Size:
133.29 Kb
Download

CADET® 3 ROUND FRONT TOTAL TOILET

2880.000

Vitreous china

Low-consumption(6.0 Lpf/1.6 gpf)

12" Rough-in(305mm)

EverClean® surface inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface

Features the Cadet® 3 Flushing System

Space saving round front siphon action jetted bowl

Fully-glazed2-1/8"trapway with 2" ball pass

Generous 9" x 8" water surface area

Close-coupledtank with flat tank cover for superior storage

Oversized 3" flush valve with chemical resistant flapper

Chrome trip lever

Speed Connect® tank-to-bowlcoupling system

Sanitary dam on bowl with four point

tank stabilization

• 2 color-matchedbolt caps

• Color matched solid plastic seat and cover with EverClean® surface

Wax ring gasket with closet bolts

100% factory flush tested

5 year warranty

Nominal Dimensions:

718 x 438 x 733mm (28-1/4"x17-1/4"x28-7/8")

Compliance Certifications -

102mm (4)

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability

CADET® 3 ROUND FRONT TOTAL Toilet

VITREOUS CHINA

 

718mm

 

 

FINISHED WALL

(28-1/4)

 

 

 

 

 

25mm ± 6mm

 

 

 

(1 ± 1/4)

 

 

 

216mm

 

 

438mm

 

 

(17-1/4)

(8-1/2)

 

 

 

 

 

 

416mm

 

 

 

(16-3/8)

 

 

 

C/L OF SEAT POST HOLES

733mm

 

140mm (5-1/2CENTERS)

 

 

SUPPLY

(28-7/8)

 

 

 

 

 

AS

 

 

 

REQ'D.

 

 

 

*381mm

 

 

 

(15)

 

 

 

*203mm

352mm

 

 

(8)

(13-7/8)

216mm

333mm

 

235mm

FINISHED

(9-1/4)

(8-1/2)

(13-1/8)

FLOOR

*152mm

 

 

305mm

C/L OF OUTLET

 

(6)

(12)

 

 

 

To Be Specified:

Color: White

Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-INAT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

 

K100

 

© 2008 AS America Inc.

Revised 2/08