American Dryer Corp ADS-50S, ADG-50DS, AD-50, ADE-50S User Manual

0 (0)

SUPER AD-50 Parts Manual

24 VAC

1994 thru 2001

MODELS: ADG-50DS

ADE-50S

ADS-50S

American Dryer Corporation

88 Currant Road

Fall River, MA02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450302

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

__________________________________________

SUPER AD-50

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

 

Control DoorAssembly Without Trim

 

For Non-Coin Models Mfd. as of July 13, 1998 ...............................................................................

3

High Security Control DoorAssembly

 

For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ...........................................

4

Phase 5 Coin Microprocessor Control PanelAssembly ...........................................................................

5

Phase 5 Non-Coin Microprocessor Control PanelAssembly ...................................................................

6

Phase 5 Coin and Non-Coin Microprocessor Control BoxAssembly ......................................................

7

Dual Timer “Tap Touch” Controls

 

For Models Mfd. as of November 3, 2000 .......................................................................................

8

DualTimer Control PanelAssembly

 

For Models Mfd. prior to November 3, 2000 ...................................................................................

9

DualTimer Control BoxAssembly ........................................................................................................

10

Non-Microprocessor Coin Meter Control PanelAssembly ....................................................................

11

Non-Microprocessor Coin Meter Control BoxAssembly ......................................................................

12

Coin Meter Replacement Parts .............................................................................................................

13

CoinVaultAssembly .............................................................................................................................

14

“Plastic” Main DoorAssembly ..............................................................................................................

15

Main Door SwitchAssembly For “Plastic” Door ...................................................................................

16

Front PanelAssembly For “Plastic” Door ..............................................................................................

17

Main Door “Steel”Assembly ................................................................................................................

18

Main Door SwitchAssembly Cold Rolled Steel Door ............................................................................

19

Cold Rolled Steel Door Front Panel ......................................................................................................

20

LintTrapAssembly ...............................................................................................................................

21

Drop Lint DoorAssembly Without Trim

 

For Non-Coin Models Mfd. as of July13, 1998 ..............................................................................

22

Drop Lint DoorAssemblyWith Trim

 

For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 .........................................

23

Tumbler/SupportAssemblies .................................................................................................................

24

Idler BearingAssembly .........................................................................................................................

25

TumblerBearingAssembly ..............................................................................................................

26, 27

Non-Reversing Totally Enclosed, Fan-Cooled Motor MountAssembly ............................................

28, 29

Reversing Totally Enclosed, Fan-Cooled Motor MountAssembly ....................................................

30, 31

Sensor BracketAssemblies .............................................................................................................

32, 33

Direct Spark Ignition BurnerAssembly ............................................................................................

34, 35

Electric OvenAssembly ..................................................................................................................

36, 37

Steam Coil/Air Operated Steam DamperAssembly .........................................................................

38, 39

SailSwitch/Hi-LimitAssembly ..............................................................................................................

40

Single-Phase (1Ø) Motor, Electric Relay PanelAssembly ......................................................................

41

3-Phase (3Ø) Motor, Electric Relay PanelAssembly .............................................................................

42

Microprocessor Reversing Rear Control BoxAssembly .........................................................................

43

Dual Timer Reversing Rear Control BoxAssembly ................................................................................

44

Outer Top/Back GuardAssemblies .......................................................................................................

45

Electric Oven Chart ..............................................................................................................................

46

Transformer Listing Gas/Steam Dryers ..................................................................................................

47

Transformer Usage Listing For Electric Dryers .......................................................................................

48

Microprocessor CoinAcceptors Listing ................................................................................................

49

Additional PartsAvailable .....................................................................................................................

50

Control Door Assembly Without Trim

For Non-Coin Models Mfd. as of July 13, 1998

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo Only (with double adhesive tape)

 

 

870011

1

Logo Double Tape Kit

2

882265*

1

Control Door

 

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10 x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

450302-5

Telephone: (508) 678-9000 / www.amdry.com

3

High Security Control Door Assembly

ForALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

 

 

Description

1

 

160015

1

 

 

High Security MK-100 Lock Assembly with Key (for coin models Only)

 

 

160104

1

 

 

MK-100 Key Only

 

 

160017

1

 

 

Special Dummy Lock Only (for non-coin models Only)

2

 

160032

1

 

 

Lock Cam Only

3

 

881053

1

 

 

ADC Logo with Tape Kit

 

 

112350

1

 

 

ADC Logo Only

 

 

870011

1

 

 

Double Sided Tape Kit

4*

800022

1

 

 

High Security Control Door Assembly Less Lock

 

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

 

800141

1

 

 

High Security Stainless Steel Control Door Assembly Less Lock

 

 

 

 

 

 

(includes illus. nos. 4 through 7)

5

 

180201

1

 

 

Top Trim with Lock Hole

6

 

117603

3

 

 

Suppressor Tape/Gasket (sold by the foot)

7

 

150201

5

 

 

#10-32 x 1/4” Phillips Round Head Machine Screw

8

 

150300

4

 

 

#10 x 1/2” Hex Washer TEK Screw

9

 

102603

1

 

 

Control Door Support Rod Catch

10

102601

1

 

 

Control Door Rod Retainer Clip

11

102502

1

 

 

Control Door Support Rod

*Specify color when ordering.

4

American Dryer Corporation

450302-5

Phase 5 Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

801213

1

Phase 5 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, 4 through 6 and 11)

 

801229

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, 4 through 6 and 11)

 

801259

1

Coin Control Panel Only

 

801258

1

Coin Control Panel with Battery Bracket

3

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

137213

1

Phase 5 Coin Controller Only

 

824998

1

Phase 5 Battery Clip

5

153010

2

#6 Star Washer

6

150005

2

#6-32 x 1/4” Phillips Round Head Machine Screw

7

---------

1

Microprocessor Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 49)

8

137056

1*

Optic Switch Only (Greenwald coin acceptors)

 

881143

1*

Optic Switch Only (Hanke coin acceptors)

9

137023

1*

Optic Switch Connector Only

10

137021

3*

Microprocessor Socket Only

 

880772

1

Single Coin Optical Switch Harness

 

824080

1

Dual Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

11

136048

1

1/8-Amp (Slo-Blo) Fuse

*For dual coin models, double the quantity.

IMPORTANT: Check label on computer chip to verify correct part number for controller.

450302-5

Telephone: (508) 678-9000 / www.amdry.com

5

Phase 5 Non-Coin Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112535

1

Non-Coin English Keyboard Label Assembly

 

112276

1

Non-Coin Stick-On Labels (English Only)...Not Illustrated

 

112275

1

3-Language Non-Coin Stick-On Labels...Not Illustrated

 

 

 

(Spanish, Italian, and Hebrew)

 

112277

1

3-Language Non-Coin Stick-On Labels...Not Illustrated

 

 

 

(English, Spanish, and Hebrew)

 

112278

1

5-Language Non-Coin Stick-On Labels...Not Illustrated

 

 

 

(Italian, Dutch, French, German, and Chinese)

2

801255

1

Phase 5 Microprocessor Control Panel Only

 

801256

1

Phase 5 Microprocessor Control Panel Only with Battery Bracket

 

801206

1

Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 7)

 

801207

1

Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 7)

3

137222

1

Phase 5 Non-Coin Non-Reversing Controller Only

 

137231

1

Phase 5 Non-Coin Reversing Controller Only

 

824998

1

Phase 5 Battery Clip

4

153010

2

#6 Star Washer

5

150005

2

#6-32 x 3/4” Phillips Round Head Machine Screw

6

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

7

136048

1

1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller.

6

American Dryer Corporation

450302-5

Phase 5 Coin and Non-Coin Microprocessor Control Box Assembly

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

141403

1

24 VAC Transformer

 

 

 

 

For ALL Gas and Steam Models, and Electric Models of 380/416/480 Volt

 

 

132070

1

24 VAC Transformer

 

 

 

 

(for electric models of 208 volt/240 volt)

2

150300

2

#10 x 1/2” Hex Washer TEK Screw

3

120715

1

30-Position Terminal Block

4

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

5

151000

2

#6-32 Pal Nut

6

136057

*

1/2-Amp (Slo-Blo) Fuse

7

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

8

136008

*

Fuse Block/Strip Only

9

122641

1

15-Pin Microprocessor Connector

10

122706

*

Socket

*As required.

450302-5

Telephone: (508) 678-9000 / www.amdry.com

7

Dual Timer “Tap Touch” Controls

For Models Mfd. as of November 3, 2000

Illus. No.

Part No.

Qty.

Description

1

124030

1

15 Minute Timer - 24 VAC

2

124025

1

60 Minute Timer - 24 VAC

3

824175

1

Red Pilot Light - 24 VAC

4

122301

1

“Tap Touch” Switch

5

131932

3

Relay SPST 24v

6

120730

1

30-Position Terminal Block

7

151000

6

#6-32 Pal Nut

8

882903

1

Dual Timer Panel Complete

 

 

 

(includes illus. nos. 1 through 15)

 

850392

-

Dual Timer Panel Only

9

153010

2

#6 Star Washer

10

152000

3

#6-32 Hex Nut

11

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

12

150110

4

#8-32 x 1/4” Phillips Round Head Machine Screw

13

112563

1

Dual Timer Panel Overlay

14

124104

1

Pure Touch Knob with Red Pointer

15

124105

1

Pure Touch Knob with Blue Pointer

8

American Dryer Corporation

450302-5

Dual Timer Control Panel Assembly

For Models Mfd. prior to November 3, 2000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

123005

1

Red Indicator Light - 24 VAC

 

2

122400

1

Rocker Heat Selector Switch

 

3

824015

1

Dual Timer Control Panel Assembly Complete - 24 VAC

 

 

 

 

 

(includes illus. nos. 1 through 21)

 

 

800051

1

Dual Timer Control Panel Only

 

4

131917

1

Push-to-Start Relay - 24 VAC

 

5

150207

2

#10-24 x 1/2” Round Head Machine Screw

 

6

154001

2

#10-24 Speed Nut

 

7

152000

2

#6-32 Hex Nut

 

8

153010

2

#6 Star Washer

 

9

120713

1

18-Position Terminal Block

 

10

150002

2

#6-32 x 1” Round Head Machine Screw

 

11

150110

4

#8-32 x 1/4” Phillips Machine Screw

 

12

150001

2

#6-32 x 1/2” Round Head Machine Screw

 

13

131931

1

Dual Timer Relay - 24 VAC

 

14

151000

2

#6-32 Pal Nut

 

15

112050

1

Dual Timer Label Only

 

16

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

 

17

124103

2

Arrow Timer - 24 VAC

 

18

124025

1

60 Minute Timer - 24 VAC

 

19

124030

1

15 Minute Timer - 24 VAC

 

20

122602

1

9-Pin Connector Only

 

21

122700

8

Pin Terminal Only

 

--

122801

1

Pin/Socket Extraction Tool

 

450302-5

Telephone: (508) 678-9000 / www.amdry.com

9

Dual Timer Control Box Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

122603

1

9-Pin Socket Connector

2

122701

9

Socket Terminal Only

 

122801

1

Pin/Socket Extraction Tool

3

315010

1

9-Pin Connector Bracket

4

150300

2

#10 x 1/2” Hex Washer TEK Screw

5

150300

2

#10 x 1/2” Hex Washer TEK Screw

6

141403

1

24 VAC Transformer

 

 

 

(for ALL gas and steam models, and electric models of 380/416/480 volt)

 

132070

1

24 VAC Transformer

 

 

 

(for electric models of 208 volt/240 volt)

7

136008

*

Fuse Block/Strip Only

8**

136057

*

1/2-Amp (Slo-Blo) Fuse

9

150301

*

#8 x 7/16” Phillips Pan Head TEK Screw

10

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

11

120715

1

30-Position Terminal Block

12

151000

2

#6-32 Pal Nut

*As required.

**Check fusing on dryer for verification.

10

American Dryer Corporation

450302-5

Non-Microprocessor Coin Meter Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

 

123005

1

Red Indicator Light - 24 VAC

 

2

 

122400

1

Rocker Heat Selector Switch

 

3

 

824020

1

Coin Meter Control Panel Assembly Complete - 24 VAC

 

 

 

 

 

(includes illus. nos. 1 through 6 and 8 through 12)

 

 

 

800054

1

Coin Meter Control Panel Only

 

4

 

131917

1

Push-to-Start Relay - 24 VAC

 

5

 

150207

2

#10-24 x 1/2” Round Head Machine Screw

 

6

 

154001

2

#10-24 Speed Nut

 

7*

 

125601

1

25¢ Coin Meter 24v (specify timing)

 

8

 

150303

2

#4 x 3/4” Pan Head “A” Screw

 

9

 

120712

1

12-Position Terminal Block

 

10

 

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

 

11

 

122602

1

9-Pin Connector Only

 

12

 

122700

9

Pin Terminal Only

 

--

 

122801

1

Pin/Socket Extraction Tool

 

*Consult factory for coin meters not listed.

450302-5

Telephone: (508) 678-9000 / www.amdry.com

11

Non-Microprocessor Coin Meter Control Box Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

122603

1

9-Pin Socket Connector

2

122701

9

Socket Terminal Only

 

122801

1

Pin/Socket Extraction Tool

3

315010

1

9-Pin Connector Bracket

4

150300

2

#10 x 1/2” Hex Washer TEK Screw

5

150300

2

#10 x 1/2” Hex Washer TEK Screw

6

141403

1

24 VAC Transformer

 

 

 

 

(for ALL gas and steam models, and electric models of 380/416/480 volt)

 

132070

1

24 VAC Transformer

 

 

 

 

(for electric models of 208/240 volt)

7

136008

*

Fuse Block/Strip Only

8**

136057

*

1/2-Amp (Slo-Blo) Fuse

9

150301

*

#8 x 7/16” Phillips Pan Head TEK Screw

10

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

11

120715

1

30-Position Terminal Block

12

151000

2

#6-32 Pal Nut

*As required.

**Check fusing on dryer for verification.

12

American Dryer Corporation

450302-5

American Dryer Corp ADS-50S, ADG-50DS, AD-50, ADE-50S User Manual

Coin Meter Replacement Parts

Illus. No. Part No. Qty. Description

1

125541

1

1/60 RPM 24v / 60 Hz Meter Motor

 

125540

1

1/30 RPM 24v / 50 Hz Meter Motor

2

125500

1

2-Point Cam

 

125501

1

3-Point Cam

 

125502

1

4-Point Cam

 

125503

1

5-Point Cam

 

125504

1

6-Point Cam

 

125506

1

8-Point Cam

 

125507

1

9-Point Cam

 

125508

1

10-Point Cam

 

125510

1

12-Point Cam

3

125515

1

Meter Switch “B” with Arm

4

125516

2

Meter Switch “A” or “C”

450302-5

Telephone: (508) 678-9000 / www.amdry.com

13

Coin Vault Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

802112

1

Microprocessor Coin Vault Assembly Complete

 

 

 

 

(includes illus. nos. 1 through 6)

 

 

802117

1

Microprocessor Coin Vault Only

 

 

802110

1

Non-Microprocessor Coin Vault Assembly Complete

 

 

 

 

(includes illus. nos. 1 through 6)

 

 

802115

1

Non-Microprocessor Coin Vault Only

2

160006

1

Cam For 1/4 Turn Lock Only

3

875061

1

1/4 Turn Lock with Key and Cam

 

 

160105*

1

1/4 Turn Mer-Pel Key Only

4

802020

1

1/4 Turn Coin Box Assembly

 

 

 

 

(includes illus. nos. 2 through 5)

 

 

802019

1

1/4 Turn Coin Box Only without Face Plate

 

 

125915

1

High Security (Greenwald) Coin Box Only with Key

5

802018

1

1/4 Turn Coin Box Face Plate Assembly

 

 

 

 

(includes illus. nos. 2 through 5)

6

152014

4

1/4-20 Free Spin Wash Nut

7

102502

1

Control Door Support Rod

8

102601

1

Control Door Rod Retainer Clip

9

102603

1

Control Door Rod Catch

*Specify key number when ordering.

14

American Dryer Corporation

450302-5

“Plastic” Main Door Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

881421

1

Gray Plastic Main Door Assembly Complete with Mechanical Fasteners

 

 

 

(includes illus. nos. 1 and 5 through 9)

2

800448

4

12-1/2” Stainless Steel Main Door Hinge Assembly

3

150410

4

#10-24 x 3/8” Phillips Pan Head Taptite Screw

4

152014

1

1/4-20 Free Spin Wash Nut

5

102349

1

Main Door Gasket

6

102212

1

20-7/16” Door Glass with Four (4) Holes

 

170730

1

Main Door Glass Adhesive (10.3 oz. cartridge)

7

150448

4

1/2” Stainless Steel Flat Head Allen Screw

8

170319

4

Door Glass (Nylon) Spacer

9

150431

1

Main Door Latch Screw

 

 

 

(#10 x 7/16” dome hex head)

450302-5

Telephone: (508) 678-9000 / www.amdry.com

15

Loading...
+ 37 hidden pages