Alpine CDE-9874RB, CDE-9874R, CDE-9872RE, CDE-9874RR, CDE-9872R User Manual

0 (0)

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΡΗΣΗ Μ Ν ΣΕ ΑΥΤ ΚΙΝΗΤ

EN

R

RDS MP3 CD Receiver

CDE-9874R/CDE-9874RR/ CDE-9874RB/CDE-9872R/ CDE-9872RM/CDE-9872RE

• OWNER’S MANUAL

Please read before using this equipment.

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D’EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USO

Si prega di leggere prima di utilizzare il attrezzatura.

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa igenom denna användarhandledning.

• GEBRUIKERSHANDLEIDING

Lees deze aanwijzingen aandachtig alvorens dit toestel te gebruiken.

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ Прочтите настоящее руководство перед началом использования оборудования.

INSTRUKCJA OBSŁUGI

Prosimy zapoznać się z tą instrukcją przed przystąpieniem do użytkowania urządzenia.

ΕΓ ΕΙΡΙ∆Ι ΡΗΣΤΗ Παρακαλ ύµε δια άστε τ πρινρησιµ π ιήσετε τη συσκευή.

ALPINE ELECTRONICS MARKETING, INC.

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

ALPINE ITALIA S.p.A.

1-1-8 Nishi Gotanda,

161-165 Princes Highway, Hallam

Viale C. Colombo 8, 20090 Trezzano

Shinagawa-ku,

Victoria 3803, Australia

Sul Naviglio (MI), Italy

Tokyo 141-0031, Japan

Phone 03-8787-1200

Phone 02-484781

Phone 03-5496-8231

ALPINE ELECTRONICS GmbH

ALPINE ELECTRONICS DE ESPAÑA, S.A.

 

ALPINE ELECTRONICS OF AMERICA, INC.

Frankfurter Ring 117,

Portal de Gamarra 36, Pabellón, 32

19145 Gramercy Place, Torrance,

80807 München, Germany

01013 Vitoria (Alava)-APDO 133, Spain

California 90501, U.S.A.

Phone 089-32 42 640

Phone 945-283588

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF U.K. LTD.

ALPINE ELECTRONICS (BENELUX) GmbH

 

ALPINE ELECTRONICS OF CANADA, INC.

Alpine House

Leuvensesteenweg 510-B6,

777 Supertest Road, Toronto,

Fletchamstead Highway, Coventry CV4 9TW, U.K.

1930 Zaventem, Belgium

Ontario M3J 2M9, Canada

Phone 0870-33 33 763

Phone 02-725-13 15

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS FRANCE S.A.R.L.

 

 

 

 

(RCS PONTOISE B 338 101 280)

 

 

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

 

 

B.P. 50016, 95945 Roissy Charles de Gaulle

 

 

Cedex, France

 

 

Phone 01-48638989

 

 

 

Designed by ALPINE Japan

 

 

68-09359Z28-B

DE

FR

ES

IT

SE

NL

RU

PL

GR

ENGLISH

Contents

Operating Instructions

WARNING

 

WARNING .................................................

3

CAUTION ..................................................

3

PRECAUTIONS ........................................

3

Getting Started

 

Accessory List ..................................................

6

Turning Power On and Off ...............................

6

Detaching and Attaching the Front Panel ........

6

Initial System Start-Up .....................................

6

Adjusting Volume .............................................

6

Radio

 

Listening to Radio ............................................

7

Presetting Stations Manually ............................

7

Presetting Stations Automatically ....................

7

Tuning to Preset Stations ..................................

7

RDS

 

Setting RDS Reception Mode and Receiving

 

RDS Stations .................................................

8

Recalling Preset RDS Stations .........................

8

Receiving RDS Regional (Local) Stations .......

8

PI SEEK Setting ...............................................

9

Receiving Traffic Information ..........................

9

Receiving Traffic Information While Playing

 

CD or Radio ..................................................

9

Displaying Radio Text ......................................

9

Sound Setting

 

Adjusting Bass/Treble/Balance (Between Left

 

and Right)/Fader (Between Front and Rear)/

Loudness/Defeat ..........................................

13

Setting the Bass Control .................................

14

Setting the Treble Control ...............................

14

Adjusting the High Pass Filter ........................

15

Other Functions

 

Displaying the Text .........................................

15

Using the AUX Input Terminal

 

(CDE-9874 Series only) ..............................

16

SETUP

 

Bluetooth Setting

 

Setting the Bluetooth Connection (BT IN) ......

17

Sound Customizing

 

Adjusting Source Signal Levels .......................

17

Subwoofer On and Off .....................................

17

Setting the Subwoofer System .........................

17

Visual Customizing

 

Dimmer Control (CDE-9874RB only) .............

17

Scroll Type Setting ...........................................

18

Scroll Setting (TEXT SCR) ..............................

18

Demonstration ..................................................

18

MP3

 

Playing MP3 Data (PLAY MODE) ..................

18

External Device

 

Turning Mute Mode On/Off (INT MUTE) ......

18

Connecting to an External Amplifier

 

(POWER IC) .................................................

18

Setting the AUX+ SETUP Mode .....................

18

Setting the AUX NAME mode

 

(CDE-9874 Series only) ...............................

18

CD/MP3

 

Playback .........................................................

10

Repeat Play .....................................................

10

M.I.X. (Random Play) ....................................

11

Searching for CD Text ....................................

11

File/Folder Name Search

 

(concerning MP3) .......................................

11

Quick Search (CDE-9874 Series only) ..........

12

About MP3 .....................................................

12

1-EN

iPod® (Optional)

 

Playback ..........................................................

19

Searching for a desired Song ..........................

19

Quick Search (CDE-9874 Series only) ...........

20

Direct Search Function ...................................

20

Select Playlist/Artist/Album/Genre/

 

Composer ....................................................

20

Random Play Shuffle (M.I.X.) .......................

21

Repeat Play .....................................................

21

Displaying the Text .........................................

21

Information

 

In Case of Difficulty .......................................

22

Specifications ..................................................

24

Installation and Connections

Warning ..................................................

25

Caution ...................................................

25

Precautions ............................................

25

Installation ......................................................

26

Connections ....................................................

28

2-EN

Operating Instructions

WARNING

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.

Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

PRECAUTIONS

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.

Moisture Condensation

You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Damaged Disc

Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

USE THE CORRECT AMPERE RATING WHEN REPLACING

FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN

INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

3-EN

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power is off.

Inserting Discs

Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen.

Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.

New Discs

To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Centre Hole

Centre Hole

 

New Disc

Bumps

Outside

 

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any special shape discs.

Use of special shape discs may cause damage to the mechanism.

4-EN

Installation Location

Make sure this unit will not be installed in a location subjected to:

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

CORRECT

INCORRECT

CORRECT

Disc Cleaning

Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

Disc Accessories

There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.

Transparent Sheet

Disc Stabilizer

On handling Compact Discs (CD/CD-R/CD-RW)

Do not touch the surface.

Do not expose the disc to direct sunlight.

Do not affix stickers or labels.

Clean the disc when it is dusty.

Make sure that there are no bumps around the disc.

Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalised).

Finalize the CD-R/CD-RW if necessary, and attempt playback again.

About media that can be played

Use only compact discs with the label side showing the CD logo marks below.

If you use unspecified compact discs, correct performance cannot be guaranteed.

You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3 formatted audio files.

Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs

recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard.

Use discs with MP3 files written in a format compatible with this unit. For details, see pages 12-13.

ROM data other than audio files contained in a disc will not produce sound when played back.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

“MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.”

“Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com”

5-EN

Alpine CDE-9874RB, CDE-9874R, CDE-9872RE, CDE-9874RR, CDE-9872R User Manual

Getting Started

CDE-9874 Series

Rotary encoder

SOURCE/

(Release)

CDE-9872 Series

SOURCE/

 

(Release)

 

Accessory List

 

Head unit ............................................................................

1

Power cable ........................................................................

1

Mounting sleeve.................................................................

1

Carrying case.....................................................................

1

Rubber Cap ........................................................................

1

Hex Bolt ..............................................................................

1

Screw (M5 × 8)....................................................................

4

Owner’s Manual ..........................................................

1 set

Turning Power On and Off

Press SOURCE/ to turn on the unit.

The unit can be turned on by pressing any other button except and

(Release).

Press and hold SOURCE/ for at least 2 seconds to turn off the unit.

The first time power is turned on, the volume will start from level 12.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

When detaching the front panel, do not apply excessive force as it may result in malfunction.

Attaching

1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.

1 Turn off the unit power.

2 Remove the detachable front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

1

RESET switch

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press (Release) at the lower left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

6-EN

Adjusting Volume

Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) until the desired sound is obtained.

Connectable to Steering Remote Control Interface Box

You can operate this unit from the vehicle’s control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

Radio

CDE-9874 Series

SOURCE/

TUNE/A.ME BAND/TA

Preset buttons

(1 through 6)

FUNC./SETUP

CDE-9872 Series

SOURCE/

TUNE/A.ME BAND/TA

Preset buttons

(1 through 6)

FUNC./SETUP

Listening to Radio

1 Press SOURCE/ to select TUNER mode.

2 Press BAND/TA repeatedly until the desired radio band is displayed.

F1 (FM1) F2 (FM2) F3 (FM3)* MW LW F1 (FM1)

*When CDE-9872RE is connected, the received frequency band is F3 (LOW BAND).

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK

The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Press or to tune in the desired station.

Holding down or will change the frequency continuously.

Presetting Stations Manually

1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.

2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.

The selected station is stored.

The display shows the band, preset number and station frequency memorized.

A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW).

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

If the indicator is illuminated, turn off the indicator by pressing FUNC./SETUP, and then you can perform the operation.

Presetting Stations Automatically

1 Press BAND/TA repeatedly until the desired radio band is displayed.

2 Press and hold TUNE/A.ME for at least 2 seconds.

The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1 Press BAND/TA repeatedly until the desired band is displayed.

2 Press any one of the station preset buttons

(1 through 6) that has your desired radio station in memory.

The display shows the band, preset number and frequency of the station selected.

If the indicator is illuminated, turn off the indicator by pressing FUNC./SETUP, and then you can perform the operation.

7-EN

RDS

CDE-9874 Series

Rotary encoder

/ /ENT

BAND/TA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/SOUND

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

/AF

VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FUNC./SETUP

 

 

 

CDE-9872 Series

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/ /ENT

 

 

 

 

BAND/TA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

/AF

VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/AUDIO FUNC./SETUP

Setting RDS Reception Mode and

Receiving RDS Stations

The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme.

1 Press FUNC./SETUP so that the indicator lights up.

2 Press 1/AF to activate the RDS mode.

3 Press or to tune in the desired RDS station.

4 Press 1/AF again to deactivate the RDS mode.

5 Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out.

The RDS digital data includes the following:

PI

Programme Identification

PS

Programme Service Name

AF

List of Alternative Frequencies

TP

Traffic Programme

TA

Traffic Announcement

EON

Enhanced Other Networks

8-EN

Recalling Preset RDS Stations

1 Press FUNC./SETUP so that the indicator lights up.

2 Press 1/AF to activate the RDS mode.

3 Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

4 Make sure that theindicator light goes out, then press the preset button in which your desired RDS station is preset.

If the preset station’s signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.

5 If the preset station and the stations in the AF list cannot be received:

When the PI SEEK setting is on (refer to “PI SEEK Setting” on page 9), the unit searches again for a station in the PI (Programme Identification) list.

If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset number disappears.

If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.

For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1, F2 and F3 bands only.

Operate the unit while theindicator lights up. If no operation is performed for 10 seconds, the indicator goes out.

Receiving RDS Regional (Local)

Stations

1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode.

2 Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the REGIONAL mode, and then press //ENT.

3 Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the related local RDS station.

4 Press and hold FUNC./SETUP for at least

2 seconds to return to normal mode.

Press /SOUND (CDE-9874 Series only) or /AUDIO (CDE-9872 Series only) to return to the previous mode.

If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Loading...
+ 21 hidden pages