Amana SBD20S4E, SBD20S4L, SBD20S4W, SBD20TPE, SBD20TPL Owner's Manual

...

0 (0)

Side-by-Side

Refrigerator

Owner’s Manual

English ........................................................................	2
Français....................................................................	19
Sección de castellano ...............................................	39

Keep these instructions for future reference. Be sure this manual stays with refrigerator

Contents

Electrical Requirements

Electrical Requirements ..............................................	2
Model Identification .....................................................	2
Proper Disposal of your Refrigerator ............................	3
Installation Instructions................................................	4
Installation Checklist ...................................................	6
Controls ......................................................................	7
Fresh Food and Deepfreeze®Controls ......................	7
Setting Controls .......................................................	7
Touchmatic™ Electronic Controls (some models) ....	7
Fresh Food Features
Fresh Food Shelves .................................................	8
Chiller Fresh™ System (some models) ....................	9
Garden Fresh™ Crispers .........................................	9
Storage Rack (some models) ...................................	9
Covered Storage Bucket (some models) ................	10
Dairy Center (some models)...................................	10
Snack Chiller (some models) .................................	10
Temperature Controlled Beverage Chiller™
(some models) .......................................................	10
Door Buckets .........................................................	11
Door Shelves ..........................................................	11
Adjustable Divider (Some models) ..........................	11
Deepfreeze®Features
Automatic Ice Maker (some models) ......................	12
Deepfreeze®Rack (some models) ..........................	12
Stor-Mor®System ..................................................	13
Door Dikes (some models) .....................................	13
Tall Package Retainer (some models) ....................	13
Ice ‘N’ Water™ Dispenser
(some models) .......................................................	13
Water Dispenser Operation .................................	13
Ice Dispenser Operation .....................................	14
Removing Ice Bucket ..........................................	14
Dispenser Light (some models) ..........................	14
Taste and Odor ...................................................	14
Care and Cleaning
General ..................................................................	15
Odor Removal ........................................................	15
Adhesives ..............................................................	15
Door Gaskets ........................................................	15
Condenser Coils ....................................................	15
Glass Shelves ........................................................	15
Light Bulbs.............................................................	16
Normal Operating Sounds .........................................	17
Before Calling For Service .........................................	17
Asure™ Service Plan ................................................	18
Energy Tips ...............................................................	18
Vacation Tips ............................................................	18
Warranty (Nonelectronic Models) ..............................	19
Warranty (Electronic Models) ....................................	19

Recognize this symbol as a safety precaution.

WARNING

To prevent electrical shock which can cause severe person injury or death this refrigerator must be properly grounded.

Electrical Grounding Instructions — This refrigerator is equipped with a three-prong (grounding) plug for protection against possible shock hazards. If a twoprong wall receptacle is encountered, contact a qualified electrician and have the two-prong wall receptacle replaced with a properly grounded threeprong wall receptacle in accordance with the National Electrical Code.

Refrigerator is designed to operate on a separate 103 to 126 volt, 15 amp., 60 cycle line.

Do not under any circumstances cut or remove the round grounding prong from the plug. Refrigerator must be grounded at all times. Do not remove warning tag from power cord.

WARNING

Do not use a two-prong adapter. Do not use an extension cord.

Model Identification

Thank you for purchasing this Amana®refrigerator. Please read this Owner's Manual thoroughly. This manual provides proper maintenance information. Any questions, call the Consumer Affairs Department at 1-800-843-0304 inside U.S.A. and 1-319-622-5511 outside U.S.A.

Complete registration card and promptly return. If registration card is missing, call the Consumer Affairs Department. Keep a copy of sales receipt for future reference.

When contacting Amana, provide product information. Product information is on the serial plate, located on (upper left corner, ceiling) of Fresh Food section. Record the following information:

Model Number:

Manufacturing Number:

S/N or Serial Number:

Date of purchase:

Dealer’s name and address:

Amana also has a network of independent authorized technicians. Locate a Factory Service Center or independent authorized Amana technician by calling 1- 800-628-5782 inside U.S.A. and 1-319-622-5511 outside U.S.A. Warranty service must be performed by an authorized Amana technician. Amana also recommends contacting an authorized Amana technician if service is required after warranty expires.

Amana offers a complete line of appliances: cooktops, dishwashers, dryers, freezers, microwave ovens, ranges, wall ovens, and washers. Amana also manufactures a complete selection of high efficiency gas furnaces plus both central and room air conditioners.

Enjoy this new Amana®refrigerator.

Proper Disposal of your Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous—even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.

BEFORE YOU THROW AWAY YOUR OLD

REFRIGERATOR OR FREEZER:

•Take off the doors.

•Leave the shelves in place so that children may not easily climb inside.

Installation Instructions

Proper installation will ensure this refrigerator operates most efficiently. Amana cannot be responsible for improper installation.

1. Remove doors if necessary.

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before removing doors. After replacing doors, connect power.

a.Remove toe grille.

b.Electronic Models

Unplug wiring harness from voltage box.

A. Wiring harness

c.Dispenser Models

Loosen water tube clamp screw. Loosen plastic water tube union nut. Pull water tube away from union nut and through tube clamp.

A.Plastic water tube union nut

B.Water tube clamp screw

C.Water tube

d. Remove top hinge covers. (A below)

WARNING

To avoid electrical shock which can cause severe personal injury or death, green ground wire must remain attached to hinge.

e.Electronic and Dispenser Models

Unplug top hinge wire connectors. Do not remove green ground wire from hinge. Carefully lift and remove top hinges. Do not disturb position of hinge shims. (B)

A		B
			F
C
	D
			G
	E
C.	Hinge cover	F.	Wire connectors
D.	Door hinge screws	G.	Green ground wire

E. Top hinge

f.Remove doors.

Caution

To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs, or other protective material when moving refrigerator.

g.Slide appliance cart under side of refrigerator. Wrap refrigerator with blanket or pad. Thread cart strap around refrigerator and tighten. Do not overtighten strap. Move refrigerator in front of final location.

h.Rehang doors by reversing steps a–f. Use a penny at top of doors to space doors 3/4" (18 mm) from cabinet.

2.Connecting Water Supply

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before connecting water supply. After connecting water supply, connect power.

Caution

To avoid property damage, observe the following:

•Confirm water pressure to water valve is between 20 and 100 pounds per square inch.

•Tighten nut by hand to avoid cross threading. Finish tightening nuts with pliers and wrenches. Do not overtighten.

•Check for water leaks and correct if necessary before returning refrigerator to normal location and 24 hours after connecting.

Important

•Before connecting water supply, contact a plumber to connect copper tubing to household plumbing in compliance with local codes and ordinances.

•A self–piercing or 3/16" saddle valve is not recommended. Both reduce water flow, become clogged with time and may cause leaks if repair is attempted. The correct type of shut off valve requires a 1/4" hole to be drilled in water supply pipe prior to valve attachment. The manufacturer is not responsible for property damage caused by improper water connection.

Materials Required

1/4" (6 mm) flexible copper tubing. Length of copper tubing must reach from water supply connection plus an additional 8' (2 m) for service loop behind refrigerator.

Procedure

1.Remove plastic cap from water valve inlet port. Place brass nut and brass sleeve on copper tubing. Insert copper tubing into water valve inlet port. Connect brass nut on copper tubing to water valve inlet port. Confirm copper tubing is secure by pulling on copper tubing.

	B		C
	B
			D
			E
A.	“P” clamp	B.	Copper tubing
C.	Brass nut	D.	Brass sleeve

E. Water valve inlet connection

2.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

3.Create service loop using extreme care to avoid kinks. Secure copper tubing to refrigerator cabinet with a “P” clamp.

3.Plug in power cord.

4.Move refrigerator into final location.

5.Level refrigerator and align doors.

a.Remove toe grille.

b.Turn roller adjustment screw to raise or lower refrigerator cabinet until refrigerator is stable. Some models have both front and rear adjustable rollers.

c.Models with Hinge Adjusting Cam

If tops of doors are not aligned after leveling, loosen refrigerator door hinge screws 1/2 turn. Turn cam clockwise 1 increment at a time until doors are aligned. Open and close doors. Tighten hinge screws.

A.Rear roller adjustment screw

B.Door hinge screws

C.Hinge adjusting cam

D.Front roller adjustment screw

6.Review “Installation Checklist” in Owner’s Manual with consumer.

Installation Checklist

This checklist is for personal records only.

Consumer Installer

Doors

Doors are aligned with each other. (After food has been added to refrigerator , consumer should check door alignment).

Doors seal completely to refrigerator cabinet.

Handles are solidly attached to doors.

Touchmatic™ Electronic and Ice ‘N Water™ Dispenser Models

If doors were removed to install refrigerator, top hinge wire connectors are reconnected.

Leveling

Refrigerator is stable.

Toe grille is properly attached to refrigerator.

Ice Maker

Water supply to refrigerator is turned on.

Water leaks are not present at connection between household water supply and refrigerator. (After 24 hours, consumer should check connection for water leaks.)

Ice maker arm is in on position for ice production. (It may take up to 24 hours for first harvest of ice.)

Product Literature

Owner's manual is reviewed including the following information.

•product registration card

•Fresh Food and Deepfreeze®controls

•Chiller Fresh™ system

•Garden Fresh™ crispers

•normal operating sounds

Notes

Consumer's Signature

Installer's Signature

Installer's Company Name/Phone Number

Date

Controls

This refrigerator is designed to operate at normal household temperatures of 55° to 110°F (13° to 43°C).

Fresh Food and Deepfreeze® Controls

Fresh Food and Deepfreeze®controls are located on upper rear wall of Fresh Food®section.

A. Deepfreeze control

B. Fresh food control

When Deepfreeze® control is set to off, neither Fresh Food nor Deepfreeze® sections will cool. Initially, set both controls to 4. Wait 24 hours for Fresh Food and Deepfreeze®sections to reach desired temperatures. After 24 hours, adjust controls, one number at a time, as desired. 1 is warmest setting and 7 is coldest.

Setting Controls

Set controls with a household thermometer that includes temperatures between -5° to 50°F (-21° to 10°C).

Put thermometer snugly between frozen packages in Deepfreeze®section. Wait 5-8 hours. If Deepfreeze® temperature is not 0° to 2°F (-17° to -16°C), adjust control, 1 number at a time. Check again after 5-8 hours.

Put thermometer in a glass of water in middle of Fresh Food section. Wait 5-8 hours. If Fresh Food temperature is not 38° to 40°F (3° to 4°C), adjust control, 1 number at a time. Check again after 5-8 hours.

Touchmatic™ Electronic Controls (some models)

Locate power switch on right side of black box in center of cabinet behind toe grille. Turn power switch on before programming.

Touchmatic™ electronic controls are located on refrigerator between door handles. Press * pad to activate control panel. All other pads, except for ALARM OFF pad, remain inactive until * pad is pressed. Once activated, pads remain programmable for at least 10 minutes.

Fresh Food and Deepfreeze®controls are preset at 5. Wait 24 hours after connecting power for Fresh Food and Deepfreeze® sections to reach desired temperatures. After 24 hours, adjust controls as desired. 1 is warmest setting and 9 is coldest. Refer to “Setting Controls” section to set controls precisely.

•Adjust Fresh Food or Deepfreeze® temperatures by pressing * pad then

REFRIG TEMP pad or FREEZER TEMP pad. Press WARMER pad or COLDER pad to adjust temperature setting 1 level at a time. Holding down WARMER pad or COLDER pad adjusts temperature more than 1 level at a time.

Entry Tone

Entry tone indicates a pad was pressed and command was read and accepted.

•Deactivate entry tone by pressing and holding * pad for 3 to 5 seconds. Three short beeps indicate instructions were accepted.

•Activate entry tone by pressing and holding * pad for 3 to 5 seconds.

Vacation Mode

Vacation mode defrosts refrigerator less often during extended non-use periods.

•Activate vacation mode by pressing * pad then VACATION pad. Indicator light will glow.

•Deactivate vacation mode by pressing * pad then VACATION pad. Opening Fresh Food or Deepfreeze®door will also deactivate vacation mode.

Max Cool Mode

Max cool mode adjusts Fresh Food temperature to coldest setting. After 10 hours, Fresh Food temperature automatically returns to previous setting.

•Activate max cool mode by pressing * pad then MAX COOL pad. Indicator light will glow.

•Deactivate max cool mode before automatic reset by pressing * pad then

MAX COOL pad.

Fast Freeze Mode

Fast freeze mode adjusts Deepfreeze® temperature to coldest setting. After 24 hours, Deepfreeze®temperature automatically returns to previous setting.

FREEZER

TEMP

REFRIG

TEMP

WARMER

COLDER

FRZR

TEMP

REF

TEMP

DOOR

OPEN

HIGH

TEMP

CLEAN

COIL

VACA-

TION

MAX

COOL

FAST

FRZ

VACATION

MAX COOL

FAST

FREEZE

ALARM

OFF

DISPLAY

OFF

Fresh Food Features

•Activate fast freeze mode by pressing * pad then FAST FREEZE pad. Indicator light will glow.

•Deactivate fast freeze mode before automatic reset by pressing * pad then FAST FREEZE pad.

Door Open Alarm

Door open alarm sounds and indicator light blinks if either door is open for more than 3 minutes.

•Deactivate door open alarm by pressing ALARM OFF pad or by closing either door.

•Activate door open alarm by pressing * pad then holding ALARM OFF pad for 3 to 5 seconds. Three short beeps indicate instructions were accepted.

High Temperature Alarm

High temperature alarm sounds and indicator light glows if Fresh Food or Deepfreeze®temperature is high for 2 hours. A blinking light signals affected compartment. Alarm ends when proper temperature is reached.

•Deactivate high temperature alarm by pressing

ALARM OFF pad.

Thermistor Alarm

Thermistor electronically senses Fresh Food and Deepfreeze®temperatures. Thermistor alarm sounds and indicator lights scroll if Fresh Food or Deepfreeze® thermistor is not operating properly.

•Deactivate display by pressing ALARM OFF pad.

If thermistor alarm sounds, contact an authorized Amana® technician immediately.

If ALARM OFF pad is pressed, thermistor control retests to confirm situation has been corrected. Alarm sounds again if thermistor is still not operating properly.

Display Lights

•Deactivate temperature display lights by pressing * pad then pressing DISPLAY OFF pad.

•Activate temperature display lights by pressing any of top 5 pads.

Clean Condenser Coil Light

Clean condenser coil light glows every 3 months as a reminder to clean condenser coils. Light automatically cancels in 72 hours.

•Deactivate clean condenser coil light before automatic reset by pressing ALARM OFF pad.

Caution

To avoid property damage, confirm shelf is secure before placing items on shelf.

Fresh Food Shelves

Models feature either glass or wire shelves. Shelves adjust up or down to meet individual storage needs. Some models feature Spillsaver™ shelves. Spillsaver™ shelves hold simple spills for easier cleaning.

Caution

To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.

•Remove shelves by lifting front, releasing hooks from metal track then pulling out.

•Replace shelves by inserting hooks into metal track and lowering front.

EasyGlide™ shelves pull forward for easy access of items in back.

Chiller Fresh™ System (some models)

Chiller Fresh™ system features a drawer inside a sleeve. Air circulates between drawer and sleeve. This systems keeps food fresh longer and up to 5°F (3°C) colder than Fresh Food temperature.

Chiller Fresh™ control is located below front shelf trim. Control adjusts amount of air circulating around drawer. Slide control to cold for normal Fresh Food temperature and to coldest for colder temperature. Ice crystals may form on drawer or food on coldest setting. Cold air can decrease Fresh Food temperature. Fresh Food control may need to be adjusted.

•Remove drawer by lifting and pulling out. Remove shelf by lifting front, releasing hooks from metal track then pulling out.

•Replace shelf by inserting hooks into metal track and lowering front. Use slots 8 through 11 only. Replace drawer by sliding in. Confirm boot is over air inlet in side wall.

Garden Fresh™ Crispers

Garden Fresh™ crispers keep produce fresh longer. Wrap produce tightly. Do not wash produce before placing in crispers. Excess moisture could cause produce to spoil prematurely. Do not line crispers with paper towels. Paper towels will retain moisture.

Garden Fresh™ control is located below front shelf trim. Control adjusts humidity in crispers. Slide control to high for produce with leaves such as lettuce, spinach or cabbage. Slide control to low for produce with skins such as cauliflower, corn or tomatoes.

Caution

To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.

Remove shelf and garden fresh crispers by completing the following steps.

1.Open crisper.

2.Remove shelf by gently pushing up from underneath. Tilt one end up then pull out.

3.Remove crisper by lifting front while supporting underneath then pulling out.

4.Replace crispers and shelf by reversing steps 1-3.

Storage Rack (some models)

Storage rack provides convenient storage for items such as a large bottle, eggs, etc.

Depending on location of shelf, hang rack using 1 of the following methods. Rack cannot be installed next to lower Fresh Food section light bulb.

•Remove shelf by lifting front, releasing hooks from metal track then pulling out. Hang rack by inserting tabs into slots on side of shelf. Replace shelf by inserting hooks into metal track and lowering front.

•Slide rack along side of shelf until tabs are inserted into slots.

Amana SBD20S4E, SBD20S4L, SBD20S4W, SBD20TPE, SBD20TPL Owner's Manual

A. Storage rack

Covered Storage Bucket (some models)

Storage bucket has a lid and removable egg tray. When tray is removed, bucket will accept items such as a standard egg carton, ice, etc.

	A
	B
	C
A.	Lid	B. Egg tray
C.	Storage bucket

Dairy Center (some models)

Dairy center provides convenient storage for items such as butter, cheese, etc.

Snack Chiller (some models)

Snack chiller provides convenient storage for small items and snacks. Items are kept cooler with air circulating from Temperature Controlled Beverage Chiller™ .

Temperature Controlled Beverage Chiller™

(some models)

Temperature Controlled Beverage Chiller™ keeps beverages up to 5°F (3°C) colder than Fresh Food section. Air inlet allows air from Deepfreeze® section to pass to beverage chiller. Air inlet is located on interior wall of Fresh Food door.

Beverage chiller control is located on left front wall of Fresh Food section. Control adjusts amount of air circulating in beverage chiller. Turn control to cold for normal Fresh Food temperature and to colder for colder temperature.

A. Fresh food section B. Temperature control

•Remove beverage chiller door by removing lower door buckets. Remove door buckets by pushing tabs toward center and pulling out. Slide door down and out through bottom of door track.

•Replace beverage chiller door by sliding door up through bottom of door track. Retention glides must remain in place to replace door. Replace door buckets by sliding in until tabs lock into place.

A. Door track

B. Beverage chiller door

Door Buckets

Door buckets adjust to meet individual storage needs.

•Remove door buckets by pushing tabs toward center and pulling out.

•Replace door buckets by sliding in until tabs lock into place.

A. Shelf glide

•Remove hook-style door shelves by lifting ends and releasing hooks on bottom of shelf.

•Replace hook-style shelves by inserting hooks and lowering bottom of shelf. Push down on ends.

A. Tabs

Door Shelves

•Remove slide-style door shelves by lifting ends up and pulling out.

•Replace slide-style door shelves by placing shelf on glides and sliding down.

Caution

To avoid property damage, confirm shelf is secure before replacing items on shelf.

Adjustable Divider (Some models)

Adjustable divider keeps items in place and adjusts to meet individual storage needs. Divider fits in any door bucket or door shelf.

A. Adjustable divider

Deepfreeze® Features

Caution

To avoid property damage, confirm shelf is secure before replacing items on shelf.

Automatic Ice Maker (some models)

•Confirm ice bucket is in place and ice maker arm is down.

A. Off position

B. On position

•After Deepfreeze®section reaches normal temperature, ice maker fills with water and begins operating. Allow 24-48 hours after installation before first harvest of ice. Ice maker produces 7 to 9 harvests of ice in a 24-hour period under ideal conditions.

•After ice is formed, ice maker drops ice cubes into ice storage bucket. During ice production, ice maker arm raises and lowers. When ice storage bucket is full, ice maker arm turns ice maker off. Discard first 3 harvests of ice after initially connecting refrigerator to household water supply and after extended periods of non-use.

•Stop ice production by raising ice maker arm. A definite click is heard when proper position is reached. Ice maker arm will remain in off position until pushed down.

Caution

To avoid damage to ice maker, observe the following:

•Do not force ice maker arm down or up.

•Do not place or store anything in ice storage bucket.

Deepfreeze® Rack (some models)

Deepfreeze®rack holds ice cube trays and provides additional storage.

•Remove Deepfreeze®rack by lifting rack and pushing front hooks in to release hooks from shelf. Pull front of rack down. Push hooks in to release back hooks from shelf. Slide rack off shelf.

•Replace Deepfreeze®rack by pushing back hooks in and placing hooks over shelf. Push front hooks in and place hooks over shelf.

A. Freezer shelf

B. Deepfreeze®

Stor-Mor® System

Wire shelves and baskets slide out for easy access of items in back and can be rearranged to meet individual storage needs.

•Remove shelves and baskets by lifting and pulling out.

•Replace shelves and baskets by placing shelves and baskets on side rails. Slide shelves and baskets right and back until round knob is behind stop on rail.

A. Wire shelve

B. Wire baskets

Door Dikes (some models)

Door dikes snap out for easy removal of Deepfreeze® shelves and baskets.

•Remove door dike by pulling out.

•Replace door dike by aligning dike with extrusions on Deepfreeze® door. Push until dike snaps in place.

A. Door dike

B. Door dike

Tall Package Retainer (some models)

Tall package retainer keeps tall items secure. Retainer fits in any door bucket or door shelf.

Ice ‘N’ Water™ Dispenser

(some models)

Caution

To avoid personal injury or property damage, observe following instructions:

•Do not operate dispenser with Deepfreeze®door open.

•Do not put fingers, hands, or any foreign object into dispenser opening.

•Do not use sharp objects to break ice.

Water Dispenser Operation

It takes approximately 1 minute after initially pressing dispenser bar before water dispenses after initial connection of water supply. Discard first 10 to 14 containers of water after initially connecting refrigerator to household water supply and after extended periods of non-use.

•Dispense water by pressing sturdy wide mouthed container against water dispenser bar.

•Stop water dispensing by releasing pressure on bar. A small amount of water may continue to fall. Spill shelf is not self-draining. Large spills should be wiped dry.

Ice Dispenser Operation

Caution

To avoid property damage, do not dispense ice directly into thin glass, fine china, or delicate crystal.

•Select cubed or crushed mode by sliding lever on dispenser panel. Dispense ice by pressing wide mouthed container against ice dispenser bar.

Important

Reduce spraying of crushed ice by holding wide mouthed container directly under ice chute and as high as possible in dispenser area.

•Stop ice dispensing by releasing pressure on bar before container is full. Some ice will continue to fall. Do not remove container until last of ice falls.

If dispensing ice continuously, dispenser motor is designed to shut off after 3 to 5 minutes. Motor resets after 3 minutes and dispensing can continue.

A slight delay occurs when switching between cubed and crushed modes. Pieces of crushed ice will vary in size and shape. "Snow" may form on door and ice chute when repeatedly dispensing crushed ice. Allow "snow" to evaporate or wipe dry.

Dispenser operates only with cubes of proper size and crescent shape. Do not add purchased ice cubes or other shaped cubes to ice bucket.

Removing Ice Bucket

•Remove ice bucket by lifting bucket and pulling out.

•Replace ice bucket by sliding in until bucket locks in place. Ice bucket must be locked in place for proper ice dispensing. If Deepfreeze®door does not close, bucket is not in proper location.

Dispenser Light (some models)

A light is activated when dispensing ice or water. Some models feature a night light.

•Activate night light by pushing switch, located underneath dispenser and left of ice dispenser bar.

A. Night light switch

Taste and Odor

Observe the following to minimize taste and odor difficulties:

•Wrap foods in tightly sealed containers or moisture proof bags.

•Install water filter, part #R0185011 on water line.

•Contact local water treatment company for specialized help if difficulties persist.

Care and Cleaning

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before cleaning. After cleaning, connect power.

Caution

To avoid personal injury or property damage, read and follow all cleaning product manufacturer's directions.

General

Adhesives

1.Remove glue residue by rubbing toothpaste into adhesive with fingers until adhesive loosens.

2.Rinse surface with warm water. Dry surface with a soft, clean cloth.

Door Gaskets

1.Clean door gaskets every 3 months according to “General” instructions.

2.Apply a light film of petroleum jelly to keep gaskets pliable.

Condenser Coils

Clean condenser coil every 3 months to ensure maximum performance of refrigerator. Accumulated dust and lint may cause the following:

1.Wash surfaces with 4 tablespoons baking soda dissolved in 1 quart warm water and a soft, clean cloth.

2.Rinse surfaces with warm water. Dry surfaces with a soft, clean cloth.

•Do not use the following items:

-abrasive or harsh cleaners, ammonia, chlorine bleach, etc.

-concentrated detergents or solvents

-metal scouring pads

These items can scratch, crack and discolor surfaces.

• Do not place buckets, shelves, etc. in dishwasher.

Odor Removal

1.Remove all food and disconnect power to refrigerator.

2.Clean all interior surfaces including ceiling, floor, and walls according to “General” instructions. Pay special attention to corners, crevices, and grooves. Include all drawers, shelves, and gaskets.

3.Connect power to refrigerator and return food to refrigerator. Wash and dry all bottles, containers and jars. Wrap foods in tightly sealed containers to prevent further odor. After 24 hours, check if odor was eliminated.

Complete the following steps if odor was not eliminated.

4.Complete steps 1–2.

5.Place garden fresh crispers on top shelf of Fresh Food section. Pack Fresh Food and Deepfreeze® sections including doors with crumpled sheets of black and white newspaper.

6.Place charcoal briquettes randomly throughout newspaper.

7.Close doors and let stand 24–48 hours.

8.Remove charcoal briquettes and newspapers.

9.Complete steps 2–3.

Contact Consumer Affairs Department if odor was still not eliminated. Refer to Model Identification section for phone number.

•reduced cooling performance

•increased energy usage

•premature compressor failure

1.Remove toe grille by holding ends and pulling forward.

2.Clean front surface of condenser coil with a vacuum cleaner hose nozzle.

3.Replace toe grille by inserting clips in holes and snapping in.

Caution

To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.

4.Pull refrigerator away from wall. Run a vacuum brush across condenser fan outlet grille on back of refrigerator.

Glass Shelves

Caution

To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.

Remove shelf by lifting front, releasing hooks from metal track then pulling out. Place shelf on a towel. Allow shelf to adjust to room temperature before cleaning.

Clean crevices by completing the following steps:

1.Dilute mild detergent and brush solution into crevices using a plastic bristle brush. Let set for 5 minutes.

2.Spray warm water into crevices using faucet spray attachment.

3.Dry shelf thoroughly and replace shelf by inserting hooks into metal track and lowering front.

Light Bulbs

WARNING

To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before replacing light bulb. After replacing light bulb, connect power.

Caution

To avoid personal injury or property damage, observe the following:

•Allow light bulb to cool.

•Wear gloves when replacing light bulb.

Upper Fresh Food Section

•Remove light bulb cover by removing ¼" hex nut screws. Replace bulb(s) with 40-watt appliance bulb(s).

•Replace light bulb cover by replacing ¼" hex nut screws.

A. Light bulb cover

B. Light bulbs

Lower Fresh Food Section (Some models)

•Remove light bulb cover by removing screw. Replace bulb with 40-watt tubular bulb.

•Replace light bulb cover by placing cover over light bulb. Insert and tighten screw.

A.	Light bulb	B. Light bulb cover
C.	Screw

Deepfreeze® Section

1.Remove ice bucket by lifting bucket and pulling out.

2.Remove light bulb cover by removing screw. Replace bulb with 40-watt appliance bulb.

3.Replace light bulb cover by holding cover in place over light bulb. Insert and tighten screw.

4.Replace ice bucket by sliding in until bucket locks in place.

A. Light bulb cover B. Light bulb

Ice ‘N’ Water™ Dispenser (Some models)

Light bulb is located between dispenser arms.

•Remove light bulb by unscrewing light bulb. Replace light bulb with a 6-watt, 120-volt bulb.

•Replace light bulb by inserting and tightening bulb.

Normal Operating Sounds

Before Calling For Service

This new refrigerator may be replacing a differently designed, less efficient or smaller refrigerator. Today’s refrigerators have new features and are more energy efficient. As a result, certain sounds may be unfamiliar. These sounds are normal and will soon become familiar. These sounds also indicate refrigerator is operating and performing as designed.

1.Deepfreeze® control clicks when starting or stopping compressor.

2.Deepfreeze® fan air rushes and whirs.

3.Sealed system (evaporator and heat exchanger) refrigerant flow gurgles, pops or sounds like boiling water.

4.Defrost heater sizzles, hisses or pops.

5.Condenser fan air rushes and whirs.

6.Compressor has a high pitched hum or pulsating sound.

7.Ice cubes from ice maker (some models) drop into ice bucket.

Ice auger (Ice ‘N’ Water™ Dispenser models) hums as auger agitates ice during dispensing. Ice auger is located in freezer door. (not shown)

Ice maker water valve hookup (some models) buzzes when ice maker fills with water. This occurs whether or not refrigerator is connected to water supply. If refrigerator is not connected to water supply, stop sound by raising ice maker arm to off position. Water valve hook up is located in back, bottom, left hand corner. (not shown)

Foam insulation is very energy efficient and has excellent insulating capabilities. However, foam insulation is not as sound absorbent as previously used fiberglass insulation. (not shown)

7	1

Refrigerator does not operate.

•Confirm Deepfreeze®control is on.

•Confirm refrigerator is plugged in.

•Check fuse or circuit breaker. Plug in another item at that wall outlet.

•Wait 40 minutes to see if refrigerator restarts. If Deepfreeze® control is on, lights work but 2 fans and compressor are not operating, refrigerator may be in defrost cycle.

Refrigerator still won’t operate.

•Unplug refrigerator. Transfer food to another unit or place dry ice in Deepfreeze® section to preserve food. Warranty does not cover food loss. Check warranty certificate for specific coverage.

•Call 1-800-628-5782 inside U.S.A. and 1-319-622-5511 outside U.S.A. to locate an authorized Amana technician.

Food temperature appears too warm.

•See above sections.

•Allow time for recently added warm food to reach Fresh Food or Deepfreeze®temperature.

•Check gaskets for proper seal.

•Clean condenser coils.

•Adjust Fresh Food and/or Deepfreeze®control.

•Confirm rear air grille is not blocked. Rear air grille is located behind left garden fresh crisper.

Chiller fresh system temperature is too warm.

•Slide control to colder setting.

•Adjust Deepfreeze® control to colder setting.

Food temperature is too cold.

•Clean condenser coils.

•Adjust Fresh Food control.

•Adjust Deepfreeze® control to warmer setting. Allow several hours for temperature to adjust.

Refrigerator runs too frequently.

•It may be normal to maintain constant temperature.

•Doors may have been opened frequently or for an extended period of time.

•Allow time for recently added warm food to reach Fresh Food or Deepfreeze®temperature.

•Clean condenser coils.

•Adjust Deepfreeze®control.

•Check gaskets for proper seal.

Water droplets form on inside of refrigerator.

•It is normal during high humidity periods or if doors have been opened frequently.

Water droplets form on outside of refrigerator.

• Check door gaskets for proper seal.

Asure™ Service Plan

Garden Fresh™ crispers or Chiller Fresh™ system does not close freely.

•Check for a package which may prevent drawer from closing properly.

•Confirm drawer is in proper position.

•Clean drawer channels with warm, soapy water. Rinse and dry thoroughly.

•Apply a thin layer of petroleum jelly to drawer channels.

•Confirm refrigerator is level.

Refrigerator has an odor.

•See “Odor Removal” instructions in “Care and Cleaning” section.

Refrigerator or ice maker make unfamiliar sounds or seems too loud.

•It may be normal. See “Normal Operating Sounds” section.

Ice maker is not producing ice.

•Confirm ice maker arm is down.

•Confirm household water supply is reaching water valve.

•Confirm ice maker wiring harness is completely inserted into proper holes.

•Check for kinks in copper or plastic tubing. Remove kinks or replace tubing.

•Check electrical connections to water valve coiland connector block on refrigerator cabinet.

•Confirm Deepfreeze®section is operating at proper temperature.

Ice cubes have an odor.

•See “Odor Removal” instructions in “Care and Cleaning” section.

•Discard ice and clean ice bucket or trays more frequently. Ice cubes are porous and absorb odors easily.

Ice cubes stick together or ‘shrink’.

•Empty ice cube bucket or trays more frequently.

If used infrequently, ice cubes may stick together or shrink.

Ice forms in inlet tube to ice maker.

•Check water pressure. Low water pressure will cause valve to leak. Self-piercing valves cause low

water pressure. Amana recommends using copper tubing to connect household plumbing to refrigerator. Do not use self-piercing valve. Amana is not responsible for property damage due to improper installation or water connection.

Amana is pleased to offer long-term service protection on this new refrigerator. Asure™ Extended Service Plan is specially designed to supplement Amana's strong warranty. Asure™ provides budget-protecting coverage on refrigerator that includes parts, labor and travel charges. A participating Amana dealer has details, or call Asure™ department at 1/800-528-2682.

Energy Tips

This refrigerator is designed to be one of the most energy efficient refrigerators available. Reduce energy use by observing the following.

•Operate in normal household temperatures of 55° to 110°F (13° to 43°C) away from heat sources and direct sunlight.

•Set Fresh Food, Deepfreeze®, and Chiller Fresh™ system controls no colder than necessary.

•Keep Deepfreeze®section full.

•Keep door gaskets clean and pliable. Replace gaskets if worn.

•Keep condenser coils clean.

Vacation Tips

Complete the following steps for short vacations.

1.Remove perishable foods. Warranty does not cover food loss. Check warranty certificate for specific coverage.

2.If an ice maker is installed, move ice maker arm up, to off position.

Complete the following steps for long vacations.

1.Empty Fresh Food and Deepfreeze®sections.

2.Unplug refrigerator.

3.Clean refrigerator and door gaskets according to “General” instructions in “Care and Cleaning” section.

4.Prop doors open, so air can circulate inside.

5.If an ice maker is installed, turn water supply to refrigerator off and move ice maker arm up, to off position.

Warranty (Electronic Models)

Full One Year Warranty

Full Five Year Warranty on Sealed System Components and Food Compartment Liner

Limited Five Year Warranty on Electronic Control Components Limited Ten Year Warranty on Sealed System Components First Year

Amana will repair or replace, free of charge, any part which is defective due to workmanship or materials.

Second through Fifth Year

Amana will replace, free of charge, any sealed system component (compressor, condenser, evaporator and interconnecting tubing) and repair any food compartment liner (exclusive of door liner) which is defective due to workmanship or materials.

Second through Fifth Year

Amana will provide a free replacement part, f.o.b. Amana, Iowa, for any electronic control component (high voltage and low voltage P.C. boards, upper trim keyboard assembly) which is defective due to workmanship or materials.

Sixth through Tenth Years

Amana will provide a replacement part f.o.b. Amana, Iowa, for any sealed system component (compressor, condenser, evaporator, and interconnecting tubing), which is defective due to workmanship or materials.

Warranty Limitations

•Begins at date of original purchase.

•Applies to product used within the United States or in Canada if product has Canadian Standards Association listing when

Shipped from the factory.

•Service must be performed by an authorized Amana technician.

Warranty Is Void If

•Serial plate is defaced.

•Product is used on a commercial, rental or leased basis.

•Product has defect or damage due to product accident, alteration, connection to an improperelectrical supply, fire, flood, lightning, shipping and handling, or other conditions beyond the control of Amana.

•Product is improperly installed or used.

Owner's Responsibilities

•Provide proof of purchase (sales receipt).

•Provide normal care and maintenance. Replace owner replaceable items where directions appear in Owner's Manual.

•Make product reasonably accessible for service.

•Pay premium service costs for service outside technician's normal business hours.

•Pay for service calls related to product installation and usage.

In no event shall Amana be liable for incidental or consequential damages including food loss*

*This warranty gives you specific legal rights and you may have others which vary from state to state. For example, some states do not allow the exclusion or limitation of incidental or consequential damages so this exclusion may not apply to you.

Warranty (Nonelectronic Models)

Full One Year Warranty

Full Five Year Warranty on Sealed System Components and Food Compartment Liner Limited Ten Year Warranty on Sealed System Components

First Year

Amana will repair or replace, free of charge, any part which is defective due to workmanship or materials.

Second through Fifth Year

Sixth through Tenth Year

Warranty Limitations

•Begins at date of original purchase.

•Applies to product used within the United States or in Canada if product has Canadian Standards Association listing when shipped from the factory.

•Service must be performed by an authorized Amana technician.

Warranty Is Void If

•Serial plate is defaced.

•Product is used on a commercial, rental or leased basis.

•Product has defect or damage due to product accident, alteration, connection to an improper electrical supply, fire, flood, lightning, shipping and handling, or other conditions beyond the control of

Amana.

•Product is improperly installed or used.

Owner's Responsibilities

•Provide proof of purchase (sales receipt).

•Provide normal care and maintenance. Replace owner replaceable items where directions appear in Owner's Manual.

•Make product reasonably accessible for service.

•Pay premium service costs for service outside technician's normal business hours.

•Pay for service calls related to product installation and usage.

In no event shall Amana be liable for incidental or consequential damages including food loss*

+ 44 hidden pages