RAVENNA™ ROUND FRONT TOILET
2648.016
•Vitreous china
•Low-consumption (6.0 Lpf/1.6 gpf)
•Round front siphon action jetted bowl
•Fully glazed 2" trapway
•AquaForce fl ushing technology
•D-shaped style tank with fi tted tank cover
•Chrome trip lever
•Speed Connect™ tank/bowl coupling system
•Sanitary bar on bowl
•2 color matched bolt caps
•100% factory fl ush tested
•Design coordinated to Ravenna pedestal lavatory
3454.016 Bowl
4096.016 Tank
Alternate Tank:
4096.516 with Aquaguard tank liner
Nominal Dimensions:
699 x 476 x 737mm
(27-1/2" x 18-3/4" x 29")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimension
RAVENNA™
ROUND FRONT TOILET
VITREOUS CHINA
FINISHED WALL |
|
|
|
|
699mm |
|
|
|
(27-1/2) |
|
|
19mm ± 6mm |
|
476mm |
|
(3/4 ± 1/4) |
|
|
|
|
222mm |
|
(18-3/4) |
|
|
|
|
|
(8-3/4) |
|
|
|
419mm |
|
|
|
(16-1/2) |
|
C/L |
|
|
|
|
|
C/L OF SEAT POST HOLES |
|
|
|
140mm (5-1/2 CENTERS) |
|
|
|
|
|
737mm |
|
|
SUPPLY |
(29) |
|
|
AS |
|
83mm 1/4)-(3 |
|
REQ'D |
|
|
381mm |
|
|
|
|
(15) |
|
|
|
*222mm(8-3/4) |
381mm |
|
|
(15) |
|
|
|
152mm |
|
|
16mm |
(6) |
|
|
(5/8) |
FINISHED |
|
|
|
|
|
178mm |
305mm |
FLOOR |
241mm |
(7) |
|
(9-1/2) |
|
(12) |
|
||
|
|
|
|
305mm |
C/L OF OUTLET |
|
|
(12) |
|
|
|
|
|
|
To Be Specified:
Color:
Seat: American Standard #5322.011 “Rise and Shine" solid plastic, closed front, round front seat with cover.
Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover.
Alternate Seat:
Supply with stop:
©2006 American Standard Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
K64
Revised 5/05