American Standard Evolution 2425V-LHO, Evolution 2425V-LHO.002, Evolution 2425V-RHO.002, 9075.120 User Manual

Size:
481.56 Kb
Download

EVOLUTION™ 5' X 32" IA-LHO /RHO

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

EVOLUTION™ 5' X 32" IA-LHO /RHO

Comfortable bathing design with form-fittedbackrest andmolded-inarmrests

2425VC-LHOBuilt-InIntegral Apron Left Hand Drain Outlet (specify color)

2425VC-RHOBuilt-InIntegral Apron Right Hand Drain Outlet (specify color)

EverClean® System

Acrylic with fiberglass reinforcement

Integral apron with removable access panel

Integral three-sided,tiling/water retention flange

1.25 HP self-drainingpump/motor

Eight flow adjustable jets including:

-Two adjustable Comfort Jets™ Hi Flo

-Six adjustable Comfort Jets™

Two silent air volume controls

Side-mountedOn/Off control

Deep Soak Overflow Drain for maximum water depth

Complete factory installed and tested whirlpool system

2425V-LHOBuilt-InIntegral Apron Left Hand Drain Outlet (specify color)

2425V-RHOBuilt-InIntegral Apron Right Hand Drain Outlet (specify color)

Same as above without the EverClean® System

 

2425V-LHO.002Bathing Pool

Components Required:

 

 

 

2425V-RHO.002Bathing Pool

Bath Filler*: (specify finish)

Bath Drain: 1599.205.XXX (specify color)

 

 

Nominal Dimensions:

Custom Accessories Available:

60" x 32" x 21-1/2"

Safe-T-Heater:9075.120

(1524 x 813 x 546mm)

 

* See American Standard Faucet Selector

 

Compliance Certifications -

Meets or Exceeds the Following Specifications:

Underwriters Laboratories - Hydromassage Bathtubs UL 1795

ASME A112.19.7M for Whirlpool Appliances

ANSI Z124.1 for Plastic Bathtubs

ASTM E162 for Flammability

NFPA 258 for Smoke Density

American Standard whirlpools with EverClean® incorporate a patentedsilver-ionadditive right into the circulation piping to protect the pipes

from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.

NOTE: Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

SEE REVERSE FOR ROUGHING-INDIMENSIONS AND PRODUCT SPECIFICATIONS

 

H89

 

© 2008 AS America Inc.

Revised 3/06

 

60 x 32 x 20-1/2 (1524 x 813 x 521mm) 77 Lbs. (35 Kg.)
661 Lbs. (299 Kg.)
70 Gal. (265 L.)
42 x 22 In. (1067 x 559mm)

EVOLUTION™ 5' X 32" IA-LHO /RHO WHIRLPOOL AND BATHING POOL

HIGH GLOSS

Model 2425V-LHOshown

60"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1524mm)

10-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(267mm)

 

 

 

 

 

 

3"

 

 

 

 

 

7-1/2"

 

 

 

 

 

 

2-7/8"

 

 

(76mm)

(191mm)

 

 

(73mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16"

(406mm)

6"

(152mm)

32" CUT OUT IN FLOOR (813mm)

FOR DRAIN

 

13-1/2"

 

(343mm)

32"

 

(813mm)

C/L OF

 

 

OVERFLOW

21-1/2"(546mm)

20-1/2"(H)(521mm)

19-1/8"(A)(486mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2425V WHIRLPOOL

INSTALLED SIZE

 

 

 

 

 

60 x 32 x 20-1/2(1524 x 813 x 521mm)

 

 

 

 

 

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

92 Lbs. (42 Kg.)

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

 

 

675 Lbs. (306 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

 

 

 

70 Gal. (265 L.)

WHIRLPOOL MIN. OPERATING VOL.

 

 

 

 

 

 

 

 

39 Gal. (148 L.)

 

 

 

 

 

 

 

 

BATHING WELL AT SUMP

 

 

 

 

 

 

42 x 22 In. (1067 x 559mm)

 

 

 

 

 

 

BATHING WELL AT RIM

 

 

 

 

 

53 x 25-1/2In. (1346 x 648mm)

 

 

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

 

 

17-1/2(445mm)

 

 

 

 

 

 

 

 

FLOOR LOADING

 

 

 

 

 

51 Lbs./Sq.Ft. (247 Kgs./Sq.m)

 

 

 

 

 

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

 

 

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.25 HP, 9.7 AMPS,120V.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GENERAL SPECIFICATIONS FOR 2425V BATHING POOL

INSTALLED SIZE WEIGHT

WEIGHT w/WATER GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

 

 

 

53 x 25-1/2In. (1346 x 648mm)

WATER DEPTH TO OVERFLOW

 

 

 

17-1/2(445mm)

 

 

 

FLOOR LOADING

 

 

50 Lbs./Sq.Ft. (242 Kgs./Sq.m)

(PROJECTED AREA)

 

 

 

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

 

H90

 

© 2008 AS America Inc.

Revised 3/06