American Standard 4021.513, 2832.128, 3014.128, 4021.613 User Manual

0 (0)
American Standard 4021.513, 2832.128, 3014.128, 4021.613 User Manual

CADET® 3 FloWise®

ELONGATED TOILET

VITREOUS CHINA

CADET® 3 FloWise® ELONGATED TOILET

2832.128

Vitreous china

Meets definition for HET (High Efficiency Toilet)

High efficiency (4.8 Lpf/1.28 gpf)

Certified in EPA Water Sense Program

Qualifies in LEEDS Program

EverClean® surface inhibits the growth of stainand odor-causing bacteria, mold, and mildew on the surface

Featuring the Cadet® 3 Flushing System

Elongated siphon action jetted bowl

Fully-glazed 2-1/8" trapway

Generous 9" x 8" water surface area

Close-coupled tank with flat tank cover for superior storage

Oversized 3" flush valve with chemical resistant flapper

Chrome trip lever

Speed Connect® tank-to-bowl coupling system

Sanitary dam on bowl with four point tank stabilization

2 color-matched bolt caps

100% factory flush tested

5 year warranty

3014.128 Elongated Bowl

4021.128 Tank

SEE REVERSE FOR ADDITIONAL ROUGHING-IN

DIMENSIONS

Nominal Dimensions:

 

768 x 438 x 733mm (30-1/4" x 17-1/4" x 28-7/8")

 

Fixture only, seat and supply by others

 

To Be Specified:

Alternative Tank Configurations Available:

Color: White Bone Silver Linen Black

4021.513 Tank complete with Aquaguard Liner

Seat: #5325.010 Elongated Champion® Slow Close

4021.613 Tank complete with tank cover

locking device

solid plastic seat and cover with easy lift off feature

4021.713 Tank complete with Aquaguard Liner

Seat: #5284.016 Elongated EverClean® solid plastic

and tank cover locking device

seat and cover

4021.813 Tank complete with trip lever located

Seat: #5321.110 EverClean® Elongated Seat with

on right side

Slow Close Snap-Off Hinges

4021.913 Tank complete with tank cover locking

Supply with stop:

device and trip lever located on right side

 

4021.953 Tank complete with Aquaguard Liner,

 

tank cover locking device and trip lever located

 

on right side

 

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Trap Seal Depth and all Dimensions

Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability

Certified in EPA WaterSense HET program

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

 

Certified by

 

IAPMO R&T

 

K77

 

© 2008 AS America Inc.

Revised 2/08

 

Loading...
+ 1 hidden pages