American Standard 3797.016, 4707.016, 2797.016 User Manual

0 (0)
American Standard 3797.016, 4707.016, 2797.016 User Manual

TOWN SQUARE®

RIGHT HEIGHT™ELONGATED TOILET

VITREOUS CHINA

TOWN SQUARE® RIGHT HEIGHT™

ELONGATED TOILET

2797.016

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

Elongated siphon action jetted bowl with 2" trapway

AquaForce flushing technology

16-1/2" Rim height for accessible applications

American classic styling on bowl and tank design matched to pedestal and countertop lavatories

Front-mounted chrome trip lever design matched to Town Square faucets

Design matched molded elongated Town Square seat and cover (5725.027) included

2 bolt caps

Internal trapway area fully glazed

• 100% factory flush tested

25 ± 6mm (1 ± 1/4)

 

 

 

FINISHED WALL

743mm

508mm

 

3797.016 Bowl

203mm

(29-1/4)

(20)

 

(8)

 

 

 

 

 

 

 

4707.016 Tank

 

 

 

 

Nominal Dimensions:

 

C/L OF SEAT POST

C/L

 

743 x 508 x 857mm

 

 

 

MTG HOLES ON

 

 

(29-1/4" x 20" x 33-3/4")

 

140mm (5-1/2) CTRS

 

 

 

 

391mm

 

 

 

483mm

(15-3/8)

857mm

 

 

 

 

 

(19)

 

(33-3/4)

Fixture and seat only, supply by others

 

 

 

 

Compliance Certifications -

 

 

 

429mm

Meets or Exceeds the Following Specifications:

 

 

 

 

 

 

(16-7/8)

• ASME A112.19.2M for Vitreous China Fixtures -

 

 

* 203mm

 

 

 

(8)

 

includes Flush Performance, Ball Pass Diameter,

 

 

 

 

Trap Seal Depth and all Dimensions

 

13mm (1/2)

273mm

FINISHED

 

 

89mm (3-1/2)

(10-3/4)

FLOOR

 

 

 

* 152mm (6)

 

 

381mm (15)

 

 

 

 

 

 

 

 

 

 

 

 

152mm (6)

C/L OF SUPPLY

305mm

 

 

 

 

 

C/L OF OUTLET AND

AS REQUIRED

 

 

 

 

 

 

(12)

 

 

 

 

 

TOILET MTG BOLTS

 

To Be Specified:

Color:

White Bone Silver Linen Black

Alternate Seat:

Supply with stop:

© 2008 AS America Inc.

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

K45

Revised 2/08

Loading...