American Standard 2774.018WC, 2774.018W, 2774.002 User Manual

0 (0)
CADET 6 X 42
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
CADET 6 X 42 WHIRLPOOL & BATHING
POOL
2774.018W Whirlpool featuring System I
Acrylic with fiberglass reinforcement
Pre-leveled tub bottom
Dual, molded in arm rests
2.0 HP single speed, self-draining pump/motor
Factory installed power cord with plug
Eight multi-directional and flow-adjustable
jets including:
- Two Ideal-flow jets
- Four body massage jets
- Two recessed back-rest jets
Deck-mounted air switch On/Off
Two silent air volume controls
Quick Connect Safe-T-Heater connection
system
Factory installed and tested whirlpool system
2774.018WC Stay Clean Whirlpool Massage
Featuring System I:
Same as 2774.018W except with the
StayClean whirlpool system featuring
Antimicrobial AlphaSan®
2774.002 Bathing Pool only
Nominal Dimensions: 1829 x 1067 x 502mm
(72 x 42 x 19-3/4")
© 2003 American Standard Inc.
BV-22
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Rev. 3/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
ASME A112.19.7M for Whirlpool Appliances
ANSI Z124.1 for Plastic Bathtubs
ASTM E162 for Flammability
NFPA 258 for Smoke Density
To Be Specified - Required:
Color:
Bath Filler: (specify finish)
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
Safe-T-Heater*: 9075.120
6 Foot Acrylic Apron: 9372.018 (specify color)
6 Foot Apron: 9272.018 (specify color)
Jet Trim Ring Kit: 9860.200-two per kit
(Specify finish)
Universal Tile Bead Kit: 751755-100
Grab Bar Kit: 9822.200-two per kit (specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
Loading...
+ 1 hidden pages