American Standard 6542.145, 6540.17, 6542.14, 6542.175, 6542.17 User Manual
...
Installation
Instructions
SPREAD LAVATORY
FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-- please read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1M M968508 REV.1.3
Recommended tools
Screwdriver |
Channel Locks |
Adjustable Wrench |
Tubing Cutter |
1 |
|
|
|
SPOUT OR BASE ASSEMBLY |
CAUTION |
Turn off water at |
|
|
main supply. |
||
|
|
|
|
Insert SPOUT SHANK (1) through center hole of mounting surface, making sure RUBBER GASKET (2) is properly positioned in SPOUT BASE (3).
Assemble RUBBER WASHER (4), BRASS WASHER (5), and LOCKNUT (6) onto threads of SPOUT SHANK (1) from underside of mounting surface.
Align SPOUT (7) and tighten LOCKNUT (6). Be sure slot in BRASS WASHER (5) is positioned to the rear as shown.
7
3
2
1
1a TO CHANGE SPOUT TO A SWIVEL SPOUT:
Unscrew SPOUT NUT (8) and remove SPOUT (7).
Take SPOUT CLIP (9) off SPOUT (7) and remove RUBBER RING (10).
Replace RUBBER RING (10) with seperate PLASTIC RING (11) packed with faucet.
Put SPOUT CLIP (9) on SPOUT (7).
Reassemble SPOUT (7) to SPOUT BASE (3).
7
8
10
9
3
11
4
5
6
Loading...