Specifications
Overall
Total Audio Power |
30 Watts RMS |
|
|
|
|
Input Sensitivity |
300 mV for full |
|
output |
|
|
|
|
|
Input Impedance |
>10 |
kOhms |
|
|
|
Frequency Response |
45 Hz – 18 kHz |
|
|
|
|
Satellites |
|
|
Drivers (per satelllites) |
Two 28 mm |
|
|
micro drivers |
|
|
One 3” mid-bass |
|
|
|
|
Audio Power |
6 Watts per |
|
satellite |
|
|
|
(12 Watts total) |
|
|
RMS |
@ 1% THD |
|
|
|
S/N Ratio |
>70 dB |
|
|
|
|
Subwoofer |
|
|
Driver |
One 6.5” long |
|
throw |
|
|
|
|
|
Audio Power |
18 Watts |
|
|
RMS |
@ 1% THD |
|
|
|
Crossover Frequency |
150 |
Hz |
|
|
|
Power Requirements |
|
|
USA/CANADA |
120 Volts 60 Hz |
|
AC |
|
|
Europe/United Kingdom and
various Asian countries 230 Volts 50 Hz AC
ETL/cETL/CE approved
One Year Limited Warranty
Altec Lansing Technologies, Inc. warrants to the end user that all of its computer speaker systems are free from defects in material and workmanship in the course of normal and reasonable use for a term of one year from the date of purchase.
This warranty is the exclusive and only warranty in effect relative to Altec Lansing computer speaker systems and any other warranties, either expressed or implied, are invalid. Neither Altec Lansing Technologies, Inc. nor any authorized Altec Lansing Technologies, Inc. reseller is responsible for any incidental damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not applicable where prohibited.)
Altec Lansing Technologies, Inc.’s obligation under this warranty does not apply to any defect, malfunction or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment or the use of the computer speaker systems with any equipment for which they were not intended.
The terms of this warranty apply only to computer speaker systems when such speakers are returned to the respective authorized Altec Lansing Technologies, Inc. reseller where they were purchased.
Under the terms of this warranty the original consumer purchaser has certain legal rights and may have other rights which vary worldwide.
User’s Guide
Computer Speaker System
© 2000 Altec |
Lansing Technologies, Inc., |
ATP3 |
Milford, PA |
18337 |
|
800-ALTEC-88 • www.altecmm.com |
|
IMPORTANT
The lightning flash with arrowhead, within an equilateral |
|
|
|
The exclamation point within an equilateral triangle is |
|
|
|
||
|
|
|
||
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT |
||||
triangle, is intended to alert the user to the presence of |
REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS |
intended to alert the user to the presence of important |
||
uninsulated “dangerous voltage” within the product’s enclosure |
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. |
operating and maintenance (servicing) instructions in the |
||
that may be of sufficient magnitude to constitute a risk of |
SAFETY INSTRUCTIONS |
literature accompanying the appliance. |
||
electric shock to persons. |
|
|||
|
|
Read Instructions — All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions — The operating instructions should be retained for future reference.
Heed Warning — All warnings on the appliance and in the operating instructions should be adhered to.
Follow Instructions — All operating and use instructions should be followed.
Water and Moisture — The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
Outdoor Use — Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Location — The appliance should be installed in a stable location.
Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings.
Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
Power Sources — The appliance should be
connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Grounding or Polarization — The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.
Cleaning — The appliance should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.
Non-Use Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
Damage Requiring Service — The appliance should be serviced by qualified service personnel when:
•The power-supply cord or the plug has been damaged.
•Objects have fallen, or liquid has been spilled into the
appliance.
•The appliance has been exposed to rain.
•The appliance does not appear to operate normally or
exhibits a marked change in performance.
Connecting the
Power Cord
AC Wall Socket
Long slot is neutral (ground) side. Insert the wide blade the ground side slot
CAUTION
To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
W A R N I N G
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.