AMD MACH111-18JI, MACH111-7JI, MACH111-5JC, MACH111-10JC, MACH111-12VC Datasheet

...
0 (0)

FINAL

COM’L: -5/7/10/12/15 IND: -7/10/12/14/18

MACH®111-5/7/10/12/15

High-Performance EE CMOS Programmable Logic

DISTINCTIVE CHARACTERISTICS

44 Pins in PLCC and TQFP

32 Macrocells

5 ns tPD Commercial, 7.5 ns tPD Industrial

182 MHz fCNT

32 I/Os; 4 dedicated inputs/clocks; 2 dedicated inputs

32 Flip-flops; 4 clock choices

2 “PALCE26V16” blocks

SpeedLocking™ for guaranteed fixed timing

Bus-Friendly™ Inputs and I/Os

Peripheral Component Interconnect (PCI) compliant (-5/-7/-10/-12)

Programmable power-down mode

Safe for mixed supply voltage system designs

Pin-compatible with the MACH211

GENERAL DESCRIPTION

The MACH111 is a member of Vantis’ high-performance EE CMOS MACH 1 & 2 families. This device has approximately three times the logic macrocell capability of the popular PALCE22V10 without loss of speed.

The MACH111 consists of two PAL® blocks interconnected by a programmable switch matrix. The two PAL blocks are essentially “PALCE26V16” structures complete with product-term arrays and programmable macrocells, which can be programmed as high speed or low power. The switch matrix connects the PAL blocks to each other and to all input pins, providing a high degree of connectivity between the fully connected PAL blocks. This allows designs to be placed and routed efficiently.

The MACH111 macrocell provides either registered or combinatorial outputs with programmable polarity. If a registered configuration is chosen, the register can be configured as D-type or T- type to help reduce the number of product terms. The register type decision can be made by the designer or by the software. All macrocells can be connected to an I/O cell. If a buried macrocell is desired, the internal feedback path from the macrocell can be used, which frees up the I/O pin for use as an input.

Vantis offers software design support for MACH devices through its own development system and device fitters integrated into third-party CAE tools. Platform support extends across PCs, Sun and HP workstations under advanced operating systems such as Windows 3.1, Windows 95 and NT, SunOS and Solaris, and HPUX.

Publication# 20420

Rev: B

Amendment/+1

Issue Date: June 1998

MACHXL® software is a complete development system for the PC, supporting Vantis' MACH devices. It supports design entry with Boolean and behavioral syntax, state machine syntax and truth tables. Functional simulation and static timing analysis are also included in this easy-to- use system. This development system includes high-performance device fitters for all MACH devices.

The same fitter technology included in MACHXL software is seamlessly incorporated into third-party tools from leading CAE vendors such as Synario, Viewlogic, Mentor Graphics, Cadence and MINC. Interface kits and MACHXL configurations are also available to support design entry and verification with other leading vendors such as Synopsys, Exemplar, OrCAD, Synplicity and Model Technology. These MACHXL configurations and interfaces accept EDIF 2.0.0 netlists, generate JEDEC files for MACH devices, and create industry-standard SDF, VITAL-compliant VHDL and Verilog output files for design simulation.

Vantis offers in-system programming support for MACH devices through its MACHPRO® software enabling MACH device programmability through JTAG compliant ports and easy-to-use PC interface. Additionally, MACHPRO generated vectors work seamlessly with HP3070, GenRad and Teradyne testers to program MACH devices or test them for connectivity.

All MACH devices are supported by industry standard programmers available from a number of vendors. These programmer vendors include Advin Systems, BP Microsystems, Data I/O Corporation, Hi-Lo Systems, SMS GmbH, Stag House, and System General.

2

MACH111-5/7/10/12/15

AMD MACH111-18JI, MACH111-7JI, MACH111-5JC, MACH111-10JC, MACH111-12VC Datasheet

BLOCK DIAGRAM

 

Block A

 

 

 

 

I/O0 – I/O15

 

I0-I1/CLK0

 

 

 

I3-I4/CLK2

 

 

16

16

 

 

 

 

 

 

 

I/O Cells

 

 

 

 

16

16

 

 

 

 

 

 

4

Macrocells

 

4

2

 

 

 

 

OE

 

 

 

 

52 x 70

 

4

 

 

AND Logic Array

 

 

 

 

 

 

 

and

 

 

 

 

Logic Allocator

 

 

 

 

26

 

 

 

 

Switch Matrix

 

 

 

26

 

 

 

 

52 x 70

 

2

 

 

AND Logic Array

 

 

 

 

and

 

 

 

 

Logic Allocator

 

 

 

 

OE

 

 

 

4 Macrocells

4

16 16

I/O Cells

2

 

16

16

I/O16 – I/O31

CLK3/I5

Block B

CLK1/I2

 

20420B-1

MACH111-5/7/10/12/15

3

CONNECTION DIAGRAM

Top View

 

 

 

 

 

 

 

 

44-Pin PLCC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O4

I/O3

I/O2

I/O1

I/O0

GND

VCC

I/O31

I/O30

I/O29

I/O28

 

 

 

 

5

4

3

2

1

44

43 42

41 40

 

 

 

 

6

 

 

I/O5

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39

I/O27

 

I/O6

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38

I/O26

 

I/O7

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

37

I/O25

 

I0

10

 

 

 

 

 

 

 

 

 

 

 

 

 

36

I/O24

A

CLK0/I1

11

 

 

 

 

 

 

 

 

 

 

 

 

 

35

CLK3/I5

Block

GND

12

 

 

 

 

 

 

 

 

 

 

 

 

 

34

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLK1/I2

13

 

 

 

 

 

 

 

 

 

 

 

 

 

33

CLK2/I4

 

I/O8

14

 

 

 

 

 

 

 

 

 

 

 

 

 

32

I3

 

I/O9

15

 

 

 

 

 

 

 

 

 

 

 

 

 

31

I/O23

 

I/O10

16

 

 

 

 

 

 

 

 

 

 

 

 

 

30

I/O22

 

I/O11

17

 

 

 

 

 

 

 

 

 

 

 

 

 

29

I/O21

 

 

18

19 20

21 22

23 24

25 26

27 28

 

 

 

 

I/O12

I/O13

I/O14

I/O15

VCC

GND

I/O16

I/O17

I/O18

I/O19

I/O20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

Pin-compatible with the MACH211SP and MACH211.

PIN DESIGNATIONS

CLK/I =

Clock or Input

GND

=

Ground

I

=

Input

I/O

=

Input/Output

VCC

=

Supply Voltage

B Block

20420B-2

4

MACH111-5/7/10/12/15

CONNECTION DIAGRAM

Top View

 

 

 

 

 

 

 

 

 

 

 

 

 

 

44-Pin TQFP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O4

I/O3

I/O2

I/O1

I/O0

GND

VCC

I/O31

I/O30

I/O29

I/O28

 

 

 

 

 

 

44

43

42

41

40

39

38

37

 

36

 

35

 

34

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O5

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

33

 

 

 

I/O27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O6

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32

 

 

 

I/O26

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O7

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31

 

 

 

I/O25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

I0

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

 

 

 

I/O24

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLK0/I1

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29

 

 

 

CLK3/I5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Block

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLK1/I2

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

 

 

 

CLK2/I4

 

GND

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

28

 

 

 

GND

 

I/O8

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26

 

 

 

I3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O9

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

I/O23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O10

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24

 

 

 

I/O22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O11

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23

 

 

 

I/O21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

 

13

 

14

 

15

 

16

 

17

 

18

 

19

 

20

 

21

 

22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I/O12

I/O13

I/O14

I/O15

VCC

GND

I/O16

I/O17

I/O18

I/O19

I/O20

 

 

 

Note:

Pin-compatible with the MACH211SP.

B Block

20420B-3

PIN DESIGNATIONS

CLK/I =

Clock or Input

GND

=

Ground

I

=

Input

I/O

=

Input/Output

VCC

=

Supply Voltage

MACH111-5/7/10/12/15

5

ORDERING INFORMATION

Commercial Products

Vantis programmable logic products for commercial applications are available with several ordering options. The order number (Valid Combination) is formed by a combination of:

MACH 111 -5

J C

 

 

 

 

 

 

FAMILY TYPE

MACH = Macro Array CMOS High-Speed

DEVICE NUMBER

111= 32 Macrocells, 44 Pins, Power-Down option, Bus-Friendly Inputs

OPERATING CONDITIONS

C = Commercial (0°C to +70°C)

PACKAGE TYPE

J= 44-Pin Plastic Leaded Chip Carrier (PL 044)

V= 44-Pin Thin Quad Flat Pack (PQT044)

SPEED

-5 = 5 ns tPD -7 = 7.5 ns tPD

-10 = 10 ns tPD -12 = 12 ns tPD -15 = 15 ns tPD

Valid Combinations

MACH111-5

MACH111-7

MACH111-10

JC, VC

MACH111-12

MACH111-15

Valid Combinations

The Valid Combinations table lists configurations planned to be supported in volume for this device. Consult the local Vantis sales office to confirm availability of specific valid combinations and to check on newly released combinations.

6

MACH111-5/7/10/12/15 (Com’l)

ORDERING INFORMATION

Industrial Products

Vantis programmable logic products for industrial applications are available with several ordering options. The order number (Valid Combination) is formed by a combination of:

MACH 111 -7 J I

FAMILY TYPE

MACH = Macro Array CMOS High-Speed

DEVICE NUMBER

111= 32 Macrocells, 44 Pins, Power-Down option, Bus-Friendly Inputs

SPEED

OPERATING CONDITIONS

I = Industrial (–40°C to +85°C)

PACKAGE TYPE

J = 44-Pin Plastic Leaded Chip

Carrier (PL 044)

-7 = 7.5 ns tPD -10 = 10 ns tPD -12 = 12 ns tPD -14 = 14 ns tPD -18 = 18 ns tPD

Valid Combinations

MACH111-7

MACH111-10

MACH111-12

JI

MACH111-14

MACH111-18

Valid Combinations

The Valid Combinations table lists configurations planned to be supported in volume for this device. Consult the local Vantis sales office to confirm availability of specific valid combinations and to check on newly released combinations.

MACH111-7/10/12/14/18 (Ind)

7

FUNCTIONAL DESCRIPTION

The MACH111 consists of two PAL blocks connected by a switch matrix. There are 32 I/O pins and 2 dedicated input pins feeding the switch matrix. These signals are distributed to the two PAL blocks for efficient design implementation. There are four clock pins that can also be used as dedicated inputs.

The PAL Blocks

Each PAL block in the MACH111 (Figure 1) contains a 64-product-term logic array, a logic allocator, 16 macrocells, and 16 I/O cells. The switch matrix feeds each PAL block with 26 inputs. This makes the PAL block look effectively like an independent “PALCE26V16.”

There are four additional output enable product terms in each PAL block. For purposes of output enable, the 16 I/O cells are divided into 2 banks of 8 macrocells. Each bank is allocated two of the output enable product terms.

An asynchronous reset product term and an asynchronous preset product term are provided for flip-flop initialization. All flip-flops within the PAL block are initialized together.

The Switch Matrix

The MACH111 switch matrix is fed by the inputs and feedback signals from the PAL blocks. Each PAL block provides 16 internal feedback signals and 16 I/O feedback signals. The switch matrix distributes these signals back to the PAL blocks in an efficient manner that also provides for high performance. The design software automatically configures the switch matrix when fitting a design into the device.

The Product-term Array

The MACH111 product-term array consists of 64 product terms for logic use, and 6 special-purpose product terms. Four of the special-purpose product terms provide programmable output enable; one provides asynchronous reset, and one provides asynchronous preset. Two of the output enable product terms are used for the first eight I/O cells; the other two control the last eight macrocells.

The Logic Allocator

The logic allocator in the MACH111 takes the 64 logic product terms and allocates them to the 16 macrocells as needed. Each macrocell can be driven by up to 12 product terms. The design software automatically configures the logic allocator when fitting the design into the device.

Table 1 illustrates which product term clusters are available to each macrocell within a PAL block. Refer to Figure 1 for cluster and macrocell numbers.

 

 

Table 1.

Logic Allocation

 

 

 

 

 

 

 

 

 

 

Output Macrocell

Available Clusters

 

Output Macrocell

Available Clusters

 

 

 

 

 

 

 

 

 

M0

C0, C1

 

M8

C8, C9

 

 

M1

C0, C1, C2

 

M9

C8, C9, C10

 

 

M2

C1, C2, C3

 

M10

C9, C10, C11

 

 

M3

C2, C3, C4

 

M11

C10, C11, C12

 

 

M4

C3, C4, C5

 

M12

C11, C12, C13

 

 

M5

C4, C5, C6

 

M13

C12, C13, C14

 

 

M6

C5, C6, C7

 

M14

C13, C14, C15

 

 

M7

C6, C7

 

M15

C14, C15

 

 

 

 

 

 

 

 

8

 

MACH111-5/7/10/12/15

 

 

The Macrocell

The MACH111 macrocells can be configured as either registered or combinatorial, with programmable polarity. The macrocell provides internal feedback whether configured as registered or combinatorial. The flip-flops can be configured as D-type or T-type, allowing for product-term optimization.

The flip-flops can individually select one of four clock pins, which are also available as data inputs. The registers are clocked on the LOW-to-HIGH transition of the clock signal. The flip-flops can also be asynchronously initialized with the common asynchronous reset and preset product terms.

The I/O Cell

The I/O cell in the MACH111 consists of a three-state output buffer. The three-state buffer can be configured in one of three ways: always enabled, always disabled, or controlled by a product term. If product term control is chosen, one of two product terms may be used to provide the control. The two product terms that are available are common to eight I/O cells. Within each PAL block, two product terms are available for selection by the first eight three-state outputs; two other product terms are available for selection by the last eight three-state outputs.

SpeedLocking for Guaranteed Fixed Timing

The unique MACH 1 & 2 architecture is designed for high performance—a metric that is met in both raw speed, but even more importantly, guaranteed fixed speed. Using the design of the central switch matrix, the MACH111 product offers the SpeedLocking feature, which allows a stable fixed pin-to-pin delay, independent of logic paths, routing resources and design refits for up to 12 product terms per output. Other non-Vantis CPLDs incur serious timing delays as product terms expand beyond their typical 4 or 5 product-term limits. Speed and SpeedLocking combine for continuous, high performance required in today's demanding designs.

Bus-Friendly Inputs and I/Os

The MACH111 inputs and I/Os include two inverters in series which loop back to the input. This double inversion reinforces the state of the input and pulls the voltage away from the input threshold voltage. Unlike a pull-up, this configuration cannot cause contention on a bus. For an illustration of this configuration, please turn to the Input/Output Equivalent Schematics section.

PCI Compliant

The MACH111-5/7/10/12 is fully compliant with the PCI Local Bus Specification published by the PCI Special Interest Group. The MACH111-5/7/10/12’s predictable timing ensures compliance with the PCI AC specifications independent of the design.

Power-Down Mode

The MACH111 features a programmable low-power mode in which individual signal paths can be programmed as low power. These low-power speed paths will be slightly slower than the non-low-power paths. This feature allows speed critical paths to run at maximum frequency while the rest of the paths operate in the low-power mode, resulting in power savings of up to 50%.

Safe for Mixed Supply Voltage System Designs

The MACH111 is safe for mixed supply voltage system designs. The 5-V device will not overdrive 3.3-V devices above the output voltage of 3.3 V, while it accepts inputs from other 3.3-V devices. Thus, the MACH111 provides easy-to-use mixed-voltage design compatibility.

MACH111-5/7/10/12/15

9

Loading...
+ 19 hidden pages