PRINCETON™ RECESS BATH W/ LUXURY
LEDGE AND INTEGRAL OVERFLOW
BARRIER FREE |
AMERICAST® BRAND ENGINEERED MATERIAL |
|
|
|
|
PRINCETON™ RECESS BATH W/ LUXURY LEDGE AND INTEGRAL OVERFLOW
for Above Floor Rough Installation
Americast® brand engineered material
2396.202 ICH (Chrome Trim)
Left Hand Outlet for above floor installation
2396.202 ICHTC Same as above with Tub Cover
2397.202 ICH (Chrome Trim)
Right Hand Outlet for above floor installation
2397.202 ICHTC Same as above with Tub Cover
2396.202 IPB (Polished Brass Trim) Left Hand Outlet
2396.202 IPBTC Same as above with Tub Cover
2397.202 IPB (Polished Brass Trim)
Right Hand Outlet
2397.202 IPBTC Same as above with Tub Cover
2396.202 IBS (Brushed Satin Trim) Left Hand Outlet
2396.202 IBSTC Same as above with Tub Cover
2397.202 IBS (Brushed Satin Trim)
Right Hand Outlet
2397.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included |
Photograph details integral overflow and drain |
|
with bath |
||
assembly. Drain assembly included with bath. |
||
• Escutcheon included and installed on bath |
||
|
||
• Acid resistant porcelain finish |
|
|
• Recess bath with integral apron and |
To Be Specified: |
|
tiling flange |
||
Color: |
||
• Integral lumbar support |
||
Bath Filler: (specify finish) |
||
• Beveled headrest |
||
Bath Drain: 1583.470 (specify finish) |
||
• Extra wide ledge for placement of toiletries |
||
|
||
• Full slip-resistant coverage |
To Be Specified - Optional: |
|
• End drain outlet |
Pressure Test Kit†: 791363-0070A |
|
Nominal Dimensions: |
|
|
*See faucet section for additional models available |
||
1524 x 864 x 445mm |
† Pressure Test Kit is necessary to seal overflow and perform |
|
system pressure test. |
||
(60" x 34" x 17-1/2") |
||
|
Bathing Well Dimensions:
1423 x 635 x 337mm (56" x 25" x 13-1/4")
Americast® brand engineered material is a composition of porcelain bonded to enameling grade metal, bonded to a patented structural composite.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.4 for Americast Plumbing Fixtures
•ASTM F-462 for Slip-resistant Bathing Facilities
•ANSI Z124.1 Ignition Test
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
© 2008 AS America Inc.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIES-CHECK LOCAL CODES. INSTALL WITH SEAT AT HEAD END.
SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS
H121
Revised 2/08