American Dryer Corp AD-50 User Manual

1.4 Mb
Loading...

AD-30 / AD-50 Parts Manual 1987 thru 1991

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

050492

ADC Part No. 450096

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

 

AD-30 High Security Control Door Assembly .........................................................................................

4

AD-50 High Security Control Door Assembly .........................................................................................

5

Phase 3 OPL Microprocessor Control Panel Assembly .......................................................................

6, 7

Phase 3 OPL Microprocessor Control Box Assembly .........................................................................

8, 9

Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly .................................................

10

Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly ....................................................

11

Phase 4 OPL Reversing Microprocessor Control Panel Assembly ..........................................................

12

Phase 4 OPL Reversing Microprocessor Control Box Assembly ............................................................

13

Phase 4 Single Coin Microprocessor Control Panel Assembly ...............................................................

14

Phase 4 Single Coin Microprocessor Control Box Assembly .................................................................

15

Phase 4 Dual Coin Microprocessor Control Panel Assembly .................................................................

16

Phase 4 Dual Coin Microprocessor Control Box Assembly ...................................................................

17

Phase 4.1 Single Coin Microprocessor Control Panel Assembly ............................................................

18

Phase 4.1 Single Coin Microprocessor Control Box Assembly ..............................................................

19

Phase 4.1 Dual Coin Microprocessor Control Panel Assembly ..............................................................

20

Phase 4.1 Dual Coin Microprocessor Control Box Assembly ................................................................

21

Dual Timer Control Panel Assembly ................................................................................................

22, 23

Dual Timer Control Box Assembly ..................................................................................................

24, 25

Non-Microprocessor Coin Meter Control Panel Assembly ..............................................................

26, 27

Non-Microprocessor Coin Meter Control Box Assembly ................................................................

28, 29

AD-30/AD-50 Coin Vault Assembly .....................................................................................................

30

AD-30 Slide Meter Case Assembly ......................................................................................................

31

AD-30 Slide Meter Control Box Assembly

 

For Models Mfd. with Globar® Ignition ONLY ..........................................................................

32

AD-30 Slide Meter Control Box Assembly

 

For Models Mfd. with Direct Spark Ignition (DSI) ONLY ........................................................

33

AD-30/AD-50 Main Door Assembly

 

For Door Magnet Type Models ONLY ......................................................................................

34

AD-30 Front Panel Assembly

 

For Door Magnet Type Models ONLY ......................................................................................

35

AD-30/AD-50 Main Door Assembly

 

For Door Latch Type Models ONLY ..........................................................................................

36

AD-50 Front Panel Assembly

 

For Door Magnet Type Models ONLY ......................................................................................

37

AD-30 Front Panel Assembly

 

For Door Latch Type Models ONLY ..........................................................................................

38

AD-50 Front Panel Assembly

 

For Door Latch Type Models ONLY ..........................................................................................

39

Plunger Type Main Door Switch Assembly ............................................................................................

40

New Style (N.S.) Series Main Door Switch Assembly ...........................................................................

41

AD-30 Basket (Tumbler)/Support Assemblies

 

For Models Mfd. with Non-Tapered Ribs ONLY ......................................................................

42

AD-50 Basket (Tumbler)/Support Assemblies

 

For Models Mfd. with Non-Tapered Ribs ONLY ......................................................................

43

AD-50 Basket (Tumbler)/Support Assemblies

 

For Models Mfd. with Tapered Ribs ONLY ...............................................................................

44

AD-30 Drop Lint Door Assembly .........................................................................................................

45

AD-50 Drop Lint Door Assembly ...................................................................................................

46, 47

AD-30 Lint Trap Assembly ...................................................................................................................

48

AD-50 Lint Trap Assembly ...................................................................................................................

49

AD-30 Basket (Tumbler) Bearing Assembly ....................................................................................

50, 51

AD-50 Basket (Tumbler) Bearing Assembly ....................................................................................

52, 53

AD-30/AD-50 Idler Bearing Assembly ...........................................................................................

54, 55

AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Non-Tapered Ribs ONLY ................................................................

56, 57

AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Non-Tapered Ribs ONLY ................................................................

58, 59

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Non-Tapered Ribs ONLY ................................................................

60, 61

AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Tapered Ribs ONLY.........................................................................

62, 63

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Tapered Ribs ONLY .........................................................................

64, 65

Sensor Bracket Assemblies .............................................................................................................

66, 67

ADG-30 Standard Non-Hi/Lo Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY ....................................................................

68, 69

ADG-50 Standard Non-Hi/Lo Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY ....................................................................

70, 71

ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY ....................................................................

72, 73

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. with Direct Spark Ignition (DSI) ONLY ..................................................

74, 75

ADE-30/ADE-50 Electric Oven Assembly

 

For Models Mfd. as of November 12, 1990 .........................................................................

76, 77

ADE-30/ADE-50 Electric Oven Assembly

 

For Models Mfd. prior to November 12, 1990 .....................................................................

78, 79

ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies

 

For Globar® Models and Direct Spark Ignition (DSI) Models ONLY ......................................

80

ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve

 

For Globar® Ignition Models ONLY ..........................................................................................

81

ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve

 

For Globar® Ignition Models ONLY ...........................................................................................

82

Microprocessor Reversing Rear Control Box Assembly

 

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays ..................

83

Dual Timer Reversing Rear Control Box Assembly

 

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays ..................

84

Microprocessor Reversing Rear Control Box Assembly

 

For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 85

Dual Timer Reversing Rear Control Box Assembly

For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 86

3-Phase (3Ø) Motor, Electric Relay Panel Assembly

 

For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays ...............................

87

3-Phase (3Ø) Motor, Electric Relay Panel Assembly

 

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays ..................

88

Control/Heat Step Down Transformer

 

For Globar® Models and High Pressure Motorized Steam Valve Models ONLY ...................

89

ADS-30 Steam Coil Damper Assembly ..........................................................................................

90, 91

ADS-50 Steam Coil Damper Assembly ..........................................................................................

92, 93

ADS-30/ADS-50 Steam Coil/Valve Assembly

 

For Motorized Type and Solenoid Type Models ONLY ............................................................

94

AD-30/AD-50 Outer Top/Back Guard Assemblies ...............................................................................

95

ADG-30/ADG-50 Heat Reclaimer Assembly ........................................................................................

96

Relay Board Listing ..............................................................................................................................

97

Microprocessor Coin Acceptors Listing ................................................................................................

98

Coin Meter Replacement Parts .............................................................................................................

99

ADG-30/ADG-50 Globar® Burner Assembly Specifications ................................................................

100

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications ...................................

101

ADE-30/ADE-50 Electric Oven Component Application Charts

 

For Models Mfd. as of November 12, 1990 .............................................................................

102

ADE-30/ADE-50 Electric Oven Component Application Charts

 

For Models Mfd. prior to November 12, 1990 .........................................................................

103

Additional Parts Available ...................................................................................................................

104

4

AD-30 High Security Control Door Assembly

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100 Lock Assembly with Key

 

 

 

(for coin models Only)

 

160017

1

Special Dummy Lock ONLY

 

 

 

(for non-coin models Only)

 

160104

1

MK-100 Key ONLY

2

160016

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800023*

1

AD-30 High Security Control Door Assembly without Lock

 

 

 

(includes illus. nos. 4 through 7)

 

800140

1

AD-30 Stainless Steel High Security Control Door Assembly without Lock

 

 

 

(includes illus. nos. 4 through 7)

5

180200

1

AD-30 Top Gray Trim Strip with Lock Hole

6

102307

3

Trim Bumper Gasket (sold by the foot)

7

150201

5

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

9

102600

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 High Security Control Door Assembly

5

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100 Lock Assembly with Key

 

 

 

(for coin models Only)

 

160017

1

Special Dummy Lock ONLY

 

 

 

(for non-coin models Only)

 

160104

1

MK-100 Key ONLY

2

160032

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800022*

1

AD-50 High Security Control Door Assembly without Lock

 

 

 

(includes illus. nos. 4 through 7)

5

180201

1

AD-50 Top Gray Trim Strip with Lock Hole

6

102307

3

Trim Bumper Gasket (sold by the foot)

7

150201

5

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

9

102600

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

6

Phase 3 OPL Microprocessor Control Panel Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 3 OPL Microprocessor Control Panel Assembly

7

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-On Labels

 

 

 

(English Only) ... Not Illustrated

 

112275

1

OPL Stick-On Labels

 

 

 

(Spanish, Italian, and Hebrew) ... Not Illustrated

 

112277

1

3 Language OPL Stick-On Labels

 

 

 

(English, Spanish, and Hebrew) ... Not Illustrated

 

112278

1

5 Language OPL Stick-On Labels

 

 

 

(Italian, Dutch, French, German, and Chinese) ... Not Illustrated

2

800057

1

Microprocessor Controller (computer) Control Panel ONLY

 

800164

1

Microprocessor Controller (computer) Control Panel ONLY

 

 

 

with Battery Bracket

 

800161

1

Phase 3 OPL Non-Reversing Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 5)

 

800163

1

Phase 3 OPL Non-Reversing Control Panel Assembly Complete

 

 

 

with Battery Option

 

 

 

(includes illus. nos. 1 through 5)

 

865088*

1

Phase 3 OPL Reversing Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 5)

 

865089*

1

Phase 3 OPL Reversing Control Panel Assembly Complete

 

 

 

with Battery Option

 

 

 

(includes illus. nos. 1 through 5)

3

137092

1

Phase 3 OPL Non-Reversing Microprocessor Controller (computer) ONLY

 

137093

1

Phase 3 OPL Non-Reversing Microprocessor Controller (computer)

 

 

 

ONLY with Battery Clip

 

137094

1

Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY

 

137095

1

Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

4

152001

4

#8-32 Hex Nut

5

882541

1

Spring Turn Latch Assembly

*Used on dryer models with reversing option ONLY.

IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller (computer).

NOTE: OPL microprocessor controllers (computers) listed are suitable for ALL voltage applications.

Telephone: (508) 678-9000

Fax: (508) 678-9447

8

Phase 3 OPL Microprocessor Control Box Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 3 OPL Microprocessor Control Box Assembly

9

Illus. No.

Part No.

Qty.

Description

1

137021

*

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

2

137020

1

15-Pin Microprocessor Connector ONLY

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

**

Nylon Standoff

6

---------

1

Arc Suppressor (A.S.) Relay Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

7

131916

***

P.C.B. (electromechanical) Relay ONLY

 

 

 

(for 120 volt models Only)

 

131930

***

P.C.B. (electromechanical) Relay ONLY

 

 

 

(for 208/230 volt models Only)

8

140150

1

Diode Logic Board (for gas models Only)

9

136052

***

4-Amp Fuse ONLY

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131030

1

Steam Valve Relay

 

 

 

(for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay

 

 

 

(for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120709

1

8-Position Terminal Strip

14

151000

2

#6-32 Pal Nut

*Quantity required is 13 or 15 required.

**Quantity required is 4 or 8 required.

***Quantity required is 1 or 2 required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

10 Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-On Labels

 

 

 

(English Only) ... Not Illustrated

 

112275

1

OPL Stick-On Labels

 

 

 

(Spanish, Italian, and Hebrew) ... Not Illustrated

 

112277

1

3 Language OPL Stick-On Labels

 

 

 

(English, Spanish, and Hebrew) ... Not Illustrated

 

112278

1

5 Language OPL Stick-On Labels

 

 

 

(Italian, Dutch, French, German, and Chinese) ... Not Illustrated

2

800057

1

Microprocessor Controller (computer) Control Panel ONLY

 

800164

1

Microprocessor Controller (computer) Control Panel ONLY

 

 

 

with Battery Bracket

 

800171

1

Phase 4 OPL Non-Reversing Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 5)

 

865095

1

Phase 4 OPL Non-Reversing Control Panel Assembly Complete

 

 

 

with Battery Option

 

 

 

(includes illus. nos. 1 through 5)

3

137125

1

Phase 4 OPL Non-Reversing Microprocessor Controller (computer)

 

 

 

ONLY

 

137126

1

Phase 4 OPL Non-Reversing Microprocessor Controller (computer)

 

 

 

ONLY with Battery Clip

4

152001

4

#8-32 Hex Nut

5

882541

1

Spring Turn Latch Assembly

IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly

11

Illus. No.

Part No.

Qty.

Description

1

137021

12

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

2

137020

1

15-Pin Microprocessor Connector ONLY

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Solid State Relay (SSR) Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

 

131916

1

P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)

 

131930

1

P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)

7

136057

*

1/2-Amp (slo blo) Fuse ONLY

 

136052

*

4-Amp Fuse ONLY

8

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120715

1

30-Position Terminal Block

14

151000

2

#6-32 Pal Nut

15

136057

*

1/2-Amp (slo blo) Fuse ONLY

16

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

17

136008

*

Fuse Block/Strip ONLY

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

12

Phase 4 OPL Reversing Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-On Labels

 

 

 

(English Only) ... Not Illustrated

 

112275

1

OPL Stick-On Labels

 

 

 

(Spanish, Italian, and Hebrew) ... Not Illustrated

 

112277

1

3 Language OPL Stick-On Labels

 

 

 

(English, Spanish, and Hebrew) ... Not Illustrated

 

112278

1

5 Language OPL Stick-On Labels

 

 

 

(Italian, Dutch, French, German, and Chinese) ... Not Illustrated

2

800057

1

Microprocessor Controller (computer) Control Panel ONLY

 

800164

1

Microprocessor Controller (computer) Control Panel ONLY

 

 

 

with Battery Bracket

 

865092

1

Phase 4 OPL Reversing Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 5)

 

865096

1

Phase 4 OPL Reversing Control Panel Assembly Complete

 

 

 

with Battery Option

 

 

 

(includes illus. nos. 1 through 5)

3

137127

1

Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY

 

137128

1

Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

4

152001

4

#8-32 Hex Nut

5

882541

1

Spring Turn Latch Assembly

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4 OPL Reversing Microprocessor Control Box Assembly

13

Illus. No.

Part No.

Qty.

Description

1

137021

12

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

2

137020

1

15-Pin Microprocessor Connector ONLY

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Solid State Relay (SSR) Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

 

131930

1

P.C.B. (electromechanical) Relay ONLY (for 220 volt models Only)

7

136057

*

1/2-Amp (slo blo) Fuse ONLY

 

136052

*

4-Amp Fuse ONLY

8

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120715

1

30-Position Terminal Block

14

151000

2

#6-32 Pal Nut

15

136057

*

1/2-Amp (slo blo) Fuse ONLY

16

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

17

136008

*

Fuse Block/Strip ONLY

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

14

 

 

 

 

 

 

 

 

Phase 4 Single Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

800088

1

Phase 4 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800168

1

Phase 4 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800040

1

Coin Control Panel ONLY

 

800039

1

Coin Control Panel ONLY with Battery Bracket

3

150415

1

#10-16 x 1/2” Phillips Round Head Crimptite Screw

4

137110

1

Phase 4 Coin Microprocessor Controller (computer) ONLY

 

137115

1

Phase 4 Coin Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

5

152001

4

#8-32 Hex Nut

6

153012

4

#8 Star Washer

7

---------

1

Microprocessor Single Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 98)

8

137056

1

Optic Switch ONLY

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

865050

1

Single Coin Optical Switch Harness

--

122800

1

Microprocessor (female) Pin Extraction Tool

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4 Single Coin Microprocessor Control Box Assembly

15

Illus. No.

Part No.

Qty.

Description

1

137020

1

15-Pin Microprocessor Connector ONLY

2

137021

14

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Arc Suppressor (A.S.) Relay Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

7

131916

*

P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)

 

131930

*

P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)

8

136052

*

4-Amp Fuse ONLY

9

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

10

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

11

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

12

120709

1

8-Position Terminal Strip

13

151000

2

#6-32 Pal Nut

*Quantity required is 1 or 2.

Telephone: (508) 678-9000

Fax: (508) 678-9447

16

 

 

 

 

Phase 4 Dual Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

800088

1

Phase 4 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800168

1

Phase 4 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800040

1

Coin Control Panel ONLY

 

800039

1

Coin Control Panel ONLY with Battery Bracket

3

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

137110

1

Phase 4 Coin Microprocessor Controller (computer) ONLY

 

137115

1

Phase 4 Coin Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

5

152001

2

#8-32 Hex Nut

6

153012

2

#8 Star Washer

7

---------

1

Microprocessor Dual Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 98)

8

137056

1

Optic Switch ONLY

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

865050

1

Single Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4 Dual Coin Microprocessor Control Box Assembly

17

Illus. No.

Part No.

Qty.

Description

1

137020

1

15-Pin Microprocessor Connector ONLY

2

137021

15

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Arc Suppressor (A.S.) Relay Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

7

131916

*

P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)

 

131930

*

P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)

8

136052

*

4-Amp Fuse ONLY

9

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

10

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

11

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

12

120709

1

8-Position Terminal Strip

13

151000

2

#6-32 Pal Nut

*Quantity required is 1 or 2.

Telephone: (508) 678-9000

Fax: (508) 678-9447

18

 

 

 

 

 

 

 

 

Phase 4.1 Single Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

865098

1

Phase 4.1 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

865099

1

Phase 4.1 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800040

1

Coin Control Panel ONLY

 

800039

1

Coin Control Panel ONLY with Battery Bracket

3

150415

1

#10-16 x 1/2” Phillips Round Head Crimptite Screw

4

137130

1

Phase 4.1 Coin Microprocessor Controller (computer) ONLY

 

137131

1

Phase 4.1 Coin Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

5

152001

4

#8-32 Hex Nut

6

153012

4

#8 Star Washer

7

---------

1

Microprocessor Single Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 98)

8

137056

1

Optic Switch ONLY

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

---

865050

1

Single Coin Optical Switch Harness

---

122800

1

Microprocessor (female) Pin Extraction Tool

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4.1 Single Coin Microprocessor Control Box Assembly

19

Illus. No.

Part No.

Qty.

Description

1

137021

12

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

2

137020

1

15-Pin Microprocessor Connector ONLY

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Arc Suppressor (A.S.) Relay Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

 

131916

1

P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)

 

131930

1

P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)

7

136057

*

1/2-Amp (slo blo) Fuse ONLY

 

136052

*

4-Amp Fuse ONLY

8

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120715

1

30-Position Terminal Block

14

151000

2

#6-32 Pal Nut

15

136057

*

1/2-Amp (slo blo) Fuse ONLY

16

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

17

136008

*

Fuse Block/Strip ONLY

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

20

 

 

 

 

 

 

Phase 4.1 Dual Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

865098

1

Phase 4.1 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

865099

1

Phase 4.1 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

800040

1

Coin Control Panel ONLY

 

800039

1

Coin Control Panel ONLY with Battery Bracket

3

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

137130

1

Phase 4.1 Coin Microprocessor Controller (computer) ONLY

 

137131

1

Phase 4.1 Coin Microprocessor Controller (computer) ONLY

 

 

 

with Battery Clip

5

152001

2

#8-32 Hex Nut

6

153012

2

#8 Star Washer

7

---------

1

Microprocessor Dual Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 98)

8

137056

1

Optic Switch ONLY

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

865051

1

Dual Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer).

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 4.1 Dual Coin Microprocessor Control Box Assembly

21

Illus. No.

Part No.

Qty.

Description

1

137021

12

Microprocessor Socket ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool

2

137020

1

15-Pin Microprocessor Connector ONLY

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-Pin Strain Relief ONLY

5

137013

4

Nylon Standoff

6

---------

1

Arc Suppressor (A.S.) Relay Board

 

 

 

(refer to Relay Board Listing on page 97)

 

137061

1

Arc Suppressor (A.S.) Board ONLY without Relays

 

131916

1

P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)

 

131930

1

P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)

7

136057

*

1/2-Amp (slo blo) Fuse ONLY

 

136052

*

4-Amp Fuse ONLY

8

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120715

1

30-Position Terminal Block

14

151000

2

#6-32 Pal Nut

15

136057

*

1/2-Amp (slo blo) Fuse ONLY

16

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

17

136008

*

Fuse Block/Strip ONLY

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

22

Dual Timer Control Panel Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Dual Timer Control Panel Assembly

23

Illus. No.

Part No.

Qty.

Description

1

123000

1

Red Indicator Light (for 120 volt models Only)

 

123001

1

Red Indicator Light (for 230 volt models Only)

2

122400

1

Rocker Heat Selector Switch

3

865550

1

Dual Timer Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 21)

 

 

 

For 120 Volt Models ONLY

 

865551

1

Dual Timer Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 21)

 

 

 

For 230 Volt Models ONLY

 

800051

1

Dual Timer Control Panel ONLY

4

131812

1

Push To Start Relay (for 120 volt models Only)

 

131813

1

Push To Start Relay (for 230 volt models Only)

5

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

6

154001

2

#10-24 Speed Nut

7

152013

2

#6-32 Hex Nut

8

153010

2

#6 Star Washer

9

120713

1

18-Position Terminal Block

 

 

 

(for models mfd. as of May 3, 1989)

 

120708

1

3-Position Terminal Strip

 

 

 

(for models mfd. prior to May 3, 1989)

10

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

11

150110

4

#8-32 x 1/4” Phillips Round Head Machine Screw

12

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

13

131030

1

Dual Timer Relay (for 120 volt models Only)

 

131031

1

Dual Timer Relay (for 230 volt models Only)

14

151000

2

#6-32 Pal Nut

15

112050

1

Dual Timer Label ONLY

16

882541

1

Spring Turn Latch Assembly

17

124103

2

Arrow Timer Knob

18

124020

1

60 Minute Timer (for 120 volt models Only)

 

124021

1

60 Minute Timer (for 230 volt models Only)

19

124022

1

15 Minute Timer (for 120 volt models Only)

 

124023

1

15 Minute Timer (for 230 volt models Only)

20

122602

1

9-Pin Connector ONLY

21

122700

8

Pin Terminal ONLY

---

122801

1

Pin/Socket Extraction Tool

Telephone: (508) 678-9000

Fax: (508) 678-9447

24

 

Dual Timer Control Box Assembly

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Dual Timer Control Box Assembly

25

Illus. No.

Part No.

Qty.

Description

1

122603

1

9-Pin Socket Connector ONLY

2

122701

9

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

3

315010

1

9-Pin Connector Bracket

4

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

5

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

6

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

7

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

8

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 230 Volt Models ONLY

9

131814

1

Motor Control Relay (for 120 volt controls Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

136008

*

Fuse Block/Strip ONLY

 

875250

*

In-Line Fuse Holder Assembly ONLY

12*

136057

**

1/2-Amp (slo blo) Fuse ONLY

 

136052

**

4-Amp Fuse ONLY

 

136054

**

15-Amp (slo blo) Fuse

 

136056

**

20-Amp (slo blo) Fuse

13

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

14

136002

2

Panel Mount Fuse Holder Assembly

15*

136052

**

4-Amp Fuse ONLY

 

136054

**

15-Amp (slo blo) Fuse

 

136056

**

20-Amp (slo blo) Fuse

16

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

17

120715

1

30-Position Terminal Block

 

120709

1

8-Position Terminal Strip

18

151000

2

#6-32 Pal Nut

*As required.

**Check fuse rating for verification.

Telephone: (508) 678-9000

Fax: (508) 678-9447

26

Non-Microprocessor Coin Meter Control Panel Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Panel Assembly

27

Illus. No.

Part No.

Qty.

Description

1

123000

1

Red Indicator Light (for 120 volt models Only)

 

123001

1

Red Indicator Light (for 230 volt models Only)

2

122400

1

Rocker Heat Selector Switch

3

800070

1

Coin Meter Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 6 and 8 through 12)

 

 

 

For 120 Volt Models ONLY

 

800071

1

Coin Meter Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 6 and 8 through 12)

 

 

 

For 230 Volt Models ONLY

 

800054

1

Coin Meter Control Panel (for 12-position terminal block Only)

 

800052

1

Coin Meter Control Panel (for 2-position terminal strip Only)

4

131812

1

Push To Start Relay (for 120 volt models Only)

 

131813

1

Push To Start Relay (for 230 volt models Only)

5

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

6

154001

2

#10-24 Speed Nut

7*

125000

1

25¢ Coin Meter (specify timing) For 120 Volt Models ONLY

 

125003

1

25¢ Coin Meter (specify timing) For 230 Volt Models ONLY

8

150303

2

#4 x 3/4” Phillips Pan Head “A” Machine Screw

9

120712

1

12-Position Terminal Block

 

 

 

(for models mfd. as of May 15, 1989)

 

120707

1

2-Position Terminal Strip

 

 

 

(for models mfd. prior to May 15, 1989)

10

882541

1

Spring Turn Latch Assembly

11

122602

1

9-Pin Connector ONLY

12

122700

9

Pin Terminal ONLY

---

122801

1

Pin/Socket Extraction Tool

*Consult factory for coin meters not listed.

NOTE: For Coin Meter Replacement Parts refer to page 99.

Telephone: (508) 678-9000

Fax: (508) 678-9447

28

 

Non-Microprocessor Coin Meter Control Box Assembly

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Box Assembly

29

Illus. No.

Part No.

Qty.

Description

1

122603

1

9-Pin Socket Connector ONLY

2

122701

9

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

3

315010

1

9-Pin Connector Bracket

4

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

5

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

6

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

7

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

8

131030

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 120 Volt Models ONLY

 

131031

1

Steam Valve Relay (for high pressure steam models Only)

 

 

 

For 208/230 Volt Models ONLY

9

131814

1

Motor Control Relay (for 120 volt controls Only)

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

136008

*

Fuse Block/Strip ONLY

 

875250

*

In-Line Fuse Holder Assembly ONLY

12*

136057

**

1/2-Amp (slo blo) Fuse ONLY

 

136052

**

4-Amp Fuse ONLY

 

136054

**

15-Amp (slo blo) Fuse

 

136056

**

20-Amp (slo blo) Fuse

13

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

14

136002

2

Panel Mount Fuse Holder Assembly

15*

136052

**

4-Amp Fuse ONLY

 

136054

**

15-Amp (slo blo) Fuse

 

136056

**

20-Amp (slo blo) Fuse

16

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

17

120715

1

30-Position Terminal Block

 

120709

1

8-Position Terminal Strip

18

151000

2

#6-32 Pal Nut

*As required.

**Check fuse rating for verification.

Telephone: (508) 678-9000

Fax: (508) 678-9447

30

AD-30/AD-50 Coin Vault Assembly

Illus. No.

Part No.

Qty.

Description

1

802112

1

Microprocessor Coin Vault Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

 

802117

1

Microprocessor Coin Vault ONLY

 

802110

1

Non-Microprocessor Coin Vault Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

 

802115

1

Non-Microprocessor Coin Vault ONLY

2

160028

1

Cam for 1/4 Turn Lock ONLY

3

875061

1

1/4 Turn Lock with Key and Cam

 

160105*

1

1/4 Turn Mer-Pel Key ONLY

4

802020

1

1/4 Turn Coin Box Assembly

 

 

 

(includes illus. nos. 2 through 5)

 

802019

1

1/4 Turn Coin Box ONLY without Face Plate

 

125915

1

High Security (Greenwald) Coin Box ONLY with Key

5

802018

1

1/4 Turn Coin Box Face Plate ONLY

6

152014

4

1/4-20 Free Spin Wash Nut

7

102502

1

Control Door Support Rod

8

102601

1

Control Door Rod Retainer Clip

9

102600

1

Control Door Rod Support Catch

*Specify key number when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Slide Meter Case Assembly

31

 

 

 

Illus. No.

Part No.

Qty.

Description

1*

160199

1

Key ONLY for Slide Meter Lock

2

160099

1

Lock, Key, Cam, and Hardware

3

125908

1

Slide Meter Accumulator - 120 Volt

4

152014

4

1/4-20 Free Spin Wash Nut

5

125900

1

Slide Meter Case ONLY with Door Less Lock

6

154203

6

1/4” Drive Rivet

7

801700

1

Slide Meter Extension ONLY with Mirror

 

 

 

(includes illus. nos. 7 and 8)

8

315404

1

Stainless Steel Mirror ONLY

9

---------

1

Typical Slide Meter Coin Chute (not available from ADC)

10

---------

1

Typical Slide Meter Coin Box (not available from ADC)

11

801701

1

Slide Meter Case Mounting Plate

12

102502

1

Control Door Support Rod

13

102601

1

Control Door Rod Retainer Clip

14

102600

1

Control Door Rod Support Catch

15

122400

1

Rocker Heat Selector Switch

16

123005

1

Red Indicator Light (for 120 volt models Only)

17

131812

1

Push To Start Relay (for 120 volt models Only)

*Specify key number when ordering.

IMPORTANT: Parts listed are for 120 volt controls ONLY...for other voltages contact factory.

Telephone: (508) 678-9000

Fax: (508) 678-9447

32

AD-30 Slide Meter Control Box Assembly

 

For Models Mfd. with Globar® Ignition ONLY

Illus. No.

Part No.

Qty.

Description

1

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

2

311913

1

Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)

 

311921

1

Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)

3

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

132002

1

200 Watt Transformer (terminals are not included)

5

151000

2

#6-32 Pal Nut

6

120709

1

8-Position Terminal Strip

7

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

8

136052

1

4-Amp Fuse ONLY

9

875250

1

In-Line Fuse Holder Assembly ONLY

10

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

11

131814

1

Motor Control Relay (for 120 volt controls Only)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Slide Meter Control Box Assembly

33

For Models Mfd. with Direct Spark Ignition (DSI) ONLY

 

Illus. No.

Part No.

Qty.

Description

1

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

2

311913

1

Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)

 

311921

1

Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)

3

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

4

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer

 

 

 

(for gas models with Direct Spark Ignition [DSI] Only)

5

151000

2

#6-32 Pal Nut

6

120715

1

30-Position Terminal Block

7

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

8

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

9

131814

1

Motor Control Relay (for 120 volt contols Only)

10

136008

*

Fuse Block/Strip ONLY

 

875250

*

In-Line Fuse Holder Assembly ONLY

11*

136057

**

1/2-Amp (slo blo) Fuse ONLY

 

136054

**

15-Amp Fuse (for 120 volt models Only)

 

136056

**

20-Amp (slo blo) Fuse (for 208/230 volt models Only)

12*

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

*As required.

**Check fuse rating for verification.

Telephone: (508) 678-9000

Fax: (508) 678-9447

34

AD-30/AD-50 Main Door Assembly

 

For Door Magnet Type Models ONLY

Illus. No.

Part No.

Qty.

Description

1

800136

1

AD-30/AD-50 Main Door Assembly Complete

 

 

 

(includes illus. nos. 1 through 12)

 

800133

1

AD-30/AD-50 Main Door Assembly Less Accessories

 

 

 

(includes illus. nos. 1 through 3)

 

800134

1

AD-30/AD-50 Main Door with Glass and Gasket ONLY

 

 

 

(includes illus. nos. 1, 2, 3, 5, and 6)

2

103050

1

12-1/2” Stainless Steel Main Door Hinge

3

150410

4

#10-24 x 3/8” Phillips Pan Head Taptite Screw

4

152014

4

1/4-20 Free Spin Wash Nut

5

102350

1

Main Door Gasket

6

102210

1

20-7/16” Door Glass

7

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

8

102105

2

Magnet Holder ONLY

9

152013

2

#6-32 Hex Nut

10

306802

6

Magnet Keeper

11

102102

4

0.215 Door Magnet

12

150410

4

#10-24 x 3/8” Phillips Pan Head Taptite Screw

13

800131

2

Cast Aluminum Magnet Holder Assembly Complete

 

 

 

(includes illus. nos. 7 through 11)

---

170730

1

Main Door Glass Adhesive (10.3 oz. cartridge)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Front Panel Assembly

35

For Door Magnet Type Models ONLY

 

Illus. No.

Part No.

Qty.

Description

1

800369*

1

AD-30 Right Hand Front Panel (magnet type) Assembly Complete

 

 

 

(includes illus. nos. 1 through 4)

 

800366*

1

AD-30 Right Hand Insulated Front Panel (magnet type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 4)

 

800383

1

AD-30 Stainless Steel Right Hand Front Panel (magnet type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 4)

2

170340

2

3-1/2” Stainless Steel Striker Pad

3

154200

4

5/32” Pop Rivet

4

121405

1

Rubber Grommet

5

150309

8

#10-16 x 1/2” Hex Head TEK Crimptite Screw

6

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

7

150201

2

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

---------

1

Main Door Switch

(refer to Plunger Type Main Door Switch Assembly on page 40)

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

36

AD-30/AD-50 Main Door Assembly

 

For Door Latch Type Models ONLY

Illus. No.

Part No.

Qty.

Description

1

881421

1

Gray Plastic Main Door Assembly Complete with Mechanical Fasteners

 

 

 

(includes illus. nos. 1 and 5 through 9)

2

800448

1

12-1/2” Stainless Steel Main Door Hinge Assembly

3

150410

4

#10-24 x 3/8” Phillips Pan Head Taptite Screw

4

152014

4

1/4-20 Free Spin Wash Nut

5

102349

1

Main Door Gasket

6

102212

1

20-7/16” Door Glass with Four (4) Holes

 

170730

1

Main Door Glass Adhesive (10.3 oz. cartridge)

7

150448

4

Door Glass (nylon) Spacer

8

170319

4

1/2” Stainless Steel Flat Head Allen Screw

9

150431

1

Main Door Latch Screw

 

 

 

(#10 x 7/16” dome hex head screw)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Front Panel Assembly

37

For Door Magnet Type Models ONLY

 

Illus. No.

Part No.

Qty.

Description

1

800368*

1

AD-50 Right Hand Front Panel (magnet type) Assembly Complete

 

 

 

(includes illus. nos. 1 through 4)

 

800371*

1

AD-50 Right Hand Insulated Front Panel (magnet type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 4)

 

800388

1

AD-50 Stainless Steel Right Hand Front Panel (magnet type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 4)

2

170340

2

3-1/2” Stainless Steel Striker Pad

3

154200

4

5/32” Pop Rivet

4

121405

1

Rubber Grommet

5

150309

8

#10-16 x 1/2” Hex Head TEK Crimptite Screw

6

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

7

150201

2

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

---------

1

Main Door Switch

 

 

 

(refer to Plunger Type Main Door Switch Assembly on page 40)

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

38

AD-30 Front Panel Assembly

 

For Door Latch Type Models ONLY

Illus. No.

Part No.

Qty.

Description

1

875300*

1

AD-30 Right Hand Insulated Front Panel (latch type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1, 2, 3, and 6)

 

875311

1

AD-30 Stainless Steel Right Hand Insulated Front Panel (latch type)

 

 

 

Assembly Complete

 

 

 

(includes illus. nos. 1, 2, 3, and 6)

2

154215

2

5/32” Pop Rivet

3

170330

1

Friction Door Catch

4

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

5

150309

8

#10-16 x 1/2” Hex Head TEK Crimptite Screw

6

121405

1

Rubber Grommet

7

150201

2

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

---------

1

New Style (N.S.) Series Main Door Switch

 

 

 

(for microprocessor models mfd. as of November 21, 1990 and

 

 

 

non-microprocessor models mfd. as of November 15, 1990)

Refer to New Style (N.S.) Series Main Door Switch Assembly on page 41

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Front Panel Assembly

39

For Door Latch Type Models ONLY

 

Illus. No.

Part No.

Qty.

Description

1

875301*

1

AD-50 Right Hand Insulated Front Panel (latch type) Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1, 2, 3, and 6)

 

875312

1

AD-50 Stainless Steel Right Hand Insulated Front Panel (latch type)

 

 

 

Assembly Complete

 

 

 

(includes illus. nos. 1, 2, 3, and 6)

2

154215

2

5/32” Pop Rivet

3

170330

1

Friction Door Catch

4

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

5

150309

8

#10-16 x 1/2” Hex Head TEK Crimptite Screw

6

121405

1

Rubber Grommet

7

150201

2

#10-32 x 1/4” Phillips Pan Head TEK Screw

8

---------

1

New Style (N.S.) Series Main Door Switch

 

 

 

(for microprocessor models mfd. as of November 21, 1990 and

 

 

 

non-microprocessor models mfd. as of November 15, 1990)

Refer to New Style (N.S.) Series Main Door Switch Assembly on page 41

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

40

Plunger Type Main Door Switch Assembly

Illus. No.

Part No.

Qty.

Description

1

137003

1

Plunger Type Main Door Switch ONLY

 

 

 

(includes illus. nos. 1, 2, and 4)

2

401551

*

Door Switch Spacer Washer

3

870010

1

Plunger Type Main Door Switch Assembly Complete

 

 

 

(includes illus. nos. 1 through 4)

 

 

 

For Microprocessor Models Mfd. prior to November 21, 1990 and

 

 

 

Non-Microprocessor Models Mfd. prior to November 15, 1990

 

313209

1

Main Door Switch Housing ONLY

4

152003

1

3/8-32 x 1/2” Door Switch Nut

*As required.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

New Style (N.S.) Series Main Door Switch Assembly

41

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

312215

1

Door Switch Actuator Arm

2

800445*

1

New Style (N.S.) Series Microprocessor Main Door Switch Housing

 

 

 

Assembly Complete

 

 

 

(includes illus. nos. 1 through 7)

 

 

 

For Models Mfd. as of November 21, 1990

 

880446*

1

New Style (N.S.) Series Non-Microprocessor Main Door Switch

 

 

 

Housing Assembly Complete

 

 

 

(includes illus. nos. 1 through 7)

 

 

 

For Models Mfd. as of November 15, 1990

 

313217

1

Main Door Switch Housing ONLY

3

150025

2

#4-40 x 1” Phillips Pan Head Machine Screw

4

153045

2

#4 Lock Washer

5*

137004

**

New Style (N.S.) Series Main Door Switch ONLY

6

153045

2

#4 Lock Washer

7

152016

2

#4-40 Hex Nut

*Microprocessor controller (computer) models require two (2) New Style (N.S.) series door switches. Non-microprocessor controller (non-computer) models require one (1) New Style (N.S.) series door switch.

**Quantity is 1 or 2.

Telephone: (508) 678-9000

Fax: (508) 678-9447

42

AD-30 Basket (Tumbler)/Support Assemblies

 

For Models Mfd. with Non-Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1*

800703**

1

AD-30 Basket (tumbler) ONLY without Felt Collar

 

800803**

1

AD-30 Basket (tumbler) and Support Assembly Complete

 

 

 

(includes illus. nos. 1 through 10)

2

150309

40

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

301304

4

AD-30 Basket (tumbler) Rib ONLY

4

150518

1

5/16-18 x 3/8” Socket Button Head Screw

5

100902

4

5/16-18 x 31” Tie Rod

6

153001

4

5/16” Flat Washer

7

800603

1

AD-30 Basket (tumbler) Support ONLY

8

152004

4

5/16-18 Hex Nut

9

153002

4

5/16” Lock Washer

10

153001

4

5/16” Flat Washer

11

116002

1

Felt Collar ONLY

---

401010

1

#847 Adhesive For Felt Collar (5.0 oz. tube)

*For stainless steel basket (tumbler), contact factory.

**Felt collar is not included and must be ordered separately.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Basket (Tumbler)/Support Assemblies

43

For Models Mfd. with Non-Tapered Ribs ONLY

 

Illus. No.

Part No.

Qty.

Description

1*

800705**

1

AD-50 Basket (tumbler) ONLY without Felt Collar

 

800820**

1

AD-50 Non-Reversing Basket (tumbler) and Support Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 10)

 

800817**

1

AD-50 Reversing Basket (tumbler) and Support Assembly Complete

 

 

 

(includes illus. nos. 1 through 10)

2

150309

40

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

301302

2

AD-50 Basket (tumbler) Rib ONLY (low rib)

 

301310

2

AD-50 Basket (tumbler) Baffle Rib ONLY (high rib)

4

150518

1

5/16-18 x 3/8” Socket Button Head Screw

5

100902

4

5/16-18 x 31” Tie Rod

6

153001

4

5/16” Flat Washer

7

800616

1

AD-50 Non-Reversing Basket (tumbler) Support ONLY

 

800614

1

AD-50 Reversing Basket (tumbler) Support ONLY

8

152004

4

5/16-18 Hex Nut

9

153002

4

5/16” Lock Washer

10

153001

4

5/16” Flat Washer

11

116002

1

Felt Collar ONLY

---

401010

1

#847 Adhesive For Felt Collar (5.0 oz. tube)

*For stainless steel basket (tumbler), contact factory.

**Felt collar is not included and must be ordered separately.

Telephone: (508) 678-9000

Fax: (508) 678-9447

44

AD-50 Basket (Tumbler)/Support Assemblies

 

For Models Mfd. with Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1*

800838**

1

AD-50 Basket (tumbler) ONLY with Tapered Ribs without Felt Collar

 

800837**

1

AD-50 Non-Reversing Basket (tumbler) and Support Assembly

 

 

 

Complete with Tapered Ribs

 

 

 

(includes illus. nos. 1 through 10)

 

800839**

1

AD-50 Reversing Basket (tumbler) and Support Assembly

 

 

 

Complete with Tapered Ribs

 

 

 

(includes illus. nos. 1 through 10)

2

150309

40

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

301302

2

AD-50 Basket (tumbler) Rib ONLY (low rib)

 

301311

2

AD-50 Basket (tumbler) Baffle Rib ONLY (high rib)

4

150518

1

5/16-18 x 3/8” Socket Button Head Screw

5

100902

4

5/16-18 x 31” Tie Rod

6

153001

4

5/16” Flat Washer

7

800616

1

AD-50 Non-Reversing Basket (tumbler) Support ONLY

 

800614

1

AD-50 Reversing Basket (tumbler) Support ONLY

8

152004

4

5/16-18 Hex Nut

9

153002

4

5/16” Lock Washer

10

153001

4

5/16” Flat Washer

11

116002

1

Felt Collar ONLY

---

401010

1

#847 Adhesive For Felt Collar (5.0 oz. tube)

*For stainless steel basket (tumbler), contact factory.

**Felt collar is not included and must be ordered separately.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Drop Lint Door Assembly

45

Illus. No.

Part No.

Qty.

Description

1

160001

1

AD-100 Lock Assembly with Key

 

160103

1

AD-100 Key ONLY

 

800150

1

Knob Latch Kit Assembly (for non-coin models Only)

 

160200

1

Knob Latch ONLY with Two (2) Screws (for non-coin models Only)

 

160003

1

Dummy Lock ONLY (for non-coin models Only)

 

160104

1

MK-100 Key ONLY

2

160008

1

Lock Cam For AD-100 Lock

 

160009

1

Knob Latch Adjustable Cam (for non-coin models Only)

 

150425

1

#12-24 x 3/8” Phillips Round Head Machine Screw

 

 

 

(for knob latch adjustable cam)

3

157000

1

Drop Lint Door Spring

4

800216*

1

AD-30 Drop Lint Door Assembly

 

 

 

(includes illus. nos. 4 through 8)

 

800233*

1

AD-30 Insulated Drop Lint Door Assembly

 

 

 

(includes illus. nos. 4 through 8)

 

800240

1

AD-30 Stainless Steel Drop Lint Door Assembly

5

150201

10

#10-32 x 1/4” Phillips Pan Head TEK Screw

6

117600

7

Noise Suppressor Tape (sold by the foot)

7

117603

3

Suppressor Tape/Gasket (sold by the foot)

8

180210

2

AD-30 Trim/Kick Plate (31-1/8” length)

9

150419

2

#6 x 1/2” Tamperproof TEK Screw

 

150418

1

Tamperproof Screw Hand Driver

10

108120

1

Chain For Drop Lint Door

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

46

AD-50 Drop Lint Door Assembly

 

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Drop Lint Door Assembly

47

Illus. No.

Part No.

Qty.

Description

1

160001

1

AD-100 Lock Assembly with Key

 

160103

1

AD-100 Key ONLY

 

800150

1

Knob Latch Kit Assembly (for non-coin models Only)

 

160200

1

Knob Latch ONLY with Two (2) Screws (for non-coin models Only)

 

160003

1

Dummy Lock ONLY (for non-coin models Only)

 

160104

1

MK-100 Key ONLY

2

160008

1

Lock Cam For AD-100 Lock

 

160009

1

Knob Latch Adjustable Cam (for non-coin models Only)

 

150425

1

#12-24 x 3/8” Phillips Round Head Machine Screw

 

 

 

(for knob latch adjustable cam)

3

157000

1

Drop Lint Door Spring

4

800219*

1

AD-50 Drop Lint Door Assembly

 

 

 

(includes illus. nos. 4 through 8)

 

800232*

1

AD-50 Insulated Drop Lint Door Assembly

 

 

 

(includes illus. nos. 4 through 8)

 

800243

1

AD-50 Stainless Steel Drop Lint Door Assembly

5

150201

10

#10-32 x 1/4” Phillips Pan Head TEK Screw

6

117600

7

Noise Suppressor Tape (sold by the foot)

7

117603

3

Suppressor Tape/Gasket (sold by the foot)

8

180210

2

AD-30 Trim/Kick Plate (31-1/8” length)

9

150419

2

#6 x 1/2” Tamperproof TEK Screw

 

150418

1

Tamperproof Screw Hand Driver

10

108120

1

Chain For Drop Lint Door

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

48

AD-30 Lint Trap Assembly

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

800408

1

AD-30 Lint Trap Assembly Complete

 

 

 

(includes illus. nos. 1, 3, 4, and 5)

 

800409

1

AD-30 Lint Trap ONLY

2

154200

7

5/32” Pop Rivet

3

304102

1

AD-30 Lint Screen Holder ONLY

4

150300

3

#10-16 x 1/2” Hex Washer TEK Screw

5

800503

1

AD-30 Lint Screen ONLY

6

150419

2

#6 x 1/2” Tamperproof TEK Screw

7

108120

1

Chain For Drop Lint Door (10-1/2” length)

-

150418

1

Tamperproof Screw Hand Driver

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Lint Trap Assembly

49

 

 

 

Illus. No.

Part No.

Qty.

Description

1

800402

1

AD-50 Lint Trap Assembly Complete

 

 

 

(includes illus. nos. 1, 3, 4, and 5)

 

800404

1

AD-50 Non-Reversing Lint Trap ONLY

 

800407

1

AD-50 Reversing Lint Trap Assembly Complete

 

 

 

(includes illus. nos. 1, 3, 4, and 5)

 

800406

1

AD-50 Reversing Lint Trap ONLY

2

154200

7

5/32” Pop Rivet

3

304101

1

AD-50 Lint Screen Holder ONLY

4

150300

3

#10-16 x 1/2” Hex Washer TEK Screw

5

800501

1

AD-50 Lint Screen ONLY

6

150419

2

#6 x 1/2” Tamperproof TEK Screw

7

108120

1

Chain For Drop Lint Door

-

150418

1

Tamperproof Screw Hand Driver

Telephone: (508) 678-9000

Fax: (508) 678-9447

50

AD-30 Basket (Tumbler) Bearing Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Basket (Tumbler) Bearing Assembly

51

Illus. No.

Part No.

Qty.

Description

1

880203

1

1-3/8” Flange Bearing with Nylock Setscrew

2

153005

4

3/8” Lock Washer

3

152005

4

3/8-16 Hex Nut

4

150508

2

3/8-16 x 3/4” Hex Head Machine Bolt

5

153005

2

3/8” Lock Washer

6

152005

2

3/8-16 Hex Nut

7

150600

2

3/8-16 x 1-1/2” Hex Head Machine Bolt

8

153004

*

3/8” Flat Washer

9

153005

2

3/8” Lock Washer

10

152005

2

3/8-16 Hex Nut

11

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

12

153002

4

5/16” Lock Washer

13

153001

4

5/16” Flat Washer

14

150621

2

5/16-18 x 1-1/2” Hex Head Machine Bolt

15

152004

2

5/16-18 Hex Nut

16

801101

1

1-3/8” Bearing Box Assembly Complete

 

 

 

(includes illus. nos. 4 through 20)

 

801103

1

1-3/8” Bearing Box and Support ONLY

 

 

 

(includes illus. nos. 4, 5, 6, 16, and 17)

 

801105

1

1-3/8” Bearing Box ONLY

17

801104

1

Pillow Block Bearing Support ONLY

18

880779

1

1-3/8” Pillow Block Bearing Assembly with Magnet

 

 

 

(for models mfd. with rotational sensor)

 

880202

1

1-3/8” Pillow Block Bearing ONLY

19

152004

2

5/16-18 Hex Nut

20

150610

2

5/16-18 x 1-1/2” Allen Setscrew

21

101100

1

18” Pulley

22

154301

2

5/16-18 x 1” Allen Setscrew

23

100713

1

1/4” x 1/4” x 7/8” Key

24

100108

1

5L-680 V-Belt (basket [tumbler] to idler)

25

824807

1

Rotational Sensor Assembly

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

52

AD-50 Basket (Tumbler) Bearing Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Basket (Tumbler) Bearing Assembly

53

Illus. No.

Part No.

Qty.

Description

1

880220

1

1-3/4” Flange Bearing with Nylock Setscrew

2

153025

4

9/16” Lock Washer

3

152050

4

9/16-12 Hex Nut

4

150508

2

3/8-16 x 3/4” Hex Head Machine Bolt

5

153005

2

3/8” Lock Washer

6

152005

2

3/8-16 Hex Nut

7

150600

2

3/8-16 x 1-1/2” Hex Head Machine Bolt

8

153004

*

3/8” Flat Washer

9

153005

2

3/8” Lock Washer

10

152005

2

3/8-16 Hex Nut

11

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

12

153002

4

5/16” Lock Washer

13

153001

4

5/16” Flat Washer

14

150621

2

5/16-18 x 1-1/2” Hex Head Machine Bolt

15

152004

2

5/16-18 Hex Nut

16

801101

1

1-3/8” Bearing Box Assembly Complete

 

 

 

(includes illus. nos. 4 through 20)

 

801103

1

1-3/8” Bearing Box and Support ONLY

 

 

 

(includes illus. nos. 4, 5, 6, 16, and 17)

 

801105

1

1-3/8” Bearing Box ONLY

17

801104

1

Pillow Block Bearing Support ONLY

18

880779

1

1-3/8” Pillow Block Bearing Assembly with Magnet

 

 

 

(for models mfd. with rotational sensor)

 

880202

1

1-3/8” Pillow Block Bearing ONLY

19

152004

2

5/16-18 Hex Nut

20

150610

2

5/16-18 x 1-1/2” Allen Setscrew

21

101100

1

18” Pulley (for non-reversing models Only)

 

101118

1

18-3/4” Pulley (for reversing models Only)

 

101119

1

1-3/8” Taper Lock Hub (for reversing models Only)

22

154301

2

5/16-18 x 1” Allen Setscrew

23

100713

1

1/4” x 1/4” x 7/8” Key

24

100108

1

5L-680 V-Belt (basket [tumbler] to idler)

25

824807

1

Rotational Sensor Assembly

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

54

AD-30/AD-50 Idler Bearing Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30/AD-50 Idler Bearing Assembly

55

Illus. No.

Part No.

Qty.

Description

1

100108

1

5L-680 V-Belt (idler to basket [tumbler]) For Use On AD-30

 

 

 

and AD-50 Models

2

101129

1

9” x 2-1/2” Compound Pulley (for use on AD-30 models Only)

 

101140

1

14” x 3” Compound Pulley (for use on AD-50 models Only)

3

100110

1

4L-500 V-Belt (idler to motor) For Use On AD-30 Models ONLY

 

100112

1

4L-610 V-Belt (idler to motor) For Use On AD-50 Models ONLY

4

154301

2

5/16-18 x 1” Allen Setscrew

5

100705

1

3/16” x 3/16” x 1-3/8” Key

6

301850

1

5/8” x 3/4” Idler Shaft

7

152002

3

1/4-20 Hex Nut

8

153007

3

1/4” Lock Washer

9

100214

2

5/8” Flange Bearing

10

150521

3

1/4-20 x 2” Carriage Bolt

11

801007

1

Idler Bearing Assembly Complete

 

 

 

(includes illus. nos. 5 through 17)

12

150617

2

3/8-16 x 1” Hex Head Machine Bolt

13

153005

2

3/8” Lock Washer

14

153004

2

3/8” Flat Washer

15

801009

1

Idler Square Washer

16

152004

1

5/16-18 Hex Nut

17

150509

1

5/16-18 x 3” Hex Head Machine Bolt

Telephone: (508) 678-9000

Fax: (508) 678-9447

56 AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

For Models Mfd. with Non-Tapered Ribs ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 57

For Models Mfd. with Non-Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1

100110

1

4L-500 V-Belt (motor to idler)

2

100701

1

3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)

3

101104

1

1/2” x 2” Motor Pulley (for use on 1-phase [1ø] models Only)

 

101132

1

5/8” x 2” Motor Pulley (for use on 3-phase [3ø] models Only)

4

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

5

153002

4

5/16” Lock Washer

6

153001

4

5/16” Flat Washer

7*

100065

1

1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor with Plug

8

122701

8

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

9

137030

1

8-Pin Housing Connector

10

152004

4

5/16-18 Hex Nut

11

153002

4

5/16” Lock Washer

12

153001

4

5/16” Flat Washer

13

117600

4

Noise Suppressor Tape (sold by the foot)

14

154000

4

5/16-18 Tinnerman Nut

15

800908

1

AD-30 Non-Reversing Motor Mount ONLY (56Z frame)

 

803938*

1

1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 7 and 13 through 20)

 

 

 

Plug Type Motor

 

803883*

1

1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 7 and 13 through 22)

 

 

 

Non-Plug Type Motor

 

803809*

1

1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 7 and 13 through 22)

 

 

 

Non-Plug Type Motor

16

153050

2

1/2” S.A.E. Flat Washer

17

100604

1

12-1/2” Impellor (fan/blower) with 1/2” Bore

18

100702

1

1/8” x 1/8” x 1-1/2” Key

19

153050

2

1/2” S.A.E. Flat Washer

20

152006

2

1/2-20 Left Hand Jam Nut

21

120200

1

3/8” x 90° Connector

22*

100004

1

1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor (56Z frame) Non-Plug Type Motor

 

100007

1

1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor

*Specify voltage when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

58 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

For Models Mfd. with Non-Tapered Ribs ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 59

For Models Mfd. with Non-Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1

100112

1

4L-610 V-Belt (motor to idler)

2

100701

1

3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)

3

101133

1

5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)

 

101130

1

5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only)

4

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

5

153002

4

5/16” Lock Washer

6

153001

4

5/16” Flat Washer

7

120200

1

3/8” x 90° Connector

8

100033*

1

3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor (56Z frame)

 

100034

1

3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor

 

 

 

(56Z frame)

 

100007*

1

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor (56Z frame)

9

152004

4

5/16-18 Hex Nut

10

153002

4

5/16” Lock Washer

11

153001

4

5/16” Flat Washer

12

117600

4

Noise Suppressor Tape (sold by the foot)

13

154000

4

5/16-18 Tinnerman Nut

14

800905

1

AD-50 Non-Reversing Motor Mount ONLY (56Z frame)

 

803852*

1

3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

 

803793*

1

3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 1 through 19)

 

803849*

1

1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

 

803856*

1

1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

15

153050

2

1/2” S.A.E. Flat Washer

16

100604

1

12-1/2” Impellor (fan/blower) with 1/2” Bore

17

100702

1

1/8” x 1/8” x 1-1/2” Key

18

153050

2

1/2” S.A.E. Flat Washer

19

152006

2

1/2-20 Left Hand Jam Nut

*Specify voltage when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

60

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Non-Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1

100112

1

4L-610 V-Belt (motor to idler)

2

100701

1

3/16” x 3/16” x 1” Key

3

101133

1

5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)

 

101130

1

5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only)

4

120200

1

3/8” x 90° Connector

5

181003*

1

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor

6

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

7

153002

4

5/16” Lock Washer

8

153001

4

5/16” Flat Washer

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly (continued)

61

For Models Mfd. with Non-Tapered Ribs ONLY

 

Illus. No.

Part No.

Qty.

Description

9

100065

1

1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor - Plug Type Motor

10

122701

8

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

11

137030

1

8-Pin Housing Connector

12

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

13

153002

4

5/16” Lock Washer

14

153001

4

5/16” Flat Washer

15

154000

8

5/16-18 Tinnerman Nut

16

152004

4

5/16-18 Hex Nut

17

153002

4

5/16” Lock Washer

18

153001

4

5/16” Flat Washer

19

800912

1

AD-50 Reversing Motor Mount ONLY

 

803873*

1

AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor Mount Assembly Complete - Plug Type Motor

 

 

 

(includes illus. nos. 2 through 15 and 19 through 25)

 

803869*

1

AD-50 1ø 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor Mount Assembly Complete - Non-Plug Type Motor

 

 

 

(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)

 

803940

1

AD-50 3ø 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor Mount Assembly Complete - Non-Plug Type Motor

 

 

 

(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)

20

117600

4

Noise Suppressor Tape (sold by the foot)

21

153050

2

1/2” S.A.E. Flat Washer

22

100702

1

1/8” x 1/8” x 1-1/2” Key

23

100604

1

12-1/2” Impellor (fan/blower) with 1/2” Bore

24

153050

2

1/2” S.A.E. Flat Washer

25

152006

2

1/2-20 Left Hand Jam Nut

26

100004*

1

1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor (56Z frame) Non-Plug Type Motor

 

100035

1

1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor

 

 

 

(56Z frame) Non-Plug Type Motor

27

120200

1

3/8” x 90° Connector

*Specify voltage when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

62 AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

For Models Mfd. with Tapered Ribs ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly 63

For Models Mfd. with Tapered Ribs ONLY

Illus. No.

Part No.

Qty.

Description

1

100112

1

4L-610 V-Belt (motor to idler)

2

100701

1

3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)

3

101130

1

5/8” x 2-1/2” Motor Pulley (for use on 60 Hz models Only)

 

101139

1

5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only)

4

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

5

153002

4

5/16” Lock Washer

6

153001

4

5/16” Flat Washer

7

120200

1

3/8” x 90° Connector

8

100033*

1

3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor (56Z frame)

 

100034

1

3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor

 

 

 

(56Z frame)

 

100007*

1

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor (56Z frame)

9

152004

4

5/16-18 Hex Nut

10

153002

4

5/16” Lock Washer

11

153001

4

5/16” Flat Washer

12

117600

4

Noise Suppressor Tape (sold by the foot)

13

154000

4

5/16-18 Tinnerman Nut

14

800905

1

AD-50 Non-Reversing Motor Mount ONLY

 

803972*

1

3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

 

803973*

1

3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 1 through 19)

 

803970*

1

1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

 

803971*

1

1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete

 

 

 

(includes illus. nos. 3 through 8 and 12 through 19)

15

153050

2

1/2” S.A.E. Flat Washer

16

100604

1

12-1/2” Impellor (fan/blower) with 1/2” Bore

17

100702

1

1/8” x 1/8” x 1-1/2” Key

18

153050

2

1/2” S.A.E. Flat Washer

19

152006

2

1/2-20 Left Hand Jam Nut

*Specify voltage when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

64

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

 

For Models Mfd. with Tapered Ribs ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

65

For Models Mfd. with Tapered Ribs ONLY

 

Illus. No.

Part No.

Qty.

Description

1

100112

1

4L-610 V-Belt (motor to idler)

2

100701

1

3/16” x 3/16” x 1” Key

3

101130

1

5/8” x 2-1/2” Motor Pulley (for use on 30 Hz models Only)

 

101139

1

5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only)

4

120200

1

3/8” x 90° Connector

5

181003*

1

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor

6

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

7

153002

4

5/16” Lock Washer

8

153001

4

5/16” Flat Washer

9

100065

1

1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled

 

 

 

(T.E.F.C.) Motor - Plug Type Motor

10

122701

8

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

11

137030

1

8-Pin Housing Connector

12

150501

4

5/16-18 x 3/4” Hex Head Machine Bolt

13

153002

4

5/16” Lock Washer

14

153001

4

5/16” Flat Washer

15

154000

8

5/16-18 Tinnerman Nut

16

152004

4

5/16-18 Hex Nut

17

153002

4

5/16” Lock Washer

18

153001

4

5/16” Flat Washer

19

800912

1

AD-50 Reversing Motor Mount ONLY

 

803974*

1

AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor Mount Assembly Complete - Plug Type Motor

 

 

 

(includes illus. nos. 2 through 9, 12 through 15, and 19 through 25)

 

803977

1

AD-50 3ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)

 

 

 

Motor Mount Assembly Complete - Non-Plug Type Motor

 

 

 

(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)

20

117600

4

Noise Suppressor Tape (sold by the foot)

21

153050

2

1/2” S.A.E. Flat Washer

22

100702

1

1/8” x 1/8” x 1-1/2” Key

23

100604

1

12-1/2” Impellor (fan/blower) with 1/2” Bore

24

153050

2

1/2” S.A.E. Flat Washer

25

152006

2

1/2-20 Left Hand Jam Nut

26

100035

1

1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor

 

 

 

(56Z frame) Non-Plug Type Motor

27

120200

1

3/8” x 90° Connector

*Specify voltage when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

66

Sensor Bracket Assemblies

Microprocessor

Sensor Bracket

Assembly

Non-Computer

Sensor Bracket

Assembly

Illus. No.

Part No.

Qty.

Description

1

880251

1

1/4” Temperature Sensor Probe Assembly

 

 

 

(includes illus. nos. 1 and 5 through 8)

2

130301

1

225° Large Manual Reset Thermostat

3

153010

2

#6 Star Washer

4

152000

2

#6-32 Hex Nut

5

121028

2

Insulated Terminal ONLY

6

122701

4

Socket Terminal ONLY

7

122605

1

4-Pin Socket Connector ONLY

8

154007

2

1/4” Tinnerman Push On Fastener

9

150000

2

#6-32 x 1/4” Slotted Round Head Machine Screw

10

801425

1

Microprocessor Sensor Bracket Assembly Complete

 

 

 

(includes illus. nos. 1 through 10)

 

305007

1

Universal Sensor Bracket ONLY

11

122604

1

4-Pin Connector ONLY

12

122700

4

Pin Terminal ONLY

13

150301

2

#8-18 x 7/16” Phillips Pan Head TEK Screw

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Sensor Bracket Assemblies (continued)

67

Illus. No.

Part No.

Qty.

Description

14

150005

*

#6-32 x 1/4” Phillips Round Head Machine Screw

15

130100

1

150° Large Thermostat

 

130109

1

140° Large Thermostat (for UniDryer® models Only)

16

130301

1

225° Large Manual Reset Thermostat

 

130107

1

160° Large Thermostat (for UniDryer® models Only)

17

130301

1

225° Large Manual Reset Thermostat (for UniDryer® models Only)

18

130101

1

180° Large Thermostat

19

153010

*

#6 Star Washer

20

152000

*

#6-32 Hex Nut

21

840063

1

Sensor Jumper Three (3) ONLY

 

840065

1

Sensor Jumper Four (4) ONLY (for UniDryer® models Only)

22

121028

**

Insulated Terminal ONLY

23

122701

***

Socket Terminal ONLY

24

122609

1

3-Pin Socket Connector ONLY

 

122605

1

4-Pin Socket Connector ONLY (for UniDryer® models Only)

 

831702

1

Sensor Three (3) Bracket Harness Assembly

 

 

 

(includes illus. nos. 22 through 24)

 

840062

1

Sensor Four (4) Bracket Harness Assembly

 

 

 

(includes illus. nos. 22 through 24)

 

 

 

For UniDryer® Models ONLY

25

801405

1

Non-Computer Sensor Three (3) Bracket Assembly Complete

 

 

 

with Thermostats

 

 

 

(includes illus. nos. 14 through 25)

 

 

 

For Models Mfd. as of August 1, 1993

 

801411

1

Non-Computer Sensor Four (4) Bracket Assembly Complete

 

 

 

with Thermostats

 

 

 

(includes illus. nos. 14 through 25)

 

 

 

For UniDryer® Models ONLY

 

305007

1

Universal Sensor Bracket ONLY

26

122608

1

3-Pin Connector ONLY

 

122604

 

4-Pin Connector ONLY

 

 

 

(for UniDryer® models Only)

27

122700

***

Pin Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

28

150301

2

#8-18 x 7/16” Phillips Pan Head TEK Screw

*Quantity is 4 or 5.

**Quantity is 6 or 8.

***Quantity is 3 or 4.

Telephone: (508) 678-9000

Fax: (508) 678-9447

68

ADG-30 Standard Non-Hi/Lo Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADG-30 Standard Non-Hi/Lo Burner Assembly

69

For Models Mfd. with Globar® Ignition ONLY

 

Illus. No.

Part No.

Qty.

Description

1*

---------**

1

ADG-30 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices

 

 

 

(includes illus. nos. 1 through 20 and 22 through 30)

 

 

 

Refer to Globar® Burner Assembly Listing on page 100

 

804004

1

Non-Heat Reclaimer Burner Box ONLY

2

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

4

130401

1

330° Hi-Limit

5

319704

1

Hi-Limit Mounting Bracket ONLY

6

151000

2

#6-32 Pal Nut

7

152001

2

#8-32 Hex Nut

8

153012

1

#8 Star Washer

9

130500

1

Infrared (IR) Sensor ONLY

10

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

11

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

12

802705

1

Infrared (IR)/Globar® Mounting Bracket ONLY

13

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

14

153000

2

#8 Steel Burr

15

151001

2

#8-32 Pal Nut

16

141105

2

Large Burner Tube

17

150002

1

#6-32 x 1” Phillips Round Head Machine Screw

18

153017

1

#6 Steel Burr

19

128910

1

Globar® ONLY

20

151000

2

#6-32 Pal Nut

21*

---------

2

Burner Orifice

 

 

 

(refer to Globar® Burner Orifice Listing on page 100)

22

141206

1

3/8” Swage Manifold ONLY

23

319501

1

3/8” Gas Valve Mounting Bracket ONLY

24

150301

3

#8-18 x 7/16” Phillips Pan Head TEK Screw

25

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

26

140004

1

3/8” Globar® (natural gas) Gas Valve

 

140402

1

3/8” Valve Liquid Propane (L.P.) Conversion Kit

27

318700

2

Pipe Bracket (bent)

28

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

29

142809

1

1/2” x 29-1/8” Pipe

30

881367

1

1/2” Union Shutoff with Tail Piece

---

---------*

1

Conversion Kit

 

 

 

(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing

 

 

 

on page 100)

---

410000

1

3/8” Allen Wrench

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

Telephone: (508) 678-9000

Fax: (508) 678-9447

70

ADG-50 Standard Non-Hi/Lo Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADG-50 Standard Non-Hi/Lo Burner Assembly

71

For Models Mfd. with Globar® Ignition ONLY

 

Illus. No.

Part No.

Qty.

Description

1*

---------**

1

ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices

 

 

 

(includes illus. nos. 1 through 20 and 22 through 29)

 

 

 

Refer to Globar® Burner Assembly Listing on page 100

 

804004

1

Non-Heat Reclaimer Burner Box ONLY

2

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

4

130401

1

330° Hi-Limit

5

319704

1

Hi-Limit Mounting Bracket ONLY

6

151000

2

#6-32 Pal Nut

7

152001

2

#8-32 Hex Nut

8

153012

1

#8 Star Washer

9

130500

1

Infrared (IR) Sensor ONLY

10

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

11

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

12

802705

1

Infrared (IR)/Globar® Mounting Bracket ONLY

13

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

14

153000

2

#8 Steel Burr

15

151001

2

#8-32 Pal Nut

16

141105

2

Large Burner Tube

17

150002

1

#6-32 x 1” Phillips Round Head Machine Screw

18

153017

1

#6 Steel Burr

19

128910

1

Globar® ONLY

20

151000

2

#6-32 Pal Nut

21*

---------

2

Burner Orifice

 

 

 

(refer to Globar® Burner Orifice Listing on page 100)

22

141205

1

1/2” Manifold ONLY (2-port)

23

318700

1

Pipe Bracket (bent)

24

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

25

140005

1

1/2” Globar® (natural gas) Gas Valve

 

140411

1

1/2” Valve Liquid Propane (L.P.) Conversion Kit

26

318700

2

Pipe Bracket (bent)

27

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

28

142809

1

1/2” x 29-1/8” Pipe

29

881367

1

1/2” Union Shutoff with Tail Piece

---

---------*

1

Conversion Kit

 

 

 

(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing

 

 

 

on page 100)

---

410001

1

1/2” Allen Wrench

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

Telephone: (508) 678-9000

Fax: (508) 678-9447

72

ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly

 

For Models Mfd. with Globar® Ignition ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly

73

For Models Mfd. with Globar® Ignition ONLY

 

Illus. No.

Part No.

Qty.

Description

1*

---------**

1

ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices

 

 

 

(includes illus. nos. 1 through 20 and 22 through 29)

 

 

 

Refer to Globar® Burner Orifice Listing on page 100

 

804004

1

Non-Heat Reclaimer Burner Box ONLY

2

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

4

130401

1

330° Hi-Limit

5

319704

1

Hi-Limit Mounting Bracket ONLY

6

151000

2

#6-32 Pal Nut

7

152001

2

#8-32 Hex Nut

8

153012

1

#8 Star Washer

9

130500

1

Infrared (IR) Sensor ONLY

10

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

11

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

12

802705

1

Infrared (IR)/Globar® Mounting Bracket ONLY

13

150108

2

#8-32 x 1/2” Phillips Pan Head Screw

14

153000

2

#8 Steel Burr

15

151001

2

#8-32 Pal Nut

16

141105

2

Large Burner Tube

17

150002

1

#6-32 x 1” Phillips Round Head Machine Screw

18

153017

1

#6 Steel Burr

19

128910

1

Globar® ONLY

20

151000

2

#6-32 Pal Nut

21*

---------

2

Burner Orifice

 

 

 

(refer to Globar® Burner Assembly Listing on page 100)

22

141205

1

1/2” Manifold ONLY (2-port)

23

318700

1

Pipe Bracket (bent)

24

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

25

140010

1

1/2” Hi/Lo Globar® (natural gas) Gas Valve

 

140011

1

1/2” Hi/Lo Globar® Liquid Propane (L.P.) Gas Valve

26

318700

2

Pipe Bracket (bent)

27

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

28

142809

1

1/2” x 29-1/8” Pipe

29

881367

1

1/2” Union Shutoff with Tail Piece

---

---------*

1

Liquid Propane (L.P.) Conversion Kit

 

 

 

(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing

 

 

 

on page 100)

---

410001

1

1/2” Allen Wrench

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

Telephone: (508) 678-9000

Fax: (508) 678-9447

74

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. with Direct Spark Ignition (DSI) ONLY

Direct Spark Ignition (DSI) module may be mounted on the left outside wall (as shown) or it may be mounted on the inside of the left side panel.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly

75

For Models Mfd. with Direct Spark Ignition (DSI) ONLY

 

Illus. No.

Part No.

Qty.

Description

1

318030

1

Direct Spark Ignition (DSI) Burner Shield (2-tube)

2

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

3

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

128915

1

Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly

 

880134

1

Ignitor/Flame-Probe Kit Assembly

 

 

 

(includes high voltage [HV] wire and connector assembly)

5

880330

1

High Voltage (HV) Wire and Connector Assembly

6

150103

2

#8-32 x 1/2” Pan Head Machine Screw

7

153000

2

#8 Steel Burr

8

151001

2

#8-32 Pal Nut

9

141105

2

Large Tube Burner ONLY

10*

---------

2

Burner Orifice

 

 

 

(refer to Direct Spark Ignition [DSI] Burner Orifice Listing

 

 

 

on page 101)

11

141230

1

1/2” Direct Spark Ignition (DSI) Manifold (2-port)

12

318700

1

Pipe Bracket (bent)

13

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

14

128927

1

1/2” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas)

 

 

 

Gas Valve

 

140411

1

1/2” Valve Liquid Propane (L.P.) Conversion Kit

 

880960

1

1/2” Direct Spark Ignition (DSI) Gas Valve/Liquid Propane (L.P.)

 

 

 

Conversion Kit Combination

15

881367

1

1/2” Union Shutoff with Tail Piece

16

142809

1

1/2” x 29-1/8” Pipe

17

150309

4

#10-16 x 1/2” Hex Head TEK Crimptite Screw

18

318700

2

Pipe Bracket (bent)

19*

---------**

1

Direct Spark Ignition (DSI) Burner Assembly Complete Less Orifices

 

 

 

(includes illus. nos. 1 through 9 and 11 through 23)

 

 

 

Refer to Direct Spark Ignition (DSI) Burner Assembly Listing

 

 

 

on page 101

 

850851

1

Non-Heat Reclaimer Burner Box ONLY

 

850861

1

Heat Reclaimer Burner Box ONLY

20

880815

1

ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)

21

150299

4

#10 x 1” Hex Washer TEK Screw

22

319505

1

Direct Spark Ignition (DSI) Module Mounting Bracket ONLY

23

150301

***

#8-18 x 7/16” Phillips Pan Head TEK Screw

---

---------

1

Conversion Kit

 

 

 

(refer to Direct Spark Ignition [DSI] Liquid Propane [L.P.]

 

 

 

Conversion Kit Listing on page 101)

*Consult factory for elevations over 2,000 feet.

**Burner orifices are not included and must be ordered separately.

***As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

76

ADE-30/ADE-50 Electric Oven Assembly

For Models Mfd. as of November 12, 1990

ELECTRIC OVEN (FRONT VIEW)

ELECTRIC OVEN (REAR VIEW)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADE-30/ADE-50 Electric Oven Assembly

77

For Models Mfd. as of November 12, 1990

 

Illus. No.

Part No.

Qty.

Description

1

803005

1

Large Electric Oven Box ONLY

 

---------*

1

Electric Oven Assembly Complete

2

---------*

-

Electric Element

3

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

4

802800

1

Sail Switch Box with Bracket and Cover ONLY

 

802801

1

Sail Switch Box Assembly Complete

 

 

 

(includes illus. nos. 4 through 12)

5

154004

1

Twin Speed Nut

6

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

7

802799

1

Sail Switch Box Cover and Bracket ONLY

8

122200

1

Sail Switch ONLY

9

150303

2

#4 x 3/4” Phillips Pan Head “A” Machine Screw

10

105500

1

Sail Switch Actuator Rod

11

319202

1

Sail Switch Damper (flat)

12

154002

1

1/8” Push On Fastener

13

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

14

803100

1

Electric Oven Front Cover ONLY

15

320611

1

Large Relay Box Cover ONLY

16

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

17

130400

1

290° Hi-Limit

18

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

19

154001

2

#10-24 Speed Nut

20

121012

1

L-70 Ground Lug

21

152014

3

1/4-20 Free Spin Wash Nut

22

---------*

1

Oven Relay

23

---------*

1

Oven Relay Replacement Coil

24

120081

-

Internal Ceramic Insulator (2 per element)

25

120080

-

External Ceramic Insulator (2 per element)

26

152008

-

#10-32 Hex Nut (4 per element)

27

121011*

-

Bus Bar (sold by the foot)

28

---------*

-

Terminal Lug

29

153009

-

#10 Star Washer (2 per element)

30

320301

1

Large Electric Oven Right Side Cover ONLY

31

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

*Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 102.

Telephone: (508) 678-9000

Fax: (508) 678-9447

78

ADE-30/ADE-50 Electric Oven Assembly

 

For Models Mfd. prior to November 12, 1990

ELECTRIC OVEN (FRONT VIEW)

ELECTRIC OVEN (REAR VIEW)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADE-30/ADE-50 Electric Oven Assembly

79

For Models Mfd. prior to November 12, 1990

 

Illus. No.

Part No.

Qty.

Description

1

803001

1

Large Electric Oven Box ONLY

 

---------*

1

Electric Oven Assembly Complete

2

---------*

-

Electric Element

3

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

4

802800

1

Sail Switch Box with Bracket and Cover ONLY

 

802801

1

Sail Switch Box Assembly Complete

 

 

 

(includes illus. nos. 4 through 12)

5

154004

1

Twin Speed Nut

6

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

7

802799

1

Sail Switch Box Cover and Bracket ONLY

8

122200

1

Sail Switch ONLY

9

150303

2

#4 x 3/4” Phillips Pan Head “A” Machine Screw

10

105500

1

Sail Switch Actuator Rod

11

319202

1

Sail Switch Damper (flat)

12

154002

1

1/8” Push On Fastener

13

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

14

803100

1

Electric Oven Front Cover ONLY

15

320611

1

Large Relay Box Cover ONLY

16

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

17

130400

1

290° Hi-Limit

18

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

19

154001

2

#10-24 Speed Nut

20

150103

2

#8-32 x 3/4” Phillips Round Head Machine Screw

21

120704

-*

Terminal Block

22

154001

2

#10-24 Speed Nut

23

152001

2

#8-32 Hex Nut

24

121012

1

L-70 Ground Lug

25

152014

3

1/4-20 Free Spin Wash Nut

26

---------*

1

Oven Relay

27

---------*

1

Oven Relay Replacement Coil

28

120081

-

Internal Ceramic Insulator (2 per element)

29

120080

-

External Ceramic Insulator (2 per element)

30

152008

-

#10-32 Hex Nut (4 per element)

31

121011*

-

Bus Bar (sold by the foot)

32

---------*

-

Terminal Lug

33

153009

-

#10 Star Washer (2 per element)

34

320301

1

Large Electric Oven Right Side Cover ONLY

35

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

*Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 103.

Telephone: (508) 678-9000

Fax: (508) 678-9447

80

ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies

 

For Globar® Models and Direct Spark Ignition (DSI) Models ONLY

Illus. No.

Part No.

Qty.

Description

1

154004

1

Twin Speed Nut

2

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

802799

1

Sail Switch Box Cover and Bracket ONLY

4

150303

2

#4 x 3/4” Phillips Pan Head “A” Machine Screw

5

122200

1

Sail Switch ONLY

6

105500

1

Sail Switch Actuator Rod

7

319202

1

Sail Switch Damper (flat)

8

154002

1

1/8” Push On Fastener

9

802800

1

Sail Switch Box with Cover and Bracket ONLY

 

802801

1

Sail Switch Assembly Complete

 

 

 

(includes illus. nos. 1 through 8)

10

142809

1

1/2” x 29-1/8” Pipe

11

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

12

319704

1

Hi-Limit Mounting Bracket ONLY

13

151000

2

#6-32 Pal Nut

14

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

15

130401

1

330° Hi-Limit ONLY

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve

81

For Globar® Ignition Models ONLY

 

Illus. No.

Part No.

Qty.

Description

1

140111

1

Holding Coil

2

140112

1

Booster Coil

3

140110

1

Secondary Coil

Telephone: (508) 678-9000

Fax: (508) 678-9447

82

ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve

 

For Globar® Ignition Models ONLY

Illus. No.

Part No.

Qty.

Description

1

140116

1

Holding Coil

2

140115

1

Booster Coil

3

140117

1

Secondary Coil

4

140118

1

Hi/Lo Coil

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Microprocessor Reversing Rear Control Box Assembly

83

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays

Illus. No.

Part No.

Qty.

Description

1

150301

6

#8-18 x 7/16” Phillips Pan Head TEK Screw

2

322808

1

Control Box Cover Plate ONLY (12” x 8-1/2”)

3

137060

1

Arc Suppressor (A.S.) Board Three (3)

4

137013

4

Nylon Standoff

5

153002

2

5/16” Lock Washer

6

152004

2

5/16-18 Hex Nut

7

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

8

132425

1

Impellor (blower/fan) Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

 

132427

1

Impellor (blower/fan) Contactor Replacement Coil

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

9

151001

2

#8-32 Pal Nut

10

322807

1

Contactor Mounting Panel ONLY

11

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

12

132426

1

Reversing Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

 

132427

2

Reversing Contactor Replacement Coil

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

13

151001

2

#8-32 Pal Nut

Telephone: (508) 678-9000

Fax: (508) 678-9447

84

Dual Timer Reversing Rear Control Box Assembly

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays

Illus. No.

Part No.

Qty.

Description

1

150301

6

#8-18 x 7/16” Phillips Pan Head TEK Screw

2

322808

1

Control Box Cover Plate ONLY (12” x 8-1/2”)

3

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

4

132200

1

Reversing Timer (60 Hz)

 

132202

1

Reversing Timer (50 Hz)

5

151001

2

#8-32 Pal Nut

6

153002

2

5/16” Lock Washer

7

152004

2

5/16-18 Hex Nut

8

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

9

132425

1

Impellor (blower/fan) Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

 

132427

1

Impellor (blower/fan) Contactor Replacement Coil

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

10

151001

2

#8-32 Pal Nut

11

322807

1

Contactor Mounting Panel ONLY

12

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

13

132426

1

Reversing Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

 

132427

2

Reversing Contactor Replacement Coil

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

14

151001

2

#8-32 Pal Nut

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Microprocessor Reversing Rear Control Box Assembly

85

For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays

Illus. No.

Part No.

Qty.

Description

1

150301

6

#8-18 x 7/16” Phillips Pan Head TEK Screw

2

322808

1

Control Box Cover Plate ONLY (12” x 8-1/2”)

3

137060

1

Arc Suppressor (A.S.) Board Three (3)

4

137013

4

Nylon Standoff

5

153002

2

5/16” Lock Washer

6

152004

2

5/16-18 Hex Nut

7

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

8

132400

1

Impellor (blower/fan) Contactor

 

 

 

(for 208 volt models Only)

9

151001

2

#8-32 Pal Nut

10

322807

1

Contactor Mounting Panel ONLY

11

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

12

132404

1

Reversing Contactor

 

 

 

(for 208 volt - 60 Hz models Only)

 

132401

2

Reversing Contactor

 

 

 

(for 220/230 volt - 60 Hz models Only)

13

132416

1

Reversing Contactor Replacement Coil

 

 

 

(for 208 volt - 60 Hz models Only)

 

132415

2

Reversing Contactor Replacement Coil

 

 

 

(for 220/230 volt - 60 Hz models Only)

 

132407

2

Reversing Contactor Replacement Coil

 

 

 

(for 240 volt - 50 Hz models Only)

14

151001

2

#8-32 Pal Nut

Telephone: (508) 678-9000

Fax: (508) 678-9447

86

Dual Timer Reversing Rear Control Box Assembly

For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays

Illus. No.

Part No.

Qty.

Description

1

150301

6

#8-18 x 7/16” Phillips Pan Head TEK Screw

2

322808

1

Control Box Cover Plate ONLY (12” x 8-1/2”)

3

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

4

132200

1

Reversing Timer (60 Hz)

 

132202

1

Reversing Timer (50 Hz)

5

151001

2

#8-32 Pal Nut

6

153002

2

5/16” Lock Washer

7

152004

2

5/16-18 Hex Nut

8

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

9

132400

1

Impellor (blower/fan) Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

10

151001

2

#8-32 Pal Nut

11

322807

1

Contactor Mounting Panel ONLY

12

150108

2

#8-32 x 1/2” Phillips Pan Head Machine Screw

13

132404

1

Reversing Contactor

 

 

 

(for 208 volt - 60 Hz models Only)

 

132401

2

Reversing Contactor

 

 

 

(for 220/230 volt - 60 Hz models Only)

14

132416

1

Reversing Contactor Replacement Coil

 

 

 

(for 208 volt - 60 Hz models Only)

 

132415

2

Reversing Contactor Replacement Coil

 

 

 

(for 220/230 volt - 60 Hz models Only)

 

132407

2

Reversing Contactor Replacement Coil

 

 

 

(for 240 volt - 50 Hz models Only)

15

151001

2

#8-32 Pal Nut

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

3-Phase (3Ø) Motor, Electric Relay Panel Assembly

87

For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays

 

Illus. No.

Part No.

Qty.

Description

1

150309

6

#10-16 x 1/2” Hex Head TEK Crimptite Screw

2

311913

1

Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)

 

311921

1

Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)

3*

880662

1

Dual RC Suppressor with Tab Receptacle ONLY

4

132400

1

Impellor (blower/fan) Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

5

151001

2

#8-32 Pal Nut

*Used on microprocessor controller (computer) models ONLY.

Telephone: (508) 678-9000

Fax: (508) 678-9447

88

3-Phase (3Ø) Motor, Electric Relay Panel Assembly

For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays

Illus. No.

Part No.

Qty.

Description

1

150309

6

#10-16 x 1/2” Hex Head TEK Crimptite Screw

2

311913

1

Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)

 

311921

1

Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)

3*

137015

1

Arc Suppressor (A.S.) Capacitor ONLY

4

132425

1

Impellor (blower/fan) Contactor

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

 

132427

1

Impellor (blower/fan) Contactor Replacement Coil

 

 

 

(for 208/230/240 volt - 50/60 Hz models Only)

5

150108

4

#8-32 x 1/2” Phillips Pan Head Machine Screw

6

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

7

151001

4

#8-32 Pal Nut

8

311920

1

3-Phase (3ø) Non-Reversing Contactor Mounting Bracket

*Used on microprocessor controller (computer) models ONLY.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Control/Heat Step Down Transformer

89

For Globar® Models and High Pressure Motorized Steam Valve Models ONLY

 

Illus. No.

Part No.

Qty.

Description

1*

132002

1

200 Watt Transformer (terminals are not included)

 

 

 

For 120 Volt Models ONLY

 

880210

1

Terminal Package for Globar® Transformer

2

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

3

121400

2

Universal Bushing

*Used on models with 208 volt and 230 volt controls ONLY.

Telephone: (508) 678-9000

Fax: (508) 678-9447

90

ADS-30 Steam Coil Damper Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADS-30 Steam Coil Damper Assembly

91

Illus. No.

Part No.

Qty.

Description

1

165008

1

ADS-30 Steam Coil Assembly

2

153002

6

5/16” Lock Washer

3

152004

6

5/16-18 Hex Nut

4

152002

4

1/4-20 Hex Nut

5

153007

4

1/4” Lock Washer

6

820321

2

Damper Hinge Assembly

7

803416

1

ADS-30 Steam Damper Assembly

 

 

 

(includes illus. nos. 7, 10, and 11)

8

153007

4

1/4” Lock Washer

9

152002

4

1/4-20 Hex Nut

10

115995

36

Steam Damper Gasket (sold by the inch)

11

102350

1

Steam Damper Gasket (68-1/2” length)

12

151007

1

7/16-20 Stainless Steel Acorn Nut

13

152007

1

7/16-20 Hex Nut

14

100495

1

1-1/16” x 3” Stroke Piston

15

323365

2

Left and Right Piston Support

16

152002

2

1/4-20 Hex Nut

17

153007

2

1/4” Lock Washer

18

100472

1

1/4” x 1/8” Connector

19

143110

1

1/4” Tubing (sold by the foot)

20

100472

1

1/4” x 1/8” Connector

21

100496

1

1/8” Needle Valve

22

143238

1

1/8” Close Nipple

23

100498

1

3-Way Micro Valve - 24 VAC

24

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

25

153010

2

#6 Star Washer

26

152000

2

#6-32 Hex Nut

27

330987

1

Micro Valve Support Bracket

28

152002

2

1/4-20 Hex Nut

29

153007

2

1/4” Lock Washer

30

100520

1

1/8” N.P.T. Silencer (muffler)

Telephone: (508) 678-9000

Fax: (508) 678-9447

92

ADS-50 Steam Coil Damper Assembly

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

ADS-50 Steam Coil Damper Assembly

93

Illus. No.

Part No.

Qty.

Description

1

165011

1

ADS-50 Steam Coil Assembly

2

153002

6

5/16” Lock Washer

3

152004

6

5/16-18 Hex Nut

4

152002

4

1/4-20 Hex Nut

5

153007

4

1/4” Lock Washer

6

820321

2

Damper Hinge Assembly

7

803417

1

ADS-50 Steam Damper Assembly

 

 

 

(includes illus. nos. 7, 10, and 11)

8

153007

4

1/4” Lock Washer

9

152002

4

1/4-20 Hex Nut

10

115995

36

Steam Damper Gasket (sold by the inch)

11

102350

1

Steam Damper Gasket (68-1/2” length)

12

151007

1

7/16-20 Stainless Steel Acorn Nut

13

152007

1

7/16-20 Hex Nut

14

100495

1

1-1/16” x 3” Stroke Piston

15

323365

2

Left and Right Piston Support

16

152002

2

1/4-20 Hex Nut

17

153007

2

1/4” Lock Washer

18

100472

1

1/4” x 1/8” Connector

19

143110

1

1/4” Tubing (sold by the foot)

20

100472

1

1/4” x 1/8” Connector

21

100496

1

1/8” Needle Valve

22

143238

1

1/8” Close Nipple

23

100498

1

3-Way Micro Valve - 24 VAC

24

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

25

153010

2

#6 Star Washer

26

152000

2

#6-32 Hex Nut

27

330987

1

Micro Valve Support Bracket

28

152002

2

1/4-20 Hex Nut

29

153007

2

1/4” Lock Washer

30

100520

1

1/8” N.P.T. Silencer (muffler)

Telephone: (508) 678-9000

Fax: (508) 678-9447

94

ADS-30/ADS-50 Steam Coil/Valve Assembly

 

For Motorized Type and Solenoid Type Models ONLY

Illus. No.

Part No.

Qty.

Description

1

803500

1

Large Steam Rack (for high pressure Only)

 

803501

1

Large Steam Rack (for low pressure Only)

2

150300

6

#10-16 x 1/2” Hex Washer TEK Screw

3

165002

1

Large Steam Coil (for high pressure Only)

 

165003

1

Large Steam Coil (for low pressure Only)

4

142711

1

1” Closed Nipple (for high pressure Only)

 

142713

1

1-1/4” Closed Nipple (for low pressure Only)

5

165107

1

1” Motorized Steam Valve (for high pressure Only)

 

165102

1

1-1/4” Solenoid Valve - 120 VAC (for low pressure Only)

 

165103

1

1-1/4” Solenoid Valve - 230 VAC (for low pressure Only)

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-30/AD-50 Outer Top/Back Guard Assemblies

95

Illus. No.

Part No.

Qty.

Description

1

312511

1

Outer Top Assembly (for AD-30 gas models and electric models Only)

 

312518

1

Outer Top Assembly (for ADG-50 gas models Only)

 

312519

1

Outer Top Assembly (for ADE-50 electric models Only)

2

150300

7

#10-16 x 1/2” Hex Washer TEK Screw

3

121101

1

Junction Box Cover ONLY (for gas models and steam models Only)

4

121100

1

Junction Box ONLY (for gas models and steam models Only)

5

801521

1

Back Guard Assembly

6

152014

3

1/4-20 Free Spin Wash Nut

7

880501

1

8” Damper Replacement (for non-heat reclaimer models Only)

8

103500

4

Leveling Leg

Telephone: (508) 678-9000

Fax: (508) 678-9447

96

ADG-30/ADG-50 Heat Reclaimer Assembly

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

121101

1

Junction Box Cover ONLY

2

121100

1

Junction Box ONLY

3

801521

1

Back Guard Assembly

4

152014

3

1/4-20 Free Spin Wash Nut

5

103500

4

Leveling Leg

6*

143513

1

6” x 6” x 5” Tee

7

880502

1

6” Replacement Damper Assembly

8

143509

1

6” Flexible Duct

 

117505

2

Aluminum Duct Tape (sold by the foot)

9*

143501

1

8” x 6” x 6” Tee

10

880502

1

6” Replacement Damper Assembly

11

143509

1

6” Flexible Duct

* Damper assembly must be purchased separately.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Relay Board Listing

97

TYPE

ELECTRIC SERVICE

RELAY BOARD

PART NUM BER

 

 

 

OF HEAT

VOLTAGE

PHASE

WIRE

CONTROL VOLTAGE

 

SERVICE

 

 

 

120 VOLT

208/230 VOLT

GAS

 

 

 

 

 

Globar® Non-Hi/Lo

120

2

137077 or 137150

---------

Globar® Non-Hi/Lo

208/230

2

---------

137079

Globar® Non-Hi/Lo

208/480

3

---------

137079

Globar® Hi/Lo

120

2

137077 or 137150

---------

Globar® Hi/Lo

208/230

2

137077

---------

Globar® Hi/Lo

208/480

3

137077

---------

Direct Spark Ignition (DSI)

120

2

137076*

---------

Direct Spark Ignition (DSI)

208/230

2

---------

137151

Direct Spark Ignition (DSI)

208/480

3

---------

137078

 

 

 

 

 

 

ELECTRIC

 

 

 

 

 

 

208/230

2

---------

137151

15 Kw through 30 Kw

208/480

3

---------

137078*

208

4

137151

 

 

---------

 

380/480

4

---------

137078*

STEAM

 

 

 

 

 

Low Pressure

120

2

137151

---------

Low Pressure

208/230

2

---------

137151

Low Pressure

208/480

3

---------

137078

High Pressure

120

2

137151

---------

High Pressure

208/230

2

---------

137151

High Pressure

208/480

3

---------

137078

*May also use Part No. 137151 (Solid State Relay [SSR] Board).

IMPORTANT: Check label on relay board to verify correct part number.

NOTE: ADC Part No. 137151 (Solid State Relay [SSR] Board) cannot be used with 3-phase (3ø) motors.

Telephone: (508) 678-9000

Fax: (508) 678-9447

98

Microprocessor Coin Acceptors Listing

NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056).

 

 

Single Coin*

ADC Part No.

Nation

Description

125100

U.S. and Canada

25¢ Optic Coin Acceptor

125127

Canada

$1 Canadian Optic Coin Acceptor

125101

United Kingdom

10 New Pence Optic Coin Acceptor

125114

United Kingdom

20 New Pence Optic Coin Acceptor

125115

United Kingdom

1 Pound Optic Coin Acceptor

125106

France

1 French Franc Optic Coin Acceptor

125120

France

2 French Franc Optic Coin Acceptor

125124

France

5 French Franc Optic Coin Acceptor

125109

Denmark

1 Danish Krone Optic Coin Acceptor

125125

Netherlands

25¢ Guilder Optic Coin Acceptor

125108

Australia

10¢ Australian Optic Coin Acceptor

125107

Australia

20¢ Australian Optic Coin Acceptor

125130

Australia

$1 Australian Optic Coin Acceptor

125123

New Zealand

50¢ New Zealand Optic Coin Acceptor

125104

Japan

100 Yen Optic Coin Acceptor

125103

---

0.882 Token Optic Coin Acceptor

125121

---

0.800 Token Optic Coin Acceptor

125129

---

Muller Token Optic Coin Acceptor

125132

Singapore

50¢ Singapore Optic Coin Acceptor

125133

Hong Kong

$1 Hong Kong Optic Coin Acceptor

 

 

Dual Coin*

125116

U.S. and Canada

10¢/25¢ Dual Optic Coin Acceptor

125128

Canada

25¢/$1 Dual Optic Coin Acceptor

125112

United Kingdom

10/20 Pence Dual Optic Coin Acceptor

125110

United Kingdom

10/50 Pence Dual Optic Coin Acceptor

125111

United Kingdom

20/50 Pence Dual Optic Coin Acceptor

125113

United Kingdom

1£/20 Pence Dual Optic Coin Acceptor

125122

France

2/5 Franc Dual Optic Coin Acceptor

125117

Denmark

1/5 Danish Krone Dual Optic Coin Acceptor

125131

Denmark

5/10 Danish Krone Dual Optic Coin Acceptor

125126

Netherlands

25¢/1 Guilder Dual Optic Coin Acceptor

125118

Singapore

20¢/50¢ Singapore Dual Optic Coin Acceptor

125105

Japan

50/100 Yen Dual Optic Coin Acceptor

*Consult factory for coin acceptors not listed.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781