STRATFORD™ 5-1/2' WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
STRATFORD 5-1/2' WHIRLPOOL AND BATHING POOL
2470.028W Whirlpool Featuring System I:
•Americast® brand engineered material
•Acid-resistant porcelain finish
•Integral lumbar support with beveled headrest
•Full slip-resistant coverage
•End drain outlet
•1.5 HP single speed, self-draining pump/motor
•Factory installed power cord and plug
•Six multi-directional and flow-adjustable jets
•Deck-mounted air switch On/Off
•Two silent air volume controls
•Quick Connect Safe-T-Heater connection system
•Factory installed and tested whirlpool system
2470.128W Whirlpool Massage featuring System I with Grab Bar Drilling
•Same as 2470.028W except with grab bar drilling (grab bar must be ordered seperately)
2470.028WC StayClean™ Whirlpool Massage featuring System I
•Same as 2470.018W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan®
2470.128WC StayClean™ Whirlpool Massage featuring System I
•Same as 2470.128W except with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan® and grab bar drilling (grab bar must be ordered seperately)
2470.002 Bathing Pool
2470.102 Bathing Pool with Grab Bar Drilling
•Same as 2470.002 except with grab bar drilling (grab bar must be ordered seperately
Nominal Dimensions: 66" x 32" x 20" (1676 x 813 x 508mm)
Bathing Well Dimensions: 60" x 27" x 18" (1524 x 686 x 457mm)
Americast® brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.
To Be Specified - Required:
Color:
Bath Filler: (specify finish)
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
Safe-T-Heater*: 9075.120
Jet Trim Ring Kit: 9860.200-one per kit (specify color) for Body Massage Jets only
Universal Tile Bead Kit: 751755-100
For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ASME A112.19.4M for Americast Fixtures
•ASTM F-462 for Slip-resistant Bathing Facilities
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions shown on reverse side of page.
BV-36
Rev. 4/05 |
© 2005 American Standard Inc. |