YORKVILLE™ 16-1/8" ELONGATED PRESSURE-ASSISTED TOILET
VITREOUS CHINA
BARRIER FREE
YORKVILLE™ 16-1/8" ELONGATED
PRESSURE-ASSISTED TOILET
2325.101
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•Floor-mounted, back-outlet toilet
•Elongated 16-1/8" high bowl
•Pressure-assisted siphon jet flush action
•Side-mounted chrome trip lever
•Close-coupled flushometer tank*
•Speed Connect® tank/bowl coupling system
•4 bolt caps
•Fully glazed 2" ballpass trapway
•10" x 12" water surface area
•100% factory flush tested
3125.016 Elongated 16-1/8" high bowl with four bolt caps and two floor screws
4099.100 Flushometer tank complete with coupling components
Component parts:
735084-400 Tank cover (specify color)
Replaces 2325.100
Nominal Dimensions:
819 x 495 x 803mm (32-1/4" x 19-1/2" x 31-5/8")
Alternate Configurations:
4099.700 Tank and tank cover only with tank cover locking device
4099.800 Tank and tank cover only with right hand trip lever
Fixture only, seat and supply by others Recommended working pressure range 20 psi - 80ps
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified: |
|
|
Color: White |
Bone |
Linen |
Silver |
Fawn |
Beige Black |
Seat: American Standard #5324.019 Elongated “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic closed front seat with cover.
Seat: American Standard #5325.024 Elongated “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic open front seat with cover.
Alternate Seat:
Supply with Stop:
* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co © 2008 AS America Inc.
|
FINISHED WALL |
|
|
|
|
|
|
|
819mm |
|
|
|
|
|
19mm ± 6mm |
(32-1/4) |
|
|
|
|
|
|
|
|
495mm |
|
|
|
(3/4 ± 1/4) |
|
|
|
|
|
|
|
|
|
(19-1/2) |
|
|
|
|
|
|
|
|
|
|
279mm |
|
|
|
|
|
|
(11) |
|
|
|
|
|
|
|
470mm |
|
|
|
|
|
|
(18-1/2) |
|
|
|
|
|
|
C/L OF SEAT |
|
|
C/L |
|
|
|
POST HOLES |
|
|
381mm |
|
|
|
140 mm (5-1/2) |
|
|
|
|
|
|
CENTER |
|
|
(15) |
|
|
|
|
|
|
|
803mm |
1/2) |
|
|
|
|
FLEX |
(31-5/8) |
|
410mm |
|
SUPPLY |
|
||
|
(16-1/8) |
|
AS REQ. |
|
||
(2- |
*222mm |
|
13 x 19mm |
|||
102 mm |
152 mm |
|
||||
64mm |
(8-3/4) |
|
(1/2 x 3/4) |
|||
(4) |
|
|||||
|
|
(6) |
|
|||
|
|
|
|
|
SLOTS |
|
|
|
|
|
|
|
|
|
|
|
|
76mm |
|
76mm |
|
|
|
|
(3) |
|
(3) |
|
|
C/L OF |
|
|
|
|
|
|
WASTE |
|
|
235mm |
|
|
|
OUTLET |
|
|
|
|
|
|
|
|
(9-1/4) |
|
|
|
|
|
|
|
|
324mm |
|
C/L OF 1/2" DIA |
HOLES |
FINISHED |
|
152mm (6) CENTERS |
|||
(12-3/4) |
|
FLOOR |
||
|
|
|
648mm (25-1/2)
NOTES:
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITEFELT (WAX RING NOT RECOMMENDED).
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
M42
Revised 2/08