RENAISSANCE™ ROUND FRONT TOILET
2241.016
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•305mm (12") rough-in
•Round front bowl
•Close-coupled tank
•Color matched trip lever
•2 bolt caps
•100% factory fl ush tested
3338.011 Bowl
4037.017 Tank
Nominal Dimensions:
693 x 505 x 752mm (27-5/16" x 19-7/8" x 29-5/8")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions
84mm (3-5/16)
RENAISSANCE™
ROUND FRONT TOILET
VITREOUS CHINA
|
|
FINISHED WALL |
|
|||
|
|
|
|
|
693mm |
|
(27-5/16) |
|
|||||
|
|
17mm ± 6mm |
|
|||
|
|
(11/16 ±1/4) |
232mm |
505mm |
||
|
|
|
|
|
||
|
|
|
|
|
(19-7/8) |
|
|
|
|
|
|
(9-1/8) |
|
|
|
|
|
|
|
|
425mm
C/L
(16-3/4)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
|
|
|
752mm |
|
|
|
SUPPLY |
(29-5/8) |
|
|
|
|
||
|
|
AS |
|
|
|
|
REQ'D |
|
|
|
|
383mm |
|
|
|
|
(15-1/16) |
|
|
|
|
*203mm |
375mm |
|
|
|
(8) |
(14-3/4) |
|
|
|
|
||
|
16mm |
152mm |
|
|
|
(5/8) |
(6) |
|
|
|
308mm |
FINISHED |
232mm |
|
159mm |
FLOOR |
|||
(9-1/8) |
||||
(6-1/4) |
(11-1/4) |
|
||
|
|
305mm
(12)C/L OF OUTLET
To Be Specified:
Color: White Bone
Seat: American Standard #5322.011 “Rise and Shine" solid plastic closed front seat with cover.
Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover.
Alternate Seat:
Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
|
K75 |
|
|
© 2006 American Standard Inc. |
Revised 5/05 |
||
|