Altec Lansing VS2220 User Manual

VS2220	User’s guide	Guía del usuario
	Mode d’emploi	Guia do Usuário

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CONNECTING THE POWER CORD (AC WALL SOCKET)

Long slot is neutral (ground) side.

Insert the wide blade into the ground side slot.

15.Lightning Storms — Unplug the apparatus during lightining storms.

16.Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

17.Accessories — Only use attachment accessories specified by Altec Lansing Technologies, Inc.

18.Damage Requiring Service — The appliance should be serviced by qualified service personnel when:

•The power-supply cord or the plug has been damaged.

•Objects have fallen, or liquid has been spilled into the appliance.

•The appliance has been exposed to rain.

•The appliance does not appear to operate normally or exhibits a marked change in performance.

•The appliance has been dropped or the enclosure damaged.

19.Servicing — The user should not attempt to service the appliance. Servicing should be referred to qualified service personnel or returned to the dealer or call the Altec Lansing service line for assistance.

ONE-YEAR LIMITED WARRANTY

Altec Lansing Technologies, Inc. warrants to the end user that all of its powered audio, PC audio, portable audio, TV or gaming speaker systems are free from defects in material and workmanship in the course of normal and reasonable use for a term of one year from the date of purchase.

IMPORTANT SAFETY INSTRUCTIONS

1.Read Instructions — All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions — The operating instructions should be retained for future reference.

3.Heed Warning — All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions — All operating and use instructions should be followed.

5.Water and Moisture — The appliance should not be used near water — for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. It should not be exposed to dripping or splashing water, and no object filled with liquid, such as a vase, should be placed on the appliance.

6.Outdoor Use — Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

7.Location — The appliance should be installed in a stable location.

8.Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources — The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

12.Grounding or Polarization — The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.

13.Cleaning — The appliance should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzene, insecticides or other volatile liquids since they may corrode the cabinet.

14.Non-Use Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

This warranty is the exclusive and only warranty in effect relative to Altec Lansing powered audio, PC audio, portable audio, TV or gaming speaker systems and

any other warranties, either expressed or implied, are invalid. Neither Altec Lansing Technologies, Inc. nor any authorized Altec Lansing Technologies, Inc. reseller is responsible for any incidental damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not applicable where prohibited.)

Altec Lansing Technologies, Inc.’s obligation under this warranty does not apply to any defect, malfunction or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment or the use of the speaker systems with any equipment for which they were not intended.

The terms of this warranty apply only to powered audio, PC audio, portable audio, TV or gaming speaker systems when such speakers are returned to the respective authorized Altec Lansing Technologies, Inc. reseller where they were purchased.

CUSTOMER SERVICE

The answers to most setup and performance questions can be found in the Troubleshooting guide. You can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you still can’t find the information you need, please call our customer service team for assistance before returning the speakers to your retailer under their return policy.

1-800-ALTEC-88 (1-800-258-3288)

Email: [e-mail]

For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.

© 2003 Altec Lansing Technologies, Inc.

Designed and engineered in the USA and manufactured in our ISO9002 certified factory. United States Patents 4429181 and 4625328 plus other patents pending.

INTERNATIONAL DISTRIBUTION

International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on “International.”

1

VS2220

TWO-PIECE POWERED AUDIO SYSTEM

Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of desktop environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

BOX CONTENTS

•Two speakers

•Color-coded cables

•User’s guide

•Quick connect instructions (located on inner-flap of the package)

PLACING SPEAKERS

SATELLITE SPEAKERS

Arrange the satellite speakers to suit your listening tastes — from right next to the monitor to as far apart as the speaker cords allow.

For optimum sound, satellite speakers should be placed in a left/right configuration, preferably apart and at equal distance from the center of the listening area. This will offer the best stereo imaging and provide the most satisfying results.

Note: The satellite speakers ARE magnetically shielded and can be placed close to video displays such as TVs and computer monitors without distorting the image.

MAKING CONNECTIONS

Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the lime green input labeled “FRONT” on your sound card.

CONSOLE GAMING

(Requires the use of the Console Gaming Y-Adapter, which is not included. This adapter can be purchased at www.alteclansing.com.)

Most console game systems feature dual-RCA outputs. To connect your speakers, follow the steps below:

1.Make sure the power to your console gaming system is turned off.

2.The Console Gaming Y-Adapter has a lime green 3.5 mm stereo jack on one end and two RCA jacks on the other — one red and one white.

3.Locate the red and white RCA plugs on the end of the cable connected to the back of your console gaming system. Connect them to the matching red and white RCA jacks on the Console Gaming Y-Adapter.

4.Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the lime green input on the Console Gaming Y-Adapter.

PORTABLE AUDIO DEVICES (MP3, PORTABLE CD PLAYERS, ETC.)

Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the headphone jack on your portable audio device.

POWERING ON

1.After all other connections are made, plug the AC power cord into a wall outlet. The speaker system is now ready to operate.

2.Turn on the audio source.

3.Turn on the speaker system by turning the master volume knob on the right satellite until you hear a click sound. An LED will light on the front of the right satellite when the power is ON.

Note: To avoid hearing a popping sound when you turn on your Altec Lansing speaker system, always turn on your audio source first.

VOLUME

Warning: Do not insert the speaker system’s power plug into a wall outlet until all connections are made. Also, turn off audio source (i.e., your PC, MP3 player, Sony PlayStation, etc.) before connecting the outputs to the speaker system’s inputs.

To ensure first-time operation as expected, please carefully follow the connection sequences described below in the order indicated.

INPUTS

Various connection schemes between your audio source and the speaker system are available. Determine if you’ll be setting up the speaker system for PC audio/PC gaming, DVD playback, console gaming or with portable audio devices (such as MP3 or portable CD players), then skip to the appropriate section.

PC AUDIO/PC GAMING/DVD PLAYBACK

All PC sound cards have audio outputs. Typically, the outputs will be marked as “front output” and “rear output.” In some cases, slightly different terminology may be used. The sound card’s documentation should help you determine which outputs to use with your speaker system.

SYSTEM SPECIFICATIONS*

The VOLUME knob on the right satellite controls the master volume. Turn the knob clockwise to increase the volume and counterclockwise to decrease the volume.

TONE CONTROL

The second knob on the right satellite controls tone. Turn the knob clockwise to increase treble and counterclockwise to decrease treble.

HEADPHONES

To use headphones with the system, plug them into the labeled jack on the right satellite. When headphones are connected, the speaker system is muted.

Altec Lansing’s superior sound comes from our patented Dynamic EQ technology, which utilizes custom-built, high-fidelity drivers, state-of-the-art equalization circuitry, and a harmonious mix of the following specifications:

Sound Pressure Level (SPL):		89 dB		Frequency Response:	85 Hz – 18 kHz (-10 dB)
Total Continuous Power:		5 Watts RMS		Signal to Noise Ratio
				@ 1 kHz input:	> 70 dB
	• Front Speakers:	2.5 Watts/channel @ 4 ohms
		@ 10% THD @ 20 Hz – 20 kHz (-3dB)		Drivers (per satellite):	One 3" full-range driver
		2 Channels Loaded

*Power rating conforms to FTC Amplifier Rule #16 C.F.R. Part 432.

2

TROUBLESHOOTING

	SYMPTOM	POSSIBLE PROBLEM	SOLUTION
	No LEDs are lit.	Power isn’t turned on.	Turn the VOLUME knob on the right speaker until you hear a click sound. An
			LED will light next to the knob when the power is ON.
		AC power cord isn’t connected to the wall outlet.	Check to see if the “Power On” LED is illuminated on the right satellite. If not,
			connect the AC power cord.
		Surge protector (if used) isn’t powered on.	If the AC power cord is plugged into a surge protector, make sure the surge
			protector is switched on.
		Wall outlet not functioning.	Plug another device into the wall outlet (same jack) to verify the wall outlet
			is working.
	No sound	Power isn’t turned on.	Verify the AC power cord is plugged into the wall outlet.
	from one or
			Turn the VOLUME knob on the right speaker until you hear a click sound. An
	more speakers.
			LED will light next to the knob when the power is ON.
		Volume is set too low.	Turn the VOLUME knob clockwise to raise the volume.
			Check volume level on the computer sound card or alternate audio source
			device, and set at mid-level.
		3.5mm stereo cable isn’t connected to audio source.	Check plug connections on the audio source. Make sure the signal cables are
			inserted firmly into the correct jacks.
		3.5mm stereo cable is connected to wrong output on	Make sure the 3.5mm stereo cable is connected and fully inserted into the
		audio source.	“line-out,” “audio-out,” or the headphone jack of the audio source.
		Problem with audio source device.	Test the speakers on another audio device. Remove the 3.5mm stereo cable
			from the audio source device and connect it to “line-out,” “audio-out,” or the
			headphone jack of another audio source.
	Crackling sound	Bad connection.	Check all cables. Make sure they are connected to “line-out” or “audio-out”
	from speakers.		jack on your sound card or other audio source — NOT “speaker-out.”
		Volume level in computer operating system is set	Check the computer operating system volume level and decrease it if necessary.
		too high.
		A problem with your audio source device.	Unplug the stereo cable from the audio source. Then plug it into the
			headphone jack of an alternate audio source (e.g., Walkman, Discman or
			FM radio).
	Sound is	Volume level set too high.	Turn the VOLUME knob counterclockwise to lower the volume.
	distorted.
		Computer operating system volume level is set	Adjust the computer operating system volume and balance levels to the
		too high.	center as a starting point, then adjust the level on the speaker using the
			volume control.
		Sound source is distorted.	WAV files are often of poor quality. So distortion and noise are easily noticed
			with high-powered speakers. Try a different sound source such as a music CD.
	Radio	Too close to a radio tower.	Move your speakers until the interference goes away.
	interference.

3