Alpine CDA-105 User Manual 2

0 (0)
MP3/WMA/AAC CD Receiver
R
CDA-105
• OWNER’S MANUAL Please read before using this equipment.
• MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil.
EN
FR
ES
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
• MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
Designed by ALPINE Japan
68-09359Z78-A
ENGLISH
Contents Operating Instructions
WARNING
WARNING ................................................. 3
CAUTION .................................................. 3
PRECAUTIONS ........................................ 3
Getting Started
Accessory List .................................................. 6
Turning Power On and Off ............................... 6
Detaching and Attaching the Front Panel ........ 6
Initial System Start-Up ..................................... 6
Adjusting Volume ............................................. 7
Lowering Volume Quickly ............................... 7
Setting the Time ............................................... 7
Radio
Listening to Radio ............................................ 7
Presetting Stations Manually ............................ 8
Presetting Stations Automatically .................... 8
Tuning to Preset Stations .................................. 8
Frequency Search Function .............................. 8
Receiving a Multicast Station (HD Radio™
Reception) (HD Radio mode only) ............... 8
Setting the Bass Control .................................13
Setting the Bass Center Frequency .............. 13
Setting the Bass Bandwidth .........................13
Setting the Bass Level .................................13
Setting the Treble Control ...............................13
Setting the Treble Center Frequency ........... 13
Setting the Treble Level .............................. 13
Adjusting the High Pass Filter ........................ 14
Turning Loudness On/Off ...............................14
Turning Subwoofer ON/OFF .......................... 14
Setting the Subwoofer System ........................14
Other Functions
Displaying the Text .........................................15
Displaying Time .............................................16
SETUP
BLUETOOTH IN
Setting the Bluetooth Connection ....................17
Visual Customizing
Changing Lighting Color .................................17
Adjusting Display Contrast ..............................17
Dimmer Control ...............................................17
Scroll Type Setting ...........................................17
Scroll Setting (TEXT SCROLL) ......................17
Setting the Language Font ................................17
Demonstration ..................................................17
MP3/WMA/AAC
Playing MP3/WMA/AAC Data
(PLAY MODE) .............................................17
CD/MP3/WMA/AAC
Playback ........................................................... 9
Repeat Play ....................................................... 9
M.I.X. (Random Play) .................................... 10
Searching for CD Text .................................... 10
File/Folder Name Search
(Concerning MP3/WMA/AAC) .................. 10
Quick Search .................................................. 11
About MP3/WMA/AAC ................................ 11
Sound Setting
Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat ............... 12
Setting the Subwoofer Level .......................... 13
External Device
Connecting to an External Amplifier ...............17
Turning Mute Mode On/Off (INT MUTE) ......18
Setting the AUX+ SETUP Mode .....................18
Setting the AUX+ Level (AUX IN GAIN) .......18
Setting the External Digital Input .....................18
Setting the AUX Mode (V-Link) ......................18
Changer Name Setting .....................................18
HD Radio Reception (only when HD Radio Tuner module is connected)
HD Radio Station Call Setting
(STATION CALL) ........................................18
Digital Seek ON/OFF Setting ..........................18
SAT Radio Receiver (Optional)
Receiving Channels with the SAT Radio
Receiver (Optional) .....................................19
Checking the SAT Radio ID Number .............19
1-EN
Storing Channel Presets .................................. 19
Receiving Stored Channels .............................20
Storing the desired Sports Team
(SIRIUS only) ............................................. 20 Storing while receiving a game broadcast ... 20
Game Alert Setup ........................................20
Storing the desired Song/Artist
(SIRIUS only) ............................................. 20
Recalling the stored information
(SIRIUS only) ............................................. 21 If more than 2 Alerts are found
(Blinking ALERT indicator) ....................21
Canceling the stored Alert Memory
(SIRIUS only) ............................................. 21
Search Function ..............................................21
Category Search mode ................................21
Channel/Artist/Song Search mode .............. 21
Quick Search Function ...................................21
Receiving Weather or Traffic Information from
SAT Radio ................................................... 21
Instant Replay Function (SIRIUS only) ......... 22
Changing the Display .....................................22
Setting the Auxiliary Data Field Display
(XM only) .................................................... 22
USB memory (Optional)
Controlling USB memory (Optional) ............. 23
Playing MP3/WMA/AAC Files with the USB
memory (Optional) ......................................23
iPhone/iPod (Optional)
Playback ..........................................................24
Searching for a desired Song ..........................24
Quick Search ................................................... 25
Direct Search Function ................................... 25
Select Playlist/Artist/Album/Genre/
Composer ....................................................25
Alphabet Skip Function ..................................25
Random Play Shuffle (M.I.X.) ....................... 26
Repeat Play .....................................................26
Displaying the Text .........................................26
IMPRINT Operation (Optional)
Changing MultEQ mode .................................27
Adjusting Subwoofer Level/Bass Level/Treble
Level/Fader (Between Front and Rear)/ Balance (Between Left and Right) in MultEQ
mode ............................................................27
Adjusting Sound Setting in Manual Mode ......28
Turning Subwoofer ON/OFF .......................28
Setting the Subwoofer System .....................28
Setting the Subwoofer Phase .......................28 Setting the Subwoofer Channel
(SUBW CHANNEL) ................................28
Equalizer Presets (FACTORY’S EQ) ..........28 Setting the Response Slope for the High
Range Speaker (TW SETUP) ...................28
Setting the Filter type ...................................29
Turning Media Xpander ON/OFF ...............29
Setting the MX Level ...................................29
Setting EQ mode ..........................................29 Setting the Time Correction Unit
(T.CORR PARA) ......................................29 Sound Field Adjustment
(SOUND ADJUST) ..................................29
Adjusting the Parametric Equalizer Curve .......29
Adjusting the Graphic Equalizer Curve ...........30
Adjusting the Time Correction .........................30
Adjusting the Crossover Settings .....................30
Storing the Sound Field Adjustment
Settings .........................................................31
Recalling the Stored Sound Field Adjustment
Settings .........................................................31
About Time Correction ...................................32
About the Crossover ........................................33
About IMPRINT .............................................34
Changer (Optional)
Controlling CD Changer (Optional) ...............35
Playing MP3 Files with the CD Changer
(Optional) .....................................................35
Multi-Changer Selection (Optional) ...............35
Information
In Case of Difficulty ........................................36
Specifications ..................................................39
Installation and Connections
Warning ...................................................40
Caution ...................................................40
Precautions ............................................40
Installation .......................................................41
Connections .....................................................43
LIMITED WARRANTY
2-EN

Operating Instructions

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN

WARNING

INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.

WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

PRECAUTIONS

Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.
3-EN
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
New Discs
To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the center hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.
Center Hole
Center Hole
New Disc
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
Disc Accessories
There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.
Bumps
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure this unit will not be installed in a location subjected to:
• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations
4-EN
Outside (Bumps)
Transparent Sheet Disc Stabilizer
On handling Compact Discs (CD/CD-R/CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback again.
About media that can be played
Use only compact discs with the label side showing the CD logo marks below.
If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CD-ReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio files.
• Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA/AAC files written in a format compatible with this unit. For details, see
• ROM data other than audio files contained in a disc will not produce sound when played back.
pages 11-12.
Protecting the USB connector
• Only a USB memory iPhone/iPod can be connected to the USB connector on this unit. Correct performance using other USB products cannot be guaranteed.
• If the USB connector is used, be sure to connect it to the unit by using a USB extension cable (sold separately). A USB hub is not supported.
• Depending on the connected USB memory device, the unit may not function or some functions may not be performed.
• The audio file format that can be played back on the unit is MP3/WMA/AAC.
• Artist/song name, etc., can be displayed, however characters may not be correctly displayed.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product.
On Handling USB Memory
• To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly. Do not touch the terminals by hand or metal. Do not subject USB memory to excessive shock. Do not bend, drop, disassemble, modify or soak in the water.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high temperatures. Anywhere the possibility of high humidity or corrosive substances are present.
• Fix the USB memory in a location where driver operation will not be hindered.
• USB memory may not function correctly at high or low temperature.
• Use only certified USB memory. Note that even certified USB memory, may not function correctly depending on its type or state.
• USB memory function is not guaranteed. Use USB memory according to the terms of agreement.
• Depending on the settings of the USB memory type, memory state or encoding software, the unit may not play back or display properly.
• A file that is copy-protected (copyright protection) cannot be played back.
• USB memory may take time to start playback. If there is a particular file other than audio in the USB memory, it may take considerable time before the file is played back or searched.
• The unit can play back “mp3”, “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data. This non-audio data will not be recognized. The resulting playback may contain noise that can damage speakers and/or amplifiers.
• It is recommended to back up important data on a personal computer.
• Do not remove the USB device while playback is in progress. Change SOURCE to something other than USB, then remove the USB device to prevent possible damage to its memory.
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
iPod and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license. Other trademarks and trade names are those of their respective owners.
HD Radio™ and the HD and HD Radio Ready logos are proprietary trademarks of iBiquity Digital Corp.
“MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.”
“Supply of this product only conveys a license for private, non­commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue­generation) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com”
Audyssey MultEQ XT is a registered trademark of Audyssey laboratories Inc.
5-EN

Getting Started

3
Grasp the front panel firmly, slide to the left , and then pull to remove.
(OPEN)
SOURCE/
Rotary encoder
MUTE
VIEW
F/SETUP
/ENT
/ESC

Accessory List

Head unit ............................................................................1
Power cable ........................................................................1
Mounting sleeve.................................................................1
Carrying case.....................................................................1
Bracket key.........................................................................2
Screw (M5 × 8)....................................................................4
Owner’s Manual .......................................................... 1 set

Turning Power On and Off

Press SOURCE/ to turn on the unit.
The unit can be turned on by pressing any other button except VIEW.
Press and hold SOURCE/ for at least 2 seconds to turn off the unit.
The first time power is turned on, the volume will start from level 12.
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a malfunction.
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
Do not leave the front panel open, or drive the car with the panel open as it may result in an accident or malfunction.
Attaching
1
Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.
2
Push the left side of the front panel until it locks firmly into the main unit.
Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Detaching and Attaching the Front Panel

Detaching
1
Turn off the unit power.
2
Press (OPEN) to open the front panel.
To close the front panel, press the left side until it locks as shown in the figure below.
6-EN

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press (OPEN) to open the front panel, and then remove it.
3
Press RESET with a ballpoint pen or similar pointed object.
RESET switch

Adjusting Volume

Turn t h e Rotary encoder until the desired sound is obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its previous level.

Setting the Time

1
Press and hold activate the SETUP selection mode
2
Tur n the and then press
3
Turn t h e Rotary encoder to set hour.
4
Press /ENT.
5
Repeat steps 3 and 4 above to set minute.
6
Press and hold return to normal mode.
Pressing /ESC returns to the previous SETUP mode.
If no operation is performed for 60 seconds, SETUP is canceled.
To synchronize the clock to another clock/watch or radio time
announcement, press and hold setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor.
F/SETUP
Rotary encoder
/
ENT
F/SETUP
.
for at least 2 seconds to
.
to select CLOCK ADJUST,
for at least 2 seconds to
/ENT for at least 2 seconds after
Remote control sensor

Radio

/
BAND
Rotary encoder
//
TUNE/A.ME
/ENT
Preset buttons (1 through 6)
/ESC
SOURCE
This unit cannot receive HD Radio signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the Ai-NET bus.
If the unit is connected to a Tagging compatible device, you can use the iTunes Tagging function. For details, refer to the Owner’s Manual of the Tagging compatible device.

Listening to Radio

1
Press SOURCE/ to select TUNER mode.
2
Press BAND repeatedly until the desired radio band is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK (Distance mode)
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
Connectable to Remote Control Interface Box
This unit may be controlled from the vehicle’s audio controls. An optional Alpine Remote Control Interface Box must be used. For details, contact your Alpine dealer.
4
Press or to tune in the desired station.
Holding down or will change the frequency continuously.
If DIGITAL SEEK is set to ON, the SEEK UP/DOWN functions only stop on digital station frequencies while receiving an HD Radio broadcast. Refer to
“Digital Seek ON/OFF Setting” (page 18).
7-EN

Presetting Stations Manually

Frequency Search Function

1
Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.
The selected station is stored. The display shows the band, preset number and station frequency memorized.
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is displayed.
2
Press any one of the station preset buttons (1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency of the station selected.
You can search for a radio station by its frequency.
1
Press and hold /ENT for at least 2 seconds in Radio mode to activate Frequency search mode.
2
Turn t h e Rotary encoder to select the desired frequency.
*
3
Press /ENT to receive the selected frequency.
* Operation is not required during HD Radio reception.
Press /ESC in the search mode to cancel. Or, the search mode will be canceled if no operation is performed for 10 seconds.
Receiving a Multicast Station (HD Radio
™ Reception) (HD Radio mode
only)
Multicasting is the Ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of eight multicast station channels can be selected on this unit.
When multicast station is received, the program number and the SPS indicator lights up. Press the desired program service.
Receiving the Multicast Station Program Service.
BAND No.
Multicast No.
F 1 - 3
9 0.3MHz
Program Service example:
Multicast Radio Station Program No. Program Service
90.3 MHz No.1
90.3 MHz No.2 SPS: Sub-program Service
90.3 MHz No.3 SPS: Sub-program Service | | | |
90.3 MHz No.8 SPS: Sub-program Service
or to select
SPS indicator
MPS
: Main Program Service
8-EN

CD/MP3/WMA/AAC

SOURCE/

Playback

Rotary encoder
(OPEN)
VIEW
/
F/SETUP
/ENT
/ESC
4 5
5
To pause playback, press / .
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel, press to eject the disc.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold for at least 2 seconds.
The “ ” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs cannot be used.
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
“MP3” is displayed during MP3 playback.
“WMA” is displayed during WMA playback.
“AAC” is displayed during AAC playback.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from iTunes Store and files that are copy-protected (copyright protection) cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually and the “ ” indicator lights up. When a disc is already inserted, press SOURCE/ to switch to the DISC mode.
TUNER XM RADIO/SIRIUS*1 DISC USB AUDIO*2/ USB iPod*3 BT AUDIO*4/AUX+*5 CHANGER*6 TUNER
*1Only when XM Radio or SIRIUS Radio is connected. *2Displayed only when no iPhone/iPod is connected. *3Displayed only when the iPhone/iPod is connected. *4Displayed only when BLUETOOTH IN is set to ADAPTE, refer to
“Setting the Bluetooth Connection” (page 17).
*5Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 18).
*6Only when the CD changer is connected.
3
While playing back MP3/WMA/AAC, press or to select the desired folder.
Pressing and holding or will change folders continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as described below.
101 103
Folder number display
Press VIEW to switch the display. See “Displaying the Text”
(page 15) for information about display switching.

Repeat Play

Press 4 to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
*1When a CD changer is connected.
If is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
File number display
9-EN
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
If a CD changer or an MP3 compatible CD changer is connected:
After pressing F/SETUP to select the function mode ( / ), perform the operation within 10 seconds.
: Only files in a folder are repeatedly played
back.
: A disc is repeatedly played back.
*2When an MP3 compatible CD changer is connected.
If a CD changer or an MP3 compatible CD changer is connected:
After pressing F/SETUP to select the function mode ( / ), perform the operation within 10 seconds.

M.I.X. (Random Play)

Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random sequence.
To cancel M.I.X. play, press 5 again.
Internal CD mode :
: The tracks are played back in random
sequence.
CD Changer mode :
: The tracks are played back in random
sequence.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song.
1
Press /ENT during play.
This will set the search mode.
2
Turn t h e Rotary encoder to select the desired track, and then press
This will play the selected track.
Press /ESC in the search mode to cancel. Or, the search mode is
canceled if no operation is performed for 30 seconds.
When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
/ENT.

File/Folder Name Search (Concerning MP3/WMA/AAC)

Folder and file names may be searched and displayed during playback.
1
During MP3/WMA/AAC playback, press /ENT to activate the search mode.
2
Turn t h e Rotary encoder to select Folder Name Search mode or File Name Search mode, and then press
/ENT.
: The tracks on all the CDs in the current
magazine will be included in the random playback sequence.
*3When a CD changer equipped with the ALL M.I.X. function is
connected.
If M.I.X. is set to ON during (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: Files are played back in random sequence.
If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.
*4In the USB mode, all files stored in the USB memory are played back
in random sequence, and the “
When a song is played back during Random (M.I.X.) play in the USB
mode, the song can be played back again randomly even if not all songs on the USB Memory have been played back.
” indicator lights up.
Folder Name Search mode
3
Tur n t h e
4
Press and hold /ENT for at least 2 seconds to play back the first file in the selected folder.
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed for 30 seconds.
To search for files in the Folder Name Search mode, press /ENT.
Files in the folder may be searched.
Press /ESC to exit Folder Name Search mode in step 3 in order
to select File Name Search mode.
• The root folder is displayed as “– – – – – – – – – – – –”.
When Folder Name Search is made during M.I.X. play, the M.I.X.
play mode will be canceled.
File Name Search mode
3
Press or to select another Folder.
4
Select the desired file by turning the Rotary encoder.
5
Press /ENT to play back the selected file.
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed for 30 seconds.
Press /ESC in the search mode to return to the previous mode.
When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
Rotary encoder
to select the desired folder.
10-EN

Quick Search

You can search for tracks (files).
1
Press and hold /ENT for at least 2 seconds in the CD/Changer/MP3/WMA/AAC mode to activate Quick Search mode.
2
Turn t h e Rotary encoder to select a desired track (file).
The selected track is played back immediately.
Press /ESC in the search mode to cancel. Or, the search mode is
canceled if no operation is performed for 10 seconds.

About MP3/WMA/AAC

CAUTION
Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding”, and is a basic format of audio compression used by MPEG2 or MPEG4.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user’s manual for that software. MP3/WMA/AAC files that are playable on this device have the file extensions. MP3: “mp3” WMA: “wma” (ver. 7.1, 8 and 9 are supported) AAC: “m4a”
There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It’s possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes is supported.
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates: 8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates: 48 - 192 kbps
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates: 16 - 320 kbps
This device may not play back correctly depending on sampling rates. In the USB mode, the playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, the display is NO SUPPORT. If information contains characters other than ID3 tag information, the audio file may not be played back. The tag information may not be correctly displayed, depending on the contents.
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then written to a CD-R, CD-RW using CD-R writing software or stored to a USB memory. A disc can hold up to 510 files/folders (including Root Folders), and the maximum number of folders is 255. This unit can recognize at least 100 folders (including root folder) and 100 files per folder stored in USB memory. Playback may not be performed if a disc or USB memory exceeds the limitations described above. Do not make a file’s playback time more than 1 hour.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs. This device also can play back USB memory media.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember.
The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited.
Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly. This device also supports FAT 12/16/32 for USB memory device.
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.
11-EN
Order of files
Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software’s documentation. The playback order of the folders and files is as follows.
Root folder
Folder
* The folder No./ folder Name will not be displayed if no file is
contained in the folder.
MP3/WMA/AAC File
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.
Tag
Song information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC files.

Sound Setting

SOURCE/

Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat

1
If no operation is performed for 5 seconds after selecting the SUBW
LEVEL, BASS LEVEL, TREBLE LEVEL, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14).
2
Depending on the connected devices, some functions and display
indications do not work.
Rotary encoder (AUDIO/LOUD)
BAND
Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBW LEVEL* BASS LEVEL TREBLE LEVEL BALANCE FA DE R DEFEAT VOLUME SUBW LEVEL
Subwoofer level: 0 ~ +15 Bass level: –7 ~ +7 Treble level: –7 ~ +7 Balance: L15 ~ R15 Fader: R15 ~ F15 Defeat: ON/OFF Volume: 0 ~ 35
Tur n t h e Rotary encoder until the desired sound is obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
/ENT
/ESC
SOUND SETUP
Root folder
The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs.
12-EN

Setting the Subwoofer Level

You can change the Subwoofer Level to create your own tonal preference.
1
Press SOUND SETUP to activate the Sound Setting mode.
2
Turn t h e Rotary encoder to select the SUBW
LEVEL Adjustment mode, and then press
SUBW LEVEL*1 BASS*2 TREBLE*2 HPF*2
SUBW LEVEL
3
Turn t h e Rotary encoder to select the desired subwoofer level (0~+15).
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
*1When the subwoofer mode is set to OFF, its level cannot be adjusted,
*2The function is inoperable when DEFEAT is set to ON.
“Turning Subwoofer ON/OFF” (page 14).
refer to The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 12).
“Adjusting Subwoofer Level/Bass Level/Treble
/ENT.

Setting the Bass Level

3
-3*5Turn th e Rotary encoder to select the desired bass level (–7~+7).
You can emphasize or weaken the bass level.
4
Press and hold /ESC for at least 2 seconds to return to normal mode.
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).
Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected.
When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
*3When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14). *4The function is inoperable when DEFEAT is set to ON. *5The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat” (page 12).
“Adjusting Subwoofer Level/Bass Level/Treble

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal preference.
1
Press SOUND SETUP to activate the Sound Setting mode.
2
Turn t h e Rotary encoder to select the BASS Adjustment mode, and then press
SUBW LEVEL*3 BASS*4 TREBLE*4 HPF*4
SUBW LEVEL

Setting the Bass Center Frequency

3
-1 Press BAND to select the desired bass center
frequency.
80 Hz 100 Hz 200 Hz 60 Hz 80 Hz
Emphasizes the displayed bass frequency ranges.

Setting the Bass Bandwidth

3
-2 Press SOURCE/ to select the desired bass
bandwidth.
12 34
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.
/ENT.

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal preference.
1
Press SOUND SETUP to activate the Sound Setting mode.
2
Turn t h e Rotary encoder to select the TREBLE Adjustment mode, and then press
SUBW LEVEL*6 BASS*7 TREBLE*7 HPF*7
SUBW LEVEL

Setting the Treble Center Frequency

3
-1 Press BAND to select the desired treble center
frequency.
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasizes the displayed treble frequency ranges.

Setting the Treble Level

3
-2*8Turn th e Rotary encoder to select the desired treble level (–7~+7).
You can emphasize or weaken the treble level.
4
Press and hold /ESC for at least 2 seconds to return to normal mode.
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).
/ENT.
13-EN
Loading...
+ 32 hidden pages