|
Electric Dryer |
|
PRODUCT MODEL NUMBERS |
|
NED4600Y, NED4700Y, NED4655E, NED4705E |
Installation clearances: |
Minimum spacing for recessed area or closet installation |
The location must be large enough to allow the dryer door to |
|
open fully. |
|
Dryer Dimensions |
Minimum Required Spacing |
|
|
|
|
|
|
3"* |
|
|
|
|
14"max.* |
48 in.2* |
(76 mm) |
|
|
|
|
(356 mm) |
|
|
18"* |
|
|
|
(310 cm )2 |
|
|
(457 mm) |
|
|
|
|
|
|
|
|
|
|
|
24 in.2 * |
3"* |
|
|
|
|
|
(155 cm )2 |
(76 mm) |
1" |
29" |
1" |
1"* |
27¾" |
|
|
(25 mm) |
(737 mm) |
(25 mm) (25mm) (705 mm) |
|
|
A B C
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
*Additional spacing recommended
*Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.”
Installation spacing for recessed area or closet installation
The dimensions shown following are for the minimum spacing allowed.
■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings.
■■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation opening are acceptable.
■■ Companion appliance spacing should also be considered.
W10514172A
02/2015