American Standard 0490.156, 0490.019, 0490.011, 0490.027, 0490.035 User Manual

0 (0)
American Standard 0490.156, 0490.019, 0490.011, 0490.027, 0490.035 User Manual

BARRIER FREE

RONDALYN™ COUNTERTOP SINK

VITREOUS CHINA

RONDALYN™ COUNTERTOP SINK

Made from vitreous china

Self-rimming with cutout template supplied

Front overflow

Faucet ledge

Shown with 4801.862 Amarilis/Heritage faucet with Triune cross handles (not included)

0490.011 Faucet holes on 8" (203mm) centers

 

 

 

 

 

(illustrated)

 

 

 

 

 

 

 

 

0491.019 Faucet holes on 4" (102mm) centers

 

 

 

 

 

0491.027 Faucet holes on 4" (102mm) centers

 

 

 

 

 

• Extra right-hand hole

 

 

 

 

 

 

 

0491.035 Faucet holes on 4" (102mm) centers

 

 

 

 

 

• Extra left-hand hole

 

 

 

 

 

 

 

0490.156 Center hole only

 

 

 

 

610mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

102mm

(24)

 

Nominal Dimensions:

 

 

203mm

OPTIONAL

 

 

 

 

(4)

 

 

 

 

(8)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

486mm (19-1/8") Round

 

 

 

83mm

 

 

 

 

 

 

 

 

(3-1/4)

 

 

 

 

 

FINISHED

 

 

184mm

 

 

 

 

 

 

 

(7-1/4)

 

 

 

Bowl sizes:

 

WALL

 

 

 

 

 

 

 

 

 

 

 

 

 

OR

 

 

 

 

 

 

381mm (15") wide

 

SPLASH BACK

 

 

 

 

 

 

 

 

 

 

 

203mm

 

308mm (12-1/8") front to back

 

 

 

 

 

 

 

(8)

 

DRAWING FOR

 

 

 

 

 

 

 

146mm (5-3/4") deep

 

 

C/L

 

MIN.

 

DIMENSIONAL

 

 

 

 

 

IT IS NOT AN EXACT

 

 

 

 

 

 

 

 

PURPOSES ONLY.

 

 

 

 

 

851mm

 

REPRESENTATION.

 

 

 

 

 

(33-1/2)

 

 

Compliance Certifications -

 

 

 

686mm

 

 

Meets or Exceeds the

 

 

 

 

 

 

 

 

 

 

(27)

 

 

Following Specifications:

 

(19-1/8)

 

MIN.

 

(6)

 

 

 

 

 

 

 

 

486mm

 

 

 

152mm

• ASME A112.19.2M for

COUNTERTOP (BY OTHERS)

 

 

 

 

MAX.

 

 

 

 

 

 

 

SEALING

 

11mm

 

 

 

Vitreous China Fixtures

 

COMPOUND

 

 

BARRIER FREE

 

 

(7/16)

 

 

 

 

 

 

 

 

 

 

CLEARANCE

229mm

 

 

 

 

 

 

 

 

(9)

 

 

*273mm

 

 

 

 

 

MIN.

 

 

 

 

187mm

 

 

 

 

 

(10-3/4)

 

 

(7-3/8)

 

 

 

 

 

*318mm

 

 

 

 

 

 

 

 

(12-1/2)

 

 

 

 

 

 

 

 

 

 

 

178mm

 

 

 

 

 

SUPPLIES

203mm

(7)

 

 

 

 

 

(8)

 

 

 

 

 

 

AS REQ'D.

 

 

 

 

 

 

 

 

 

 

 

To Be Specified:

Bone

 

FINISHED

787mm (31)

 

 

 

Color: White

1-1/4 O.D.

851mm (33-1/2)

 

 

 

 

 

 

 

 

 

 

 

Linen

Silver

WASTE

FLOOR

 

 

 

 

1-1/4 O.D.

 

 

 

 

 

 

 

 

 

Fawn Beige

Black

TAILPIECE

 

 

 

 

 

 

 

 

 

 

 

Faucet*:

 

 

 

SEE REVERSE FOR ADDITIONAL ROUGHING-IN

Faucet Finish:

 

 

 

Supplies:

 

 

 

DIMENSIONS

 

 

 

 

1-1/4" Trap:

 

 

 

 

 

 

 

 

 

 

 

NOTES:

 

 

 

* See faucet section for additional models available

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE

 

 

 

SUGGESTED.

 

 

 

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

 

 

 

TEMPLATE SUPPLIED WITH SINK.

 

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

 

SEPARATELY.

 

AND ANSI A117.1 ACCESSIBLE AND USABLE

SEALING COMPOUND SUPPLIED BY OTHERS.

 

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range

 

 

Install lavatory 864mm (34") from finished floor.

 

Lavatory installed 51mm (2") minimum from front edge

of tolerances established by ANSI Standard A112.19.2.

 

These measurements are subject to change or cancellation. No responsibility is

 

of countertop provides 686mm (27") knee clearance area.

assumed for use of superseded or voided pages.

 

 

 

J45

 

© 2008 AS America Inc.

Revised 2/08

 

Loading...
+ 1 hidden pages