FloWise® DUAL FLUSH ELONGATED TOILET
WITH SEAT
2479.216
•Vitreous china
•Meets definition for HET (High Efficiency Toilet)
•Low-consumption Dual Flush Toilet
•Qualifies in LEEDS Program Full flush 6.0 Lpf/1.6 gpf, Partial flush 3.0 Lpf/0.8 gpf
•Elongated wash down bowl
•Internal trapway fully-glazed, 2-5/8" (67mm) trapway
•Concealed trapway bowl
•Chrome-plated top mounted push button actuator
•Sanitary Dam on bowl
•Includes color-matched plastic seat and cover
•100% factory flush tested
•2 color matched bolt caps
•2 year warranty
2479.516
•Same as above, except with tank with Aquaguard liner
Separate Component Parts:
3067.216 Elongated Bowl
4035.216 Unlined Tank
4035.516 Tank with Aquaguard Liner
Alternate Tank Configurations Available:
4035.516 Lined Tank
Nominal Dimensions:
31-1/4" x 17" x 30-1/8"
(794 x 432 x 765mm)
Fixture and seat only, supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M
•CSA B45 series
•City of Los Angeles Supplemental Purchase Specification
•UNAR
•US EPA WaterSense Specification for HETS
FloWise® DUAL FLUSH
ELONGATED TOILET
VITREOUS CHINA
'*/*4)&% 8"-- |
|
|
|
|
|
NN |
|
|
|
NN NN |
|
|
|
|
|
|
NN |
|
|
|
|
|
|
|
|
|
|
|
|
NN |
|
|
164) |
|
|
|
|
|
#6550/ |
|
NN |
|
$ - |
|
|
|
|
|
|
|
|
|
|
|
|
$ -0' 4&"5 1045 )0-&4 |
|
|
|
|
NN $&/53&4 |
|
|
|
|
|
4611-: |
|
|
|
|
"4 |
|
NN |
|
|
3&2h% |
|
|
NN |
|
|
|
|
|
|
|
||
|
NN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NN |
NN |
|
|
|
|
|
|
|
|
NN |
|
|
|
|
|
|
|
NN |
|
'*/*4)&% |
NN |
|
NN |
|
|
||
|
'-003 |
|
||
|
|
|
|
|
NN |
|
|
|
|
$ -0' 065-&5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12”) FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages
To Be Specified: |
|
|
|
Color: White |
|
|
|
Supply with stop: |
|
|
Certified by |
|
|
|
IAPMO R&T |
|
|
K41 |
|
|
|
|
|
|
|
|
© 2008 AS America Inc. Revised 2/08