Altec Lansing IM600USB User Manual

0 (0)

Altec Lansing inMotion Classic Portable Speaker for iPod® Enceinte portable inMotion Classic pour iPod® par Altec Lansing

iM600USB

User Guide

Guide d’utilisation

Altec Lansing IM600USB User Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lightning flash with arrowhead, within an equilateral

Caution: To prevent the risk of electric shock, do not

The exclamation point within an equilateral triangle is

triangle, is intended to alert the user to the presence of

remove cover (or back). No user-serviceable parts

intended to alert the user to the presence of important

uninsulated “dangerous voltage” within the product’s

inside. Refer servicing to qualified service personnel.

operating and maintenance (servicing) instructions

enclosure that may be of sufficient magnitude to

 

 

 

 

in the literature accompanying the appliance.

constitute a risk of electric shock to persons.

 

 

 

 

 

Safety Information

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water – This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.No naked flame sources, such as lighted candles, should be placed on the apparatus.

10.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

11.Protect the power cord from being walked on or pinched – particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12.Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.

13.Power source – Use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply – use only manufacturer-provided power supplies.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Altec Lansing service line for assistance.

16.For products which incorporate batteries, please refer to local regulations for proper battery disposal.

17.Only use attachments/accessories specified by the manufacturer.

18.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Warranty

Altec Lansing One Year Limited Warranty

What Does The Warranty Cover?

Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.

What Is The Period Of Coverage?

This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Does The Warranty Not Cover?

This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Will Altec Lansing Do To Correct The Problem?

Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.

How To Get Warranty Service

To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email (csupport@alteclansing.com). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to provide the same information. If the problem appears to be related to a

defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer’s expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please note that in the European Union, you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing’s goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.

International Distribution

International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on your region.

Disposal of Old Electrical & Electronic Equipment

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

FCC Compliance

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

en

1

Welcome

Thank you for purchasing the Altec Lansing inMotion Classic speaker system. Designed specifically to work with your iPod, this system provides high-quality audio performance that brings out the best in your music.

Please carefully read this User Guide for instructions on setting up and using your inMotion Classic speaker system.

Prior to installing or operating the Altec Lansing inMotion Classic speaker system, refer to the important product safety information.

Getting Assistance

The answers to most setup and performance questions can be found in the Troubleshooting section of this guide. You can also consult the frequently asked questions (FAQ) in the customer support section of our Web site at www.alteclansing.com.

If you live in North America and still can’t find the information you need, please call our customer service team for assistance before returning this product to your retailer under their return policy.

Tel: 800-258-3288 (Toll Free in US and Canada)

Email: csupport@alteclansing.com

If you live outside of North America, please visit our Web site at www.alteclansing.com and select your region to locate your country’s distributor.

For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.

Registering Your Product

Visit www.alteclansing.com to register your product online, so we can provide you with the best possible service and technical support.

Placing the inMotion Classic

Open the inMotion Classic by pressing the button on the front of the speaker system. Position the inMotion Classic on a level surface, preferably close to you (within three feet).

Assembling the inMotion Classic

Dock your iPod by sliding your iPod on top of the iM600 docking station. If necessary, first install the docking adapter that came with your iPod. While the docking adapter is not required for proper functioning of your iPod and iM600, it will provide a better fit.

Note: Alternate audio sources — such as non-dockable iPods, CD players, MP3 players, portable DVD players, and laptops — can also be connected to the inMotion Classic. For more information, see the “Connecting to alternate audio source” section.

Power

Use one of the following two options to power your inMotion Classic:

AC (Wall outlet) Power

Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion Classic. After this connection is made, insert the power supply into a wall outlet.

DC (Battery) Power

The inMotion Classic features a built-in rechargeable Lithium-ion battery.

Charging time

up to 3 hours

Continuous Playing Time

up to 5 hours

Charging the rechargeable battery:

The battery should be fully charged before initial use.

To recharge the battery, insert the barrel connector from the power supply into the DC connector on the rear of the inMotion Classic. After this connection is made, insert the power supply into a

wall outlet. The indicator light turns on. When the battery is fully recharged, the indicator light turns off.

When the battery icon on the LCD screen displays a single segment the battery should be recharged. When the icon starts flashing, the iM600 is about to shut down.

Warning: During the recharging process it is typical for the battery to become warm. To be safe, keep flammable materials away from the inMotion Classic.

Note: To conserve battery power, reduce the inMotion Classic volume level.

Disconnecting the rechargeable battery:

1.Unplug the inMotion Classic from the wall outlet.

2.Open the inMotion Classic by pressing the button on the front of the speaker system.

3.Remove the rechargeable battery compartment cover by removing the 2 screws.

4.Unplug the battery and remove it.

Start Playing

1.Turn on your iPod.

2.Turn on the inMotion Classic by pushing the button. The indicator light turns on.

3.Press the SOURCE button until “iPod” is displayed on the LCD screen.

Note: To avoid hearing a popping sound when you turn on your inMotion Classic, always turn on your audio source first.

Power Off

Turn off the inMotion Classic by pushing the button. The indicator light shuts off.

Auto Shut-down

During battery-only operation the inMotion Classic automatically shuts down if no audio is detected for four minutes. Press the button to turn the inMotion Classic back on.

NOTE: The Auto Shut-down feature is active during battery-only operation. If the AC wall adapter is used, the inMotion Classic will remain on until the button is pushed and the indicator light shuts off.

FM Radio

The inMotion Classic features a built-in FM radio.

Activate the FM radio mode:

Press the SOURCE button until “FM” is displayed on the LCD screen.

2

Scanning FM radio stations:

Press and hold the or buttons to scan radio stations in an incremental manner.

Note: When the reception level of the FM station is strong enough for stereo reception, the FM stereo indicator on the LCD screen will illuminate.

Programming FM radio stations:

To program FM radio stations into the wireless remote, follow the steps below:

1.Press the SOURCE button until “FM” is displayed on the LCD screen.

2.Use the and buttons to tune in the station to be preset.

3.To program the station in the inMotion Classic memory, press and hold for 3 seconds one of the preset buttons [P1, P2, P3, P4] on the wireless remote. The LCD will display the preset number together with the word “SAVED” when a station has been successfully programmed.

Once an FM radio station has been programmed, simply press the appropriate preset button [P1, P2, P3, P4] to select it.

Note: To re-program a station in the inMotion Classic memory, simply repeat steps 1–3.

Connecting to alternate audio source

The inMotion Classic system includes an auxiliary input jack that allows you to connect to alternate audio sources, such as nondockable iPods, CD players, MP3 players, portable DVD players, and laptops. To connect the iM600 to an alternate audio source, follow the steps below.

1.Locate a 3.5 mm stereo cable (sold separately).

2.Connect one end of the 3.5 mm stereo cable into the auxiliary input jack (AUX) located on the back of the inMotion Classic system, and the other end to the headphone or line out jack on your alternate audio device.

3.Press the SOURCE button until “AUX” is displayed on the LCD screen.

4.Set the volume on the audio source at mid-level.

5.Set the volume on the inMotion Classic at minimum level and adjust to a comfortable listening level.

Volume

The “+” and “–” buttons control the master volume. Press and hold the “+” button to increase the volume and the “–” button to decrease the volume.

Alarm Clock Function

The inMotion Classic is compatible with your iPod’s alarm clock feature. To use your iPod and the inMotion Classic as an alarm clock, follow the steps below:

1.Activate the alarm clock feature on your iPod (for more information, consult your iPod user’s guide.)

2.Dock your iPod in the inMotion Classic.

3.Make sure the inMotion Classic is plugged into a wall outlet.

4.Turn on the inMotion Classic by pushing the button. The indicator light turns on.

5.Press the SOURCE button until “iPod” is displayed on the LCD screen.

6.Use the “+” and “–” buttons on the inMotion Classic to set the master volume.

Note: For the alarm clock function to work properly, the inMotion Classic must be plugged in to a wall outlet. The inMotion Classic will otherwise automatically shut down if no audio is detected for four minutes.

en

3

Loading...
+ 11 hidden pages