ENFIELD™ 2-PC
ELONGATED TOILET
VITREOUS CHINA
ENFIELD™ 2-PC ELONGATED TOILET
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•Elongated siphon jet action bowl with 2” trapway
•Rim height at 15” (381mm)
•AquaForce flushing technology
•Close-coupled tank with Satin Chrome finish top-mounted liftrod actuator
•Includes solid hardwood seat with Satin Chrome hinges and solid hardwood decorative tank cap in either Maple or Cherry finish to match Enfield furniture
•Internal trapway area fully glazed
•100% factory flush tested
•Includes color-matched bolt caps
2860.330 Toilet complete with wood accessories in Cherry finish
2860.334 Toilet complete with wood accessories in Maple finish
2860.000 Toilet combination only without hardwood seat and tank cap
3311.016 Elongated Bowl only |
1 ± 1/4" (25 ± 6mm) |
|
|
|
|
29-3/4" |
|
|
|
|
FINISHED WALL |
|
|
|
4060.016 Tank complete with Satin Chrome |
|
(756mm) |
21-1/4" |
|
8-7/8" |
|
|
||
TANK |
(540mm) |
|
||
(225mm) |
|
|||
finish lift rod actuator |
|
TRIM |
|
|
|
|
|
|
|
9460.000 Tank rail trim, specify Cherry or |
|
C/L OF SEAT POST |
C/L |
|
Maple |
|
|
||
|
MTG HOLES ON |
|
|
|
|
5-1/2" (140mm) CTRS |
16-1/4" |
|
|
5380.295 Solid maple hardwood seat, |
|
19-1/2" |
|
|
|
(413mm) |
|
||
|
|
|
|
|
specify Cherry or Maple |
|
(495mm) |
|
|
|
|
|
30-3/4" |
|
|
|
|
|
(781mm) |
Nominal Dimensions: |
|
|
|
15-1/4" |
29-3/4" x 21-1/4" x 30-3/4" |
|
|
|
|
|
|
|
(387mm) |
|
(756 x 540 x 781mm) |
|
|
"8" |
|
|
|
(203mm) |
|
|
Compliance Certifications - |
|
3/4" (13mm) |
11-1/4" |
FINISHED |
Meets or Exceeds the Following Specifications: |
|
3-1/2" (89mm) |
(286mm) |
FLOOR |
|
14-5/8" (371mm) |
" 6" (152mm) |
||
• ASME A112.19.2M (and 19.6M) for Vitreous |
|
C/L OF SUPPLY |
|
|
|
6-3/8" (162mm) |
|
||
China Fixtures - includes Flush Performance, |
|
AS REQUIRED |
|
|
12" |
C/L OF OUTLET AND |
|
|
|
Ball Pass Diameter, Trap Seal Depth and |
(305mm) |
TOILET MTG BOLTS |
|
|
|
|
|
|
|
all Dimensions |
|
|
|
|
|
NOTES: |
|
To Be Specified |
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM |
|
(12") FROM FINISHED WALL TO C/L OF OUTLET. |
||
|
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. |
|
Color: White Linen |
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance |
|
established by ANSI Standard A112.19.2 |
||
|
||
Decorative toilet angle stop and supply |
These measurements are subject to change or cancellation. No responsibility is assumed for use |
|
of superseded or voided pages. |
in Satin finish
SPS 2860
TB-025
Revised 10/02 |
© 2002 American Standard Inc. |
Loading...