snap-Off Hinges #5320.110
Supply with stop:
©2008 AS America Inc.
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
K25
Revised 2/08