American Standard 0211.100, 0211.008, 0211.800, 0211.400, 3801.452 User Manual

0 (0)
American Standard 0211.100, 0211.008, 0211.800, 0211.400, 3801.452 User Manual

REMINISCENCE™

PEDESTAL SINK

VITREOUS CHINA

REMINISCENCE™ PEDESTAL SINK

Vintage-styled basin with raised motif backsplash and design-coordinated pedestal

Made from vitreous china

Rear overflow

Supplied with mounting kit

Design matched to Reminiscence toilet

Faucet ledge

Shown with 3801.452 Amarilis Jasmine faucet and handles (not included)

0211.800 Faucet holes on 8" (203mm) centers (Illustrated)

0211.400 Faucet holes on 4" (102mm) centers

0211.100 Center hole only

Nominal Dimensions:

660 x 508 x 864mm (26" x 20" x 34")

Separate Components:

0211.008 Pedestal top-8" (203mm) centers

0211.004 Pedestal top-4" (102mm) centers

0211.001 Pedestal top-center hole only

734900-400 Pedestal only

 

552mm

 

FINISHED

(21-3/4)

 

 

 

WALL

203mm

10mm

 

(8)

 

(3/8)

 

 

140mm

 

108mm

(5-1/2 REF.)

 

(4-1/4)

206mm

PEDESTAL (8-1/8) TO WALL CLEARANCE

508mm

(20)

PEDESTAL ANCHORING

C/L

SCREW HOLES

 

8mm (5/16) DIA.

Bowl sizes:

476mm (18-3/4") wide 292mm (11-1/2") front to back 133mm (5-1/4") deep

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures

To Be Specified:

 

Color: White

Bone Linen

Silver

Fawn Beige Black

Faucet*:

Faucet Finish:

Supplies:

1-1/4" Trap:

* See faucet section for additional models available

© 2008 AS America Inc.

660mm

 

(26)

70mm

260mm

(2-3/4)

(10-1/4)

 

 

DRAIN

 

CHASE

178mm

 

(7)

 

 

19mm (3/4) DIA.

 

HOLES FOR

 

 

ANCHOR BOLTS

 

203mm

 

178mm

(8)

 

 

 

(7)

SUPPLIES

 

 

AS REQ'D

 

 

1-1/4 O.D.

 

 

WASTE

864mm

 

1-1/4 O.D

 

(34)

 

TAILPIECE

REF.

 

*597mm

400mm

 

(23-1/2)

 

*546mm

(15-3/4)

 

(21-1/2)

 

 

FINISHED

 

 

FLOOR

 

 

210mm

PEDESTAL

 

SIDE SECTION

 

(8-1/4)

 

 

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.

PEDESTAL ANCHORING SCREWS NOT INCLUDED.

SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

J2

Revised 2/08

Loading...