|
|
|
|
Jeep Wrangler |
|
|
|
|
|
|
|
|
WRANGLER |
1/22 |
|
|
|
||
|
|
|
|
|
Jeep Wrangler
X209-WRA-OR
X209-WRA-ORSXM
9” Restyle In-Dash System
Installation Manual
Model: Wrangler
Model Year: 2011-2018
Jeep |
Model |
Year |
|
Wrangler |
2011 - 2018 |
||
|
|||
|
|
|
*The specifiied vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so can lead to electric shock, injury or damage to equipment.
Introduction
Congratulations on purchasing the X209-WRA-OR. This installation manual is designed to take you through the step-by-step installation of X209-WRA-OR into a 2011-2018 Jeep Wrangler. Please familiarize yourself with the owners manual and if you still have additional questions please call 1-800-TECH-101.
Note
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use,Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the product installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you and others, and to protect against damage to property. These symbols and their meanings are listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning |
Ignoring the content marked by this indication and using the product incorrectly is |
|
expected to lead to death or serious injury. |
||
|
||
Caution |
Ignoring the content marked by this indication and using the product incorrectly is only |
|
expected to lead to injury or property damage. |
||
|
||
|
|
|
Jeep Wrangler |
WRANGLER |
2/22 |
Types of Precautions
|
Indicates actions that are forbidden |
|
Indicates actions that are |
Forbidden |
(must not be performed) |
Mandatory |
mandatory (must be performed) |
|
|
||
|
|
|
|
|
Indicates that disassembly is |
|
Marks content that should receive |
Forbidden |
forbidden. |
|
your full attention. |
|
|
|
|
|
|
|
|
Warning
Do not disassemble or modify the product. Doing so could lead to an accident, fire,
or electric shock.
Forbidden
Store screws and other small objects where small children cannot reach them. If one of these small objects is swallowed, consult with a doctor immediately.
When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could lead to an accident or fire.
Forbidden Mandatory
Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to an accident or fire.
Mandatory
Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so could lead to electric shock or injury.
Do not cut the insulation on a cord and take power from another device. Doing so could lead to fire or electric shock.
Forbidden
Do not install the product in a location where it will obstruct the driver’s forward view; interfere with the operation of the steering wheel, gearshift, or the like; or pose a threat to passengers. Doing so could lead to an accident or injury.
Forbidden
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire.
|
Jeep Wrangler |
WRANGLER |
3/22 |
When installing and grounding the product, do not use any of the bolts or nuts of the |
|
steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working |
|
or lead to fire. |
Forbidden |
Do not install the product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury.
Forbidden
Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like, could lead to an accident or damage equipment.
Caution
Connect the product properly according to the instructions. Failing to do so could lead to fire or an accident.
Forbidden
Do not sandwich cords between the seat railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric shock or fire.
Do not block vents or heat sinks. Doing so could lead to fire or damage equipment.
Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment.
Forbidden
Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust. Doing so could lead to fire or damage equipment.
Forbidden
The installation and wiring of this product requires specialized skills and experience. Have the product installed by an Alpine authorized dealer.
|
Jeep Wrangler |
WRANGLER |
4/22 |
|
|
Tools Required
Panel Removing Tool |
7mm Sockets |
#2 Phillips Screwdriver |
10mm Sockets |
Extension |
Ratchet |
Wire Cutters |
Air Saw |
Accessory List
Installation Kit Parts (G-KTX-X209D-WRA)
X209-WRA-OR Radio Dash |
Key Harness |
Side Mounting Brackets |
Bezel |
|
|
MENU
Microphone |
Rear Support Bracket |
Jeep Wrangler
WRANGLER |
5/22 |
Accessory List
Head Unit Box Parts (X209D OR) |
|
|
|
X209D OR DVD/Display Unit |
X209D OR Source Unit |
USB Extension Cable |
|
AUX/Pre Out Harness |
GPS Antenna |
|
Documents |
|
|
|
OM QR Card |
|
|
Alpine |
QRG Navigation |
|
|
Registration Card |
|
Direct Camera Adapter |
Display Cable |
|
HDMI Cable |
Source Unit HDMI Bracket |
DVD/Display HDMI Bracket |
(8) 8mm Screws |
iDatalink Maestro Box Parts (ALP-MRR3/ALP-HRN-WRA2)
Maestro Flashing Cable |
Antenna Adapter |
iDatalink Maestro Module |
Main Harness |
SAT Radio Antenna Adapter |
OEM USB Adapter |
|
Jeep Wrangler |
WRANGLER |
6/22 |
|
|
Programming the iDatalink Maestro Module
1 INSTALL THE WEBLINK PLUG-IN
Go to:
idatalinkmaestro.com/plugin and follow the installation steps. The
Maestro module must be programmed specifically for each vehicle and radio. Take care to enter the correct vehicle information, factory options, head unit model, and head unit serial number. The head units serial number is an alphanumeric value which is found on the head units label, underneath the bar code.
Review the System Requirements before installing.
2 REGISTER A WEBLINK ACCOUNT
Go to:
idatalinkmaestro.com/register and complete the registration process.
Aconfirmation email will be sent to you requiring validation.
For existing customers, click log in.
If the plugin is already installed, the caution, “The plugin is already installed” appears. Please skip to step 2.
4 LOG INTO WEBLINK
Go to: idatalinkmaestro.com/login.
Enter your username and password, then click OK.
3 CONNECT YOUR MAESTRO MODULE
Use your Maestro module to connect to your PC.
5 PROGRAM YOUR MODULE |
6 Once Programing is complete “FLASHING |
COMPLETED!” will be displayed. |
|
Follow the programming steps for your vehicle. |
Proceed to the next page to complete installation. |
NOTE: If serial number is invalid, Call ADS at 1-866-427-2999 with the serial number.
|
Jeep Wrangler |
WRANGLER |
7/22 |
Component Locations
IMPORTANT: Follow the recommended component location shown below. Failure to do so, will result in poor GPS performance.
Add-on Microphone
iDatalink Maestro Module
SAT-Radio Tuner
(Sold Separately)
Jeep |
SINCE 1941 |
Jeep
GPS Antenna Installation
IMPORTANT: Follow the GPS antenna installation procedure shown below. Failure to do so will result in poor GPS performance for CarPlay, Android Auto, and off-road navigation.
GPS Antenna
Wire Hook
Peel the plastic layer off from the double side tape of the GPS antenna and place the GPS antenna on top of the driver side roof frame. T20 Torx to remove the visor.