Alpine IDA-X311, IDA-X311RR, IDA-X313 Owner Manual

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΡΗΣΗ Μ Ν ΣΕ ΑΥΤ ΚΙΝΗΤ

EN

R

Digital Media Receiver

iDA-X313 iDA-X311/iDA-X311RR

• OWNER’S MANUAL

Please read before using this equipment.

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D’EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare il attrezzatura.

(iDA-X313 only)

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna användarhandledning.

• GEBRUIKERSHANDLEIDING

Lees deze aanwijzingen aandachtig alvorens dit toestel te gebruiken.

•РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ Прочтите настоящее руководство перед началом использования оборудования.

•INSTRUKCJA OBSŁUGI

Prosimy zapoznać się z tą instrukcją przed przystąpieniem do użytkowania urządzenia.

• ΕΓ ΕΙΡΙΔΙ ΡΗΣΤΗ Παρακαλ ύμε δια άστε τ πρινρησιμ π ιήσετε τη συσκευή.

	ALPINE ELECTRONICS MARKETING, INC.	ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.	ALPINE ITALIA S.p.A.
	1-1-8 Nishi Gotanda,	161-165 Princes Highway, Hallam	Viale C. Colombo 8, 20090 Trezzano
	Shinagawa-ku,	Victoria 3803, Australia	Sul Naviglio (MI), Italy
	Tokyo 141-0031, Japan	Phone [phone]	Phone [phone]
	Phone [phone]	ALPINE ELECTRONICS GmbH	ALPINE ELECTRONICS DE ESPAÑA, S.A.
	ALPINE ELECTRONICS OF AMERICA, INC.
		Wilhelm-Wagenfeld-Str. 1-3, 80807 München,	Portal de Gamarra 36, Pabellón, 32
	19145 Gramercy Place, Torrance,	Germany	01013 Vitoria (Alava)-APDO 133, Spain
	California 90501, U.S.A.	Phone [phone]	Phone [phone]
	Phone 1-800-ALPINE-1 (1-800-257-4631)	ALPINE ELECTRONICS OF U.K. LTD.	ALPINE ELECTRONICS (BENELUX) GmbH
	ALPINE ELECTRONICS OF CANADA, INC.
		Alpine House	Leuvensesteenweg 510-B6,
	777 Supertest Road, Toronto,	Fletchamstead Highway, Coventry CV4 9TW, U.K.	1930 Zaventem, Belgium
	Ontario M3J 2M9, Canada	Phone [phone]	Phone [phone]
	Phone 1-800-ALPINE-1 (1-800-257-4631)	ALPINE ELECTRONICS FRANCE S.A.R.L.
		(RCS PONTOISE B 338 101 280)
		98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
		B.P. 50016, 95945 Roissy Charles de Gaulle
		Cedex, France
		Phone [phone]
			Designed by ALPINE Japan
			68-16909Z01-A

DE

FR

ES

IT

SE

NL

RU

PL

GR

ENGLISH

Contents

Operating Instructions

WARNING
WARNING .................................................	3
CAUTION ..................................................	3
PRECAUTIONS ........................................	3
Double Action Encoder Operation
(iDA-X313 only)
Getting Started
Accessory List ..................................................	6
Turning Power On and Off ...............................	6
Detaching and Attaching the Front Panel ........	6
Initial System Start-Up .....................................	6
Adjusting Volume .............................................	6
Radio
Listening to Radio ............................................	7
Presetting Stations Manually ............................	7
Presetting Stations Automatically ....................	7
Tuning to Preset Stations ..................................	7
Frequency Search Function ..............................	7
RDS
Setting RDS Reception Mode and Receiving
RDS Stations .................................................	8
Receiving RDS Regional (Local) Stations .......	8
PI SEEK Setting ...............................................	8
Setting PTY31 (Emergency Broadcast)
reception ........................................................	9
Receiving Traffic Information ..........................	9
PTY (Programme Type) Tuning .......................	9
Receiving Traffic Information While Playing
iPod or Radio ................................................	9
Priority News ..................................................	10
Displaying Radio Text ....................................	10

iPhone (iDA-X313 only)/iPod (Optional)

Playback ..........................................................	11
Searching for a desired Song/Title ..................	11
Percent Skip Function .....................................	12
Alphabet Skip Function (iDA-X313 only) .....	12
Up/Down Function .........................................	12
Search Position Memory .................................	13
Random Play Shuffle (M.I.X.) ........................	13
Random Play Shuffle All ................................	13
Repeat Play .....................................................	13
Changing the Display .....................................	13
USB memory/Portable audio player
(iDA-X313 only)/Changer (Optional)
BANK Function (USB memory) ....................	14
Playback ..........................................................	14
Selecting a Disc (Changer) (Optional) ...........	15
Multi-Changer Selection (Optional) ...............	15
Repeat Play .....................................................	15
M.I.X. (Random Play) ....................................	16
Searching for CD Track Number
(CD changer only) .......................................	16
Searching for a desired Song
(USB memory/Portable audio player
(iDA-X313 only)) ........................................	16
File/Folder Name Search (MP3 Changer) ......	17
Switching between Quick Search mode and
Folder up/down mode (MP3 changer)
(iDA-X311/iDA-X311RR only) ..................	17
Quick Search (changer) ..................................	17
Select the desired Folder (Folder up/down)
(MP3/WMA/AAC) ......................................	18
Changing the Display .....................................	18
About MP3/WMA/AAC .................................	18
Sound Setting
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Loudness/Defeat ..........................................	20
Setting the Subwoofer/Subwoofer System/
Bass/Treble/High Pass Filter .......................	20
Operating the External Audio Processor ........	21
1-EN

SETUP
BLUETOOTH Setting
Setting the BLUETOOTH Connection ............	23
Audio Setting (Only when external audio
processor is connected)
Operating the External Audio Processor
(USER PRESET) .........................................	23
Turning Media Xpander ON/OFF ....................	23
Setting the MX Level .......................................	23
Subwoofer On and Off .....................................	23
General Setting
Connecting an MP3 Changer
(PLAY MODE) ............................................	23
Sound (Beep) Guide Function
(iDA-X313 only) ..........................................	23
Turning Mute Mode On/Off (INT MUTE) ......	23
Setting the AUX+ Mode ..................................	23
Setting the AUX+ NAME Mode .....................	23
Setting the AUX Mode (V-Link) .....................	23
Setting the External Digital Input
(DIGITAL AUX) ..........................................	24
Setting the AUX+ Level (AUX IN GAIN) ......	24
Connecting to an External Amplifier
(POWER IC) ................................................	24
Demonstration ..................................................	24
Display Setting
Dimmer Control ...............................................	24
Scroll Type Setting ...........................................	24
Scroll Setting (TEXT SCROLL) ......................	24
Setting the Language (LANGUAGE) ..............	25
iPod Setting
iPod Search Mode Setting ................................	25
TUNER Setting
Adjusting Source Signal Levels .......................	25
IMPRINT Operation (Optional)
(iDA-X313 only)
Changing MultEQ mode .................................	25
Adjusting Sound Setting in Manual Mode .....	26
USER PRESET ...........................................	26
Storing the Audio Adjustment Level ...............	26
Recalling the Audio Adjustment Level ............	26
Turning Media Xpander ON/OFF ...............	26
Equalizer Presets (Factory’s EQ)
(FR-EQ) ...................................................	26

Sound Field Adjustment ..............................	27
Adjusting the Parametric Equalizer Curve .......	27
Adjusting the Graphic Equalizer Curve ...........	27
Adjusting the Time Correction .........................	27
Adjusting the Crossover Settings
(X-OVER) ....................................................	28
Turning Subwoofer ON/OFF .......................	29
Setting the Subwoofer System .....................	29
Setting the Subwoofer Phase .......................	29
Setting the Subwoofer Channel
(SUBW CHANNEL) ................................	29
Setting the Response Slope for the
High Range Speaker (TW Setup) .............	29
Setting EQ mode ..........................................	29
Setting the Filter type ...................................	29
Setting the Time Correction Unit (TCR) .....	29
Setting the MX Level ...................................	30
About Time Correction ...................................	30
About the Crossover ........................................	31
Information
In Case of Difficulty ........................................	32
Specifications ..................................................	35
Installation and Connections
Warning ...................................................	36
Caution ...................................................	36
Precautions ............................................	36
Installation .......................................................	37
Connections .....................................................	39

2-EN

Operating Instructions

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Installation Location

Make sure this unit will not be installed in a location subjected to:

•Direct sun and heat

•High humidity and water

•Excessive dust

•Excessive vibrations

Protecting the USB connector

•Only a USB memory, iPhone (iDA-X313 only), iPod or Portable audio player (iDA-X313 only) can be connected to the USB connector on this unit. Correct performance using other USB products cannot be guaranteed. A USB hub is not supported.

•If the USB connector is used, be sure to connect it to the unit by using a USB extension cable (supplied).

•Depending on the connected USB memory device, the unit may not function or some functions may not be performed.

•The audio file format that can be played back on the unit is MP3/ WMA/AAC.

•Artist/song name, etc., can be displayed, however characters may not be correctly displayed.

3-EN

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product.

On Handling USB Memory

•To prevent malfunction or damage, note the following points. Read the USB memory Owner’s Manual thoroughly.

Do not touch the terminals by hand or metal. Do not subject USB memory to excessive shock.

Do not bend, drop, disassemble, modify or soak in the water.

•Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high temperatures.

Anywhere the possibility of high humidity or corrosive substances are present.

•Fix the USB memory in a location where driver operation will not be hindered.

•USB memory may not function correctly at high or low temperature.

•Use only certified USB memory. Note that even certified USB memory, may not function correctly depending on its type or state.

•USB memory function is not guaranteed. Use USB memory according to the terms of agreement.

•Depending on the settings of the USB memory type, memory state or encoding software, the unit may not play back or display properly.

•Files that are copy-protected (using some type of DRM, Digital Rights Management) cannot be played back on this unit. WMA format files with DRM or AAC format files that have been purchased from the iTunes Store are included in this restriction.

•USB memory may take time to start playback. If there is a particular file other than audio in the USB memory, it may take considerable time before the file is played back or searched.

•The unit can play back “mp3”, “wma” or “m4a” file extensions.

•Do not add the above extensions to a file other than audio data. This non-audio data will not be recognized. The resulting playback may contain noise that can damage speakers and/or amplifiers.

•It is recommended to back up important data on a personal computer.

•Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory.

On Handling Portable audio player (iDA-X313 only)

•The unit can control a Portable audio player with the USB interface. Playable audio file formats are MP3 and WMA.

•Portable audio player function is not guaranteed. Use Portable audio player according to the terms of agreement. Read the Portable audio player Owner’s Manual thoroughly.

•Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high temperatures.

Anywhere the possibility of high humidity or corrosive substances are present.

•Fix the Portable audio player in a location where driver operation will not be hindered.

•Portable audio player may not function correctly at high or low temperature.

•Depending on the settings of the Portable audio player type, memory state or encoding software, the unit may not play back or display properly.

•If the Portable audio player has an MSC/MTP setting, set to MTP.

•A Portable audio player in which data is stored by USB Mass Storage may not be playable on the unit.

•Depending on the Portable audio player settings, USB Mass Storage may be supported. For setting, refer to the Owner’s Manual of the player.

•The unit can play back MP3/WMA files synchronized by Windows Media Player (Ver. 7.1, 8, 9, 9.1, 9.2), and are then forwarded to the player. The “mp3” or “wma” extensions are playable.

•If data is not synchronized by Windows Media Player and is forwarded in another way, the unit may not be able to correctly play back the files.

•WMDRM10 is supported by the unit.

•A file that is copy-protected (copyright protection) cannot be played back.

•It is recommended to back up important data on a personal computer.

•Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory.

•Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

•iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

•iPhone is a trademark of Apple Inc.

•“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

•“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

•Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

•The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license.

•“MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.”

•“Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com”

•Audyssey MultEQ XT is a registered trademark of Audyssey Laboratories Inc.

4-EN

Double Action Encoder Operation (iDA-X313 only)

Double Action encoder

There are 2 ways to operate the Double Action encoder.

Normal operation

Turn the Double Action encoder to the left or right.

To adjust volume and scroll through a list of items.

Alternate operation

Press and turn the Double Action encoder to the left or right.

When you release the Double Action encoder, the display changes.

Double Action encoder

Push

Depending on the situation, you can change an item or display. If you press and turn the Double Action encoder to the left or right, you can change items/displays continuously.

5-EN

Getting Started

iDA-X313

(Release) Double Action encoder

SOURCE iDA-X311/iDA-X311RR

(Release)

Rotary encoder

	SOURCE
Accessory List
•	Digital Media receiver........................................................		1
•	Power cable ........................................................................		1
•	USB Cable ..........................................................................		1
•	Interface cable for iPod (iDA-X313 only)		..........................1
• FULL SPEED Connection Cable
	(iDA-X311/iDA-X311RR only) ............................................		1
•	Mounting sleeve.................................................................		1
•	Carrying case.....................................................................		1
•	Rubber Cap ........................................…………………….. 1
•	Hex Bolt ........................................	………………………... 1
•	Screw (M5x8)......................................................................		4
•	Owner’s Manual ..........................................................		1 set

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1 Turn off the unit power.

2 Press(Release) to remove the front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

Turning Power On and Off

Press SOURCE to turn on the unit.

•The unit can be turned on by pressing any other button except

(Release) and Double Action encoder (iDA-X313 only). The unit is also automatically turned on if a USB memory/iPhone*/iPod is connected to the USB connector.

* iDA-X313 only.

Press and hold SOURCE for at least 2 seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press (Release) at the middle left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

6-EN

Adjusting Volume

Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) until the desired sound is obtained.

Controllable With Remote Control

Point the optional remote control transmitter at the remote control sensor.

Remote control sensor

Connectable to Steering Remote Control Interface Box

You can operate this unit from the vehicle’s control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

Radio

iDA-X313

SOURCE

Double Action encoder

BAND/TA TUNE/A.ME /ENTER PRESET iDA-X311/iDA-X311RR

SOURCE

Rotary encoder

BAND/TA TUNE/A.ME

/ENTER

PRESET

Listening to Radio

1 Press SOURCE to select TUNER mode.

2 Press BAND/TA repeatedly until the desired radio band is displayed.

FM1FM2FM3MWLWFM1

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode)SEEK (Local mode) (Blank) (Manual mode)DX SEEK (Distance mode)

• The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Press	or	to tune in the desired station.
Holding down		or	will change the frequency
continuously.

Presetting Stations Manually

1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.

2 Press PRESET.

The Preset screen is displayed.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the preset number.

4 Press and hold /ENTER for at least 2 seconds.

The selected station is stored.

The display shows the band, preset number and station frequency memorized.

•A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW).

•If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

Presetting Stations Automatically

1 Press BAND/TA repeatedly until the desired radio band is displayed.

2 Press and hold TUNE/A.ME for at least 2 seconds.

The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.

•If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1 Press BAND/TA repeatedly until the desired band is displayed.

2 Press PRESET.

The Preset screen is displayed.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select a radio station.

4 Press /ENTER.

The display shows the band, preset number and frequency of the station selected.

Frequency Search Function

You can search for a radio station by its frequency.

1 Press /ENTER in Radio mode to activate Frequency search mode.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the desired frequency.

3 Press /ENTER to receive the selected frequency.

•Press in the search mode to cancel. Or, the search mode will be cancelled if no operation is performed for 10 seconds.

7-EN

RDS

iDA-X313

Double Action encoder FUNCTION/SETUP

BAND/TA /ENTER VIEW

iDA-X311/iDA-X311RR

Rotary encoder FUNCTION/SETUP

BAND/TA

/ENTER

VIEW

Setting RDS Reception Mode and

Receiving RDS Stations

The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.

1 Press FUNCTION/SETUP so that the <F> indicator lights up.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the AF (Alternative Frequency) mode, and then press /ENTER.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ON, and press /ENTER.

4 Press FUNCTION/SETUP to activate the RDS mode.

The <F> indicator goes out.

•Operate the unit while the <F> indicator lights up. If no operation is performed for 10 seconds, the <F> indicator goes out.

•When the “Setting PTY31 (Emergency Broadcast) reception” (refer to page 9) is set to ON, if the unit receives the PTY31 (Emergency Broadcast) signal, the unit will show “ALARM” in the display automatically.

The RDS digital data includes the following:

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

PTY Programme Type

EON Enhanced Other Networks

8-EN

Receiving RDS Regional (Local)

Stations

1 Press and hold FUNCTION/SETUP for at least 2 seconds to activate the SETUP selection mode.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the TUNER mode, and then press /ENTER.

BT*1 AUDIO*2 GENERAL DISPLAY IPOD TUNER BT

*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO.

*2 Displayed only when an external audio processor is connected. For details, refer to the Owner’s Manual of the external audio processor.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select RDS REGIONAL, and then press /ENTER.

4 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the related local RDS station.

5 Press and hold for at least 2 seconds to return to normal mode.

•Pressing during the procedure will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

PI SEEK Setting

1 Press and hold FUNCTION/SETUP for at least 2 seconds to activate the SETUP selection mode.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the TUNER mode, and then press /ENTER.

BT*1 AUDIO*2 GENERAL DISPLAY IPOD TUNER BT

*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO.

*2 Displayed only when an external audio processor is connected. For details, refer to the Owner’s Manual of the external audio processor.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select PI SEEK and then press /ENTER.

4 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ON or OFF.

5 Press and hold for at least 2 seconds to return to normal mode.

•Pressing during the procedure will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Setting PTY31 (Emergency Broadcast) reception

Turn PTY31 (Emergency Broadcast) reception ON/OFF.

1 Press and hold FUNCTION/SETUP for at least 2 seconds to activate the SETUP selection mode.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the TUNER mode, and then press /ENTER.

BT*1 AUDIO*2 GENERAL DISPLAY IPOD TUNER BT

*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO.

*2 Displayed only when an external audio processor is connected. For details, refer to the Owner’s Manual of the external audio processor.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ALERT PTY31 and then press /ENTER.

4 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ON or OFF.

If you set to ON, emergency broadcasts are received regardless of source. “ALARM” is displayed during reception.

5 Press and hold for at least 2 seconds to return to normal mode.

When an emergency broadcast is received, the volume level will be automatically changed to the memorized level in the traffic information mode. For details, refer to “Receiving Traffic Information” on page 9.

•Pressing during the procedure will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Receiving Traffic Information

1 Press and hold BAND/TA for at least 2 seconds so that the “TA” indicator lights up.

When a traffic information station is tuned in, the “TP” indicator lights up.

Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the TRF-INFO screen is displayed.

When the traffic information broadcast is over, the unit will automatically set in the standby mode.

•If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the “TA” indicator blinks.

•If you do not want to listen to the traffic information being received, lightly press BAND/TA to skip that traffic information message. The TA mode will remain in the ON position to receive the next traffic information message.

•If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized.

PTY (Programme Type) Tuning

1 Press FUNCTION/SETUP so that the <F> indicator lights up.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select PTY, and press /ENTER, while the unit is in Radio (FM receiving) mode.

The PTY Select screen is displayed.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to choose the desired programme type.

4 Press /ENTER after selecting the programme type to start searching for a station in the selected programme type.

The chosen programme type display blinks during searching and lights when a station is found.

If no PTY station is found, “NO PTY” will be displayed for

10seconds.

•Operate the unit while the <F> indicator lights up. If no operation is performed for 10 seconds, the <F> indicator goes out.

Receiving Traffic Information While Playing iPod or Radio

1 Press and hold BAND/TA for at least 2 seconds so that the “TA” indicator lights up.

When a traffic information broadcast starts, the unit automatically mutes the iPod/USB memory/Portable audio player (iDA-X313 only)/changer or the regular FM broadcast.

When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began.

When traffic information stations cannot be received:

In the tuner mode:

When the TP signal can no longer be received for over 1 minute, the “TA” indicator blinks.

In the iPod/USB memory/Portable audio player (iDA-X313 only)/changer mode:

When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically.

•The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The “EON” indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs.

2 Press and hold BAND/TA for at least 2 seconds to deactivate the Traffic Information mode.

The “TA” indicator goes out.

9-EN

Priority News

This function allows you to preset to give priority to the News programme. You will never miss the News programme as the unit automatically gives priority to the News programme whenever it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW modes.

1 Press FUNCTION/SETUP to activate the Function mode while the unit is in Radio (FM receiving) mode.

The <F> indicator lights up.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select NEWS, and press /ENTER.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select ON, and press /ENTER.

4 Press to return to normal mode.

The <F> indicator goes out.

•Operate the unit while the <F> indicator lights up. If no operation is performed for 10 seconds, the <F> indicator goes out.

•In the NEWS function, unlike in the TA function, the volume does not increase automatically.

Displaying Radio Text

Text messages from a radio station can be displayed.

Press VIEW while receiving FM in the radio mode to select the Radio Text display.

The display will change every time the button is pressed.

If there is PS (Programme Service Name)

Band					Band
PS (Programme		Radio Text			PS (Programme
Service Name)					Service Name)
If there is no PS (Programme Service Name)
Band		Radio Text			Band
Frequency					Frequency

•If there is no receivable text information or the unit cannot receive text information properly, “NO TEXT” will be displayed.

iPhone (iDA-X313 only)/iPod (Optional)

iDA-X313

Double Action encoder FUNCTION/SETUP

SOURCE /

/ENTER

VIEW

iDA-X311/iDA-X311RR

Rotary encoder

FUNCTION/SETUP

SOURCE /

/ENTER

VIEW

An iPhone (iDA-X313 only)/iPod can be connected to this unit. When this unit is connected, the controls on the iPod are not functional. Depending on the unit, iPhone (iDA-X313 only)/iPod connection can be made in two different ways.

iDA-X313 : The iPhone/iPod only can be connected to the USB connector by using the Interface cable for iPod (supplied, iDA-X313 only).

iDA-X311/

iDA-X311RR : The iPod only can be connected to Full Speed connector by using the proprietary ALPINE FULL SPEED Connection Cable (KCE-433iV) (supplied, iDA-X311/iDA-X311RR only).

•Set AUX+ to OFF when an iPod is connected to iDA-X311/ iDA-X311RR, refer to “Setting the AUX+ Mode” on page 23.

•Internet and telephone functions of iPod touch or iPhone, etc., can also be used when connecting to the unit. However, using these functions will stop or pause the playing songs, at this time do not operate the unit to avoid a malfunction.

•If you connect an iPhone to this unit, it can be used as an iPod. If you use iPhone as a hands-free phone, you need the optional BLUETOOTH INTERFACE (KCE-400BT).

•If the BLUETOOTH INTERFACE (KCE-400BT) and an iPod are connected at the same time, be sure to disconnect the iPod from the BLUETOOTH INTERFACE (KCE-400BT) while turning ACC to OFF (only for iDA-X311/iDA-X311RR).

10-EN

iPhone (iDA-X313 only)/iPod models usable with this unit

•Confirmed devices regarding Made for iPod. Correct function of earlier versions cannot be guaranteed.

iPod touch (2nd generation): Ver.2.2 iPod nano (4th generation): Ver.1.0.3 iPod classic (120GB): Ver.2.0.1 iPod touch (1st generation): Ver.2.2 iPod nano (3rd generation): Ver.2.0

iPod classic (80GB, 160GB): Ver.1.1.2 iPod nano (2nd generation): Ver.1.1.3 iPod with video: Ver.1.3

iPod nano (1st generation): Ver.1.3.1

Confirmed devices regarding Works with iPhone. Correct function of earlier versions cannot be guaranteed.

iPhone 3G: Ver.2.2 (iDA-X313 only) iPhone: Ver.2.2 (iDA-X313 only)

•For clarity in identifying your model of iPod, please see Apple’s own document “Identifying iPod models” at http://support.apple.com/kb/HT1353

•This unit does not support video playback from iPhone/iPod, even using a video-compatible cable.

Playback

1 Press SOURCE to switch to the IPOD (iDA-X311/ iDA-X311RR only) or USB IPOD (iDA-X313 only) mode.

2 Press or to select the desired song.

Pressing and holding or will fast backward/fast forward the current track.

3 To pause playback, press / .

Pressing / again will resume playback.

•If a song is playing on the iPhone (iDA-X313 only)/iPod when it is connected to this unit, it will continue playing after the connection.

•An episode or audiobook may have several chapters, the chapter can be changed by pressing or .

Searching for a desired Song/Title

An iPhone (iDA-X313 only)/iPod can contain hundreds of songs. By keeping these songs organized in playlists, this unit can use these to ease song searches.

Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/ Song search mode’s individual hierarchy, you can narrow down your search as shown in the table below.

Hierarchy 1	Hierarchy 2	Hierarchy 3	Hierarchy 4
PLAYLISTS	SONG	—	—
ARTISTS*	ALBUM*	SONG	—
ALBUMS*	SONG	—	—
PODCASTS	EPISODE	—	—
AUDIOBOOKS	—	—	—
GENRES*	ARTIST*	ALBUM*	SONG
COMPOSERS*	ALBUM*	SONG	—
SONGS	—	—	—

•You can select your preferred search mode. Refer to “iPod Search Mode Setting” (page 25).

For example: Searching by Artist name

The following example explains how an ARTISTS search is performed. Another search mode can be used for the same operation, although the hierarchy differs.

1 Press /ENTER to activate the Menu Select mode.

2 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the ARTISTS, and then press /ENTER.

The artist search mode is activated and artists names are displayed.

3 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select the desired Artist, and then press /ENTER.

The album search mode is activated and albums names are displayed.

4 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select an album, and then press /ENTER.

The song search mode is activated and songs names are displayed.

5 Turn the Double Action encoder (iDA-X313 only) or Rotary encoder (iDA-X311/iDA-X311RR only) to select a song and press /ENTER.

The selected song is played back.

•While in the search mode, if you press and hold for at least 2 seconds the search mode is cancelled.

•In the search mode, pressing will return to the previous mode.

•When search is made during M.I.X. play, the M.I.X. play mode will be cancelled.

•“NO SONG” will be displayed if there are no songs in the selected playlist in the PLAYLISTS search mode.

•“NO PODCAST” will be displayed if there is no podcast data in the iPhone (iDA-X313 only)/iPod in the PODCASTS search mode.

•“NO A-BOOK” will be displayed if there is no audiobook data in the iPhone (iDA-X313 only)/iPod in AUDIOBOOKS search mode.

11-EN