Alpine CDM-9803R, CDE-9802RB, CDM-9803RM, CDM-9805R, CDE-9801R User Manual

...
0 (0)

R

CDM-9807RB

CDM-9805R

CDM-9803RM

CDM-9803R

CDE-9802RB

CDE-9801R

FM/MW/LW/RDS CD Receiver

• OWNER'S MANUAL

Please read before using this equipment.

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare il attrezzatura.

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna användarhandledning.

EN

DE

FR

ES

IT

 

 

 

 

 

 

 

 

 

 

 

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ELECTRONICS FRANCE S.A.R.L.

 

1-1-8 Nishi Gotanda,

6-8 Fiveways Boulevarde Keysborough,

(RCS PONTOISE B 338 101 280)

 

Shinagawa-ku,

Victoria 3173, Australia

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

 

Tokyo 141-0031, Japan

Phone 03-9769-0000

B.P. 50016, 95945 Roissy Charles de Gaulle

 

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

Cedex, France

SE

ALPINE ELECTRONICS OF AMERICA, INC.

Phone 01-48638989

Kreuzerkamp 7,

ALPINE ITALIA S.p.A.

19145 Gramercy Place, Torrance,

40878 Ratingen, Germany

 

California 90501, U.S.A.

Phone 02102-4550

Viale C. Colombo 8, 20090 Trezzano Sul

 

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF U.K. LTD.

Naviglio (MI), Italy

 

ALPINE ELECTRONICS OF CANADA, INC.

Phone 02-484781

 

Alpine House

 

 

 

7300 Warden Ave., Suite 203, Markham,

Fletchamstead Highway, Coventry CV4 9TW, U.K.

ALPINE ELECTRONICS DE ESPAÑA, S.A.

 

Ontario L3R 9Z6, Canada

Phone 0870-33 33 763

Portal de Gamarra 36, Pabellón, 32

 

Phone 1-800-ALPINE-1 (1-800-257-4631)

 

 

 

 

 

 

 

01013 Vitoria (Alava)-APDO 133, Spain

 

 

 

 

 

 

 

 

 

Phone 945-283588

 

 

Designed by ALPINE Japan

Meiyi Printing Factory, Dalian, China

Printed in China (Y)

No. 28 Chang Qing Street, Xi Gang District, Dalian, China

68P02294K52-O

CHM-S630

• CD changer for CDM-9807RB/CDM-9805R/

CDM-9803RM/CDM-9803R

CHA-S634 CHA-1214 • CD-Wechsler für CDM-9807RB/CDM-9805R/ CDM-9803RM/CDM-9803R

• Changeur CD pour CDM-9807RB/CDM- 9805R/CDM-9803RM/CDM-9803R

• Cambiador de CD para CDM-9807RB/CDM- 9805R/CDM-9803RM/CDM-9803R

• Cambia CD per CDM-9807RB/CDM-9805R/ CDM-9803RM/CDM-9803R

• CD-växlare för CDM-9807RB/CDM-9805R/ CDM-9803RM/CDM-9803R

Alpine CD Changers Give You More!

More musical selections, more versatility, more convenience.

The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW PLAY BACK.

NOTE

The CHA-S634 model can be connected to the M-Bus model Head Unit using the optional M-Bus/Ai-NET compatible cable. (KCA-130B)

Von Alpine CD-Wechslern haben Sie mehr!

Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.

Der CHA-S634 ist ein Hochleistungs-Wechsler für 6 CDs mit dem neuen M-DAC, mit CD-R/RW- und MP3-Wiedergabefunktion und mit CD-TEXT. Der CHA-1214 ist ein Ai-NET-Modell für 12 CDs. Der M-Bus-kompatible CHM-S630 ist ein superkompakter Wechsler für 6 CDs mit CD-R/RW-Wiedergabefunktion.

HINWEIS

Das Modell CHA-S634 kann mit einem M-Bus-/Ai-NET-kompatiblen Kabel (KCA-130B) an das zusätzlich erhältliche M-Bus-Hauptgerät angeschlossen werden.

Changeurs de CD Alpine : vous avez le choix!

Plus de sélections musicales, plus de souplesse, plus de confort.

Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques super compact doté de la fonction CD-R/RW PLAY BACK.

REMARQUE

Le modèle CHA-S634 peut être raccordé à l’appareil principal du modèle M-Bus en option à l’aide du câble compatible M-Bus/Ai-NET (KCA-130B).

¡Los cambiadores Alpine de CD le ofrecen más!

Más selecciones musicales, más versatilidad y más ventajas.

CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño reducido con un CD-R/RW PLAY BACK.

NOTA

El modelo CHA-S634 se puede conectar a la unidad principal del modelo opcional M-Bus utilizando el cable compatible M-Bus/Ai-NET. (KCA-130B)

I caricatori CD Alpine danno di più!

Più scelta, più versatilità, più comodità.

Il modello CHA-S634 è un caricatore a 6 dischi ad elevate prestazioni dotato di un nuovo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK e CD TEXT. Il modello CHA-1214 Ai-NET è in grado di contenere 12 dischi, il modello CHM-S630 M-Bus è un caricatore a 6 dischi ultra compatto dotato di un CD-R/RW PLAY BACK.

NOTA

Il modello CHA-S634 può essere collegato all’unità principale modello M-Bus mediante il cavo M-Bus/Ai-NET compatibile (KCA-130B).

Alpines CD-växlare ger mer!

Fler musikval, mer variation, större bekvämlighet.

CHA-S634 är en växlare för 6 skivor med mycket höga prestanda och en ny M D/A-omvandlare samt uppspelning av CD-R/RW, MP3 och CD TEXT. CHA-1214 Ai-NET rymmer 12 skivor. CHM-S630 M-Bus är en mycket kompakt växlare med kapaciteten 6 skivor med uppspelning av CD-R/RW PLAY BACK.

OBS!

CHA-S634 kan inte anslutas till M-Bus Huvudenhet (tillval) med en M-Bus/Ai-NET-kompatibel kabel. (KCA-130B)

Contents

 

Operating Instructions

 

WARNING

 

WARNING ..................................................

2

CAUTION ...................................................

2

PRECAUTIONS .........................................

2

Basic Operations

 

Detaching the Front Panel ..................................

4

Attaching the Front Panel ..................................

4

Initial System Start-Up ......................................

4

Turning Power On and Off ................................

5

Adjusting Volume/Balance (Between Left and

 

Right)/Fader (Between Front and Rear) .........

5

Turning Loudness On/Off ..................................

5

Audio Mute Function .........................................

5

Setting the Bass Control ....................................

6

Setting the Treble Control ..................................

6

Setting the Bass Type .........................................

7

Blackout Mode On and Off

 

(CDM-9807RB only) .....................................

7

Changing Audio Level Display Pattern

 

(CDM-9807RB/CDM-9805R only) ...............

7

Changing Audio Level Display Pattern

 

(CDM-9803RM/CDM-9803R/CDE-9802RB/

CDE-9801R only) ...........................................

7

Radio Operations

 

Manual Tuning ...................................................

8

Automatic Seek Tuning .....................................

8

Manual Storing of Station Presets .....................

9

Automatic Memory of Station Presets ...............

9

Tuning to Preset Stations ...................................

9

RDS Operations

 

Setting RDS Reception Mode and Receiving

 

RDS Stations ................................................

10

Recalling Preset RDS Stations .........................

10

Receiving RDS Regional (Local) Stations ......

11

Receiving Traffic Information ..........................

11

PTY (Programme Type) Tuning ......................

11

ENGLISH

Receiving Traffic Information While Playing

 

CD or Radio ..................................................

12

Priority News ...................................................

12

CD Player Operations

 

Inserting/Ejecting Disc ....................................

13

Normal Play and Pause ....................................

14

Music Sensor (Skip) .........................................

14

Fast Forward and Backward ............................

14

Repeat Play ......................................................

14

M.I.X. (Random Play) .....................................

15

Scanning Programmes .....................................

15

Controlling CD Changer (Optional)

 

(CDM-9807RB/CDM-9805R/CDM-9803RM/

CDM-9803R only) .......................................

15

SETUP Operations

 

Subwoofer On and Off .....................................

16

Adjusting Source Signal Levels .......................

16

Setting the AUX Mode

 

(CDM-9807RB/CDM-9805R/CDM-9803RM/

CDM-9803R only) .......................................

16

Switching the Tuner Mode

 

(CDM-9807RB/CDM-9805R only) .............

17

Information

 

In Case of Difficulty ........................................

18

Specifications ...................................................

19

Installation and Connections

Warning ............................................................

20

Caution .............................................................

20

Precautions .......................................................

20

Installation .......................................................

21

Connection .......................................................

22

1-EN

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

2-EN

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the Reset switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre

Centre

New

Hole

Hole

Disc

Bumps

 

Outside

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure this unit will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Handling the Detachable Front Panel

Do not expose to rain or water.

Do not drop or apply shock.

Correct Handling

Do not drop the disc while handling. Hold the disc by its edge so that no fingerprints are left on the surface. Do notFR affix tape, paper, or gummed labels to the disc. Do not

write on the disc.

CORRECT

ES

INCORRECT CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc couldDE cause the CD player to skip. For routine cleaning, wipe

the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

IT

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create SE operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet Disc Stabilizer 3

-EN

Alpine CDM-9803R, CDE-9802RB, CDM-9803RM, CDM-9805R, CDE-9801R User Manual

Basic Operations

(CDM-9807RB/CDM-9805R)

(CDM-9803RM/CDM-9803R/CDE-9802RB/CDE-9801R)

SOURCE/

SOURCE/

4 MODE / LOUD

POWER MODE / LOUD (Rotary encoder)

POWER

 

 

 

 

 

MUTE

 

 

 

 

 

3 MUTE

Detaching the Front Panel

1 Press and hold the SOURCE/POWER button for at least 3 seconds to turn off the power.

2 Press the (Release) button at lower left corner until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

NOTES

The front panel may become hot in normal usage (especially the connector terminals), this is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

Attaching the Front Panel

1 First, insert the right side of the front panel into the main unit. Align the groove on the front panel with the projection on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

2

1

NOTE

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Controllable With Remote Control (CDM-9807RB/CDM-9805R/CDM-9803RM/ CDM-9803R only)

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.

Point the optional remote control transmitter at

the remote control sensor.

Remote control sensor

Connectable to Remote Control Interface Box (CDM-9807RB/CDM-9805R/CDM-9803RM/ CDM-9803R only)

You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

Initial System Start-Up

1 Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the right of the connector, there is a small hole. Using a pencil or other pointed object, press the Reset switch mounted behind this hole to complete the initialization procedure.

1

Reset switch

4-EN

Turning Power On and Off

1 Press the SOURCE/POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button.

The volume level gradually increases to the previous level you were listening to before the unit was turned off.

Press and hold the SOURCE/POWER button again for at least 3 seconds.

NOTE

The very first time the power is turned on, the volume will start from level 12, and the LOUD function will be on in the tuner mode.

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

1 Press the MODE/LOUD button repeatedly to choose the desired mode.

Each press changes the modes as follows:

→ VOL → SUB-W* → BAL → FAD

Volume: 0 ~ 35

Balance: L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

NOTES

If the Rotary encoder (CDM-9807RB/CDM-9805R only) is not turned or the 5 or 6 button (CDM- 9803RM/CDM-9803R/CDE-9802RB/CDE-9801R only) is not pressed in 5 seconds after selecting the BALANCE and FADER modes, the unit automatically sets in the VOLUME mode.

*When the subwoofer is set to ON, the level of the subwoofer can be adjusted.

2 Turn the Rotary encoder (CDM-9807RB/CDM-

9805R only) or press the 3 and 4 buttons (CDM-9803RM/CDM-9803R/CDE-9802RB/CDE- 9801R only) until the desired sound is obtained in each mode.

Turning Loudness On/Off

Loudness introduces a special lowand highfrequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.

1 Press and hold the MODE/LOUD button for at least 2 seconds to activate or deactivate the loudness mode. The display shows "LOUD ON" when the loudness mode is activated.

Audio Mute Function

FR

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20

dB.

 

Pressing the MUTE button again will bring the

ES

audio back to its previous level.

DE

IT

Indicators on the CDM-9807RB/CDM-9805R/

SE

CDM-9803R

The underline is lit when the function is activated.

5-EN

Basic Operations

(CDM-9807RB/CDM-9805R)

(CDM-9803RM/CDM-9803R/CDE-9802RB/CDE-9801R)

g

BAND

Rotary encoder

g

BAND

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f CENTER f

DISP/B. OUT

f CENTER f

3

 

(CDM-9807RB only)

 

 

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal preference.

1 Press the CENTER f button to select the Bass setting mode.

Each press changes the modes as follows.

Bass setting Treble setting Normal

mode mode mode

2-1 Setting the Bass frequency:

Press the g or f button to select the desired Bass centre frequency.

60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz

Emphasizes the displayed Bass frequency ranges.

2-2 Setting the Bass Band Width (Q-Factor): Press the BAND button to select the desired Bass Band Width.

→ WIDE1 → WIDE2→ WIDE3 → WIDE4 (Narrow)←......................... →(Wide)

Changes the displayed frequency's band width to narrow or wide.

2-3 Setting the Bass Level:

Turn the Rotary encoder (CDM-9807RB/CDM- 9805R only) or press the 3 or 4 button (CDM- 9803RM/CDM-9803R/CDE-9802RB/CDE-9801R only) to select the desired Bass Level

(-7~+7).

You can emphasize or weaken the bass frequency.

NOTES

If no buttons are pressed within 15 seconds, the Bass control setting will be turned off automatically.

6-EN

The settings of the Bass Level will be individually memorized for each source (FM, MW (LW) and CD) until the setting is changed. Once you set Bass frequency and Bass Band Width for one of sources (FM, MW (LW) and CD), this setting becomes

effective for all those sources.

*Selecting any of the "Setting the Bass Types" (TYPE 1 through 3), temporarily replaces the custom settings you have made above.

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal preference.

1 Press the CENTER f button to select the Treble setting mode.

Each press changes the modes as follows.

Bass setting Treble setting Normal mode mode mode

2-1 Setting Treble frequency:

Press g or f button to select the desired Treble centre frequency.

10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz

Emphasizes the displayed Treble frequency ranges.

2-2 Setting Treble Level:

Turn the Rotary encoder (CDM-9807RB/CDM- 9805R only) or press the 3 or 4 button (CDM- 9803RM/CDM-9803R/CDE-9802RB/CDE-9801R only) to select the desired Treble Level

(-7~+7).

You can emphasize the treble frequency.

NOTES

If no buttons are pressed within 15 seconds, the Treble control setting will be turned off automatically.

The settings of the Treble Level will be individually memorized for each source (FM, MW (LW) and CD) until the setting is changed. Once you set Treble frequency for one of sources (FM, MW (LW) and CD), this setting becomes effective for all those sources.

Setting the Bass Type

This function allows for 3 different Bass type settings. Select the one that appeals to you the most.

1 Press and hold the CENTER f button for at least 2 seconds to set the Bass type.

2 Select the desired TYPE (1 through 3) by pressing the g or f button within 15 seconds.

Type 1 will sound best if you have a subwoofer in your system. Use Type 2 or 3 if you are using small diameter speakers.

3 Press the CENTER f button for at least 2 seconds to return to the normal mode.

NOTES

“Bass Center Frequency” and “Bass Band Width” previously set are replaced when selecting TYPE 1 through 3. When Bass Type is OFF, your previous settings are restored.

If you connect an external audio processor, the setting cannot be carried out.

Blackout Mode On and Off (CDM-9807RB only)

When the Blackout mode is turned on, the display will turn off to reduce power consumption.

This additional power enhances the sound quality.

1 Press and hold the DISP/B.OUT button for at least 3 seconds to start the blackout mode. By doing so the display will turn off.

NOTE

If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.

To cancel the blackout mode, press and hold the DISP/B.OUT button for at least 3 seconds.

Changing Audio Level Display Pattern (CDM-9807RB/CDM-9805R only)

1 Press the DISP button to switch the display

 

 

 

 

pattern.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

→ DISP1

→ DISP2

DISP OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISP1:

 

 

 

 

 

 

 

 

 

Lights the Volume indicator.

 

 

 

 

 

 

 

DISP2:

 

 

 

 

 

 

 

 

 

Lights the mode and value bars to show the

 

 

 

 

 

 

 

settings in the Bass engine display.

 

 

 

 

DISP OFF:

 

 

 

 

 

FR

 

Turns off the light in Audio Level display.

 

If you set DISP OFF, the Volume indicator and

 

 

 

 

Bass engine displays are not lit at all times.

 

 

 

Changing Audio Level Display

 

 

 

 

 

 

Pattern

 

 

 

 

 

 

 

 

(CDM-9803RM/CDM-9803R/

ES

CDE-9802RB/CDE-9801R only)

 

 

 

1 Press and hold the F/SETUP button for at least

 

 

 

 

 

 

 

3 seconds.

 

 

 

 

 

 

 

 

2 Press the g or f button to select DISP.

 

 

 

 

 

 

3 Press the BAND button to switch the display

DE

 

pattern.

 

DISP OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

→ DISP1

→ DISP2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISP1:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights the Volume indicator.

 

 

 

 

DISP2:

 

 

 

 

 

 

 

 

 

Lights the mode and value bars to show the

 

 

 

 

settings in the Bass engine display.

 

 

 

 

DISP OFF:

 

 

 

 

 

IT

 

Turns off the light in Audio Level display.

 

 

 

If you set DISP OFF, the Volume indicator and Bass engine displays are not lit at all times.

4 When the setting is completed, press the F/SETUP button to return to the normal mode.

SE

7-EN

Loading...
+ 19 hidden pages