American Standard 4114.016, 2998.014, 4114.600, 4114.800 User Manual

0 (0)
American Standard 4114.016, 2998.014, 4114.600, 4114.800 User Manual

CADET™ RIGHT HEIGHT™ 14" ROUGH-IN ELONGATED TOILET

VITREOUS CHINA

CADET™ RIGHT HEIGHT™ 14" ROUGH-IN ELONGATED TOILET

2998.014

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

16-1/2" rim height for accessible applications

14" roughing-in

Elongated siphon action jetted bowl

AquaForce flushing technology

Fully glazed 2" trapway

Close-coupled tank with raised lip detail on tank cover

Color-matched trip lever

Speed Connect® tank/bowl coupling system

Sanitary bar on bowl

2 bolt caps

100% factory flush tested

3417.016 Bowl

4114.016 Tank

Alternate Tank Configurations Available:

4114.600 Tank complete with tank cover locking device

4114.800 Tank complete with trip lever located on right hand side

Nominal Dimensions:

806 x 495 x 813mm

(31-3/4" x 19-1/2" x 32")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

133mm (5-1/4)

FINISHED WALL

806mm (31-3/4)

19mm ± 6mm

(3/4 ± 1/4) 495mm (19-1/2)

279mm

(11)

 

470mm

 

 

 

(18-1/2)

 

 

 

C/L OF SEAT POST HOLES

 

 

140mm (5-1/2 CENTERS)

 

 

 

 

813mm

 

 

SUPPLY

(32)

 

 

AS

 

 

 

REQ'D

 

 

 

419mm

 

 

 

(16-1/2)

 

 

 

*254mm(10)

375mm

 

 

 

(14-3/4)

 

 

152mm

 

 

16mm

(6)

 

 

(5/8)

FINISHED

 

 

 

 

178mm

311mm

FLOOR

235mm

(7)

 

(9-1/4)

(12-1/4)

 

356mm

C/L OF OUTLET

 

 

(14)

 

 

 

 

 

To Be Specified:

Color: White Bone Linen Silver

Fawn Beige Black

Seat: American Standard #5324.019 “Rise and Shine” solid plastic closed front, seat with cover.

Seat: American Standard #5311.012 “Laurel” molded closed front seat with cover.

Alternate Seat:

Supply with stop:

©2008 AS America Inc.

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 356mm (14") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K83

Revised 2/08

Loading...