Page 1
What is it?
With the Alphacool Eisstation, you get a compact reservoir that ts into nearly any case. It
comes in three different versions for three different pumps, which are mounted into the
bottom of the reservoir. A DDC, a D5, and a DC-LT version are available.
Highlights
1. The cap is made of sturdy Nylon
2. Three versions for all current pumps
3. Numerous mounting options
4. Illuminated logo and LED mounting options
Mounting example
Alphacool Eisstation
Version: 09/2017
We assume no responsibility for any typos.
- 1 -
Page 2
Versions
Eissation DDC
Eissation VPP
Downloads
Product Images
Alphacool Eisstation DDC
Alphacool Eisstation VPP
Eissation DC-LT
https://www.alphacool.com/download/1012870.zip
https://www.alphacool.com/download/1012871.zip
Alphacool Eisstation DC-LT
Version: 09/2017
We assume no responsibility for any typos.
https://www.alphacool.com/download/1012872.zip
- 2 -
Page 3
Technical Specication
Technical Data Eisstation DDC Eisstation VPP Eisstation DC-LT
Dimension (LxWxH) 102 x 82 x 89 mm 102 x 82 x 105 mm 102 x 82 x 85 mm
Material
Threads
Nylon, PMMA
3x G 1/4“
1x G 3/8“
Mounting possibilities
- screw from below via mountig plate (decoupled)
- screw laterally, within 5,25“ bays (decoupled)
- x with velcro mat
Colors
black (Soft Touch - surface)
reservoir: smoked glass (Nylon)
Logo LED Connection 3-Pin
LED holes 4x 5mm
Other information
Product Article No.
Alphacool
Article No.
Aquatuning
solo reservoir
Alphacool Eisstation DDC 15272 1012870 4250197152723
EAN Code Dimension PU
in mm
Weight
in kg
Alphacool Eisstation DC-LT 15274 1012872 4250197152747
reservoir with pump included
Alphacool Eisstation DDC
incl. Alphacool Laing DDC-1T
Alphacool Eisstation VPP
incl. Alphacool Eispumpe VPP755
Alphacool Eisstation DC-LT
incl. Alphacool DC-LT 2600 Ultra silent
13296 1012972 4250197132961
13295 1012971 4250197132954
13297 1012973 4250197132978
Mounting Material/Scope of Delivery
Scope of Delivery Eisstation DDC Eisstation VPP Eisstation DC-LT
Mounting screws
4x M4x5
4x M3x4
4x M4 decoupling screws
130 x 97 x 118 0,4Alphacool Eisstation VPP 15273 1012871 4250197152730
130 x 97 x 118 1,5
Pump screws
Other mounting material
Sealing screws
Version: 09/2017
We assume no responsibility for any typos.
4x M4x25 8x M4x8 2x M3x8
1x mounting plate
1x self-adhesive velcro mat
1x G 1/4“, with LED drilling
1x G 3/8“, with LED drilling
- 3 -
Page 4
Article texts
Up to 50 words
The Alphacool Eisstation is a compact reservoir available in three versions, for D5, DDC, and DC-LT pumps. The
mounting options are numerous, and the Eisstation can even be mounted vertically or horizontally. Alphacool has
built the reservoir out of highly break-proof Nylon, not Plexiglas.
Up to 125 words
The Alphacool Eisstation is a compact reservoir available in three versions, for D5, DDC, and DC-LT pumps. It can
be mounted on a 2.5” bracket or in a 5.25” bay, and is always decoupled thanks to special screws. Alternatively, it
can be mounted with a self-adhesive Velcro fastener, which can hold the Eisstation in place even during transport
thanks to its size. Besides the horizontal installation, vertical mounting is also possible. The front of the reservoir
has one IN and one OUT. The cap also has two additional inlets, one of which is a G3/8” that simplies lling the
reservoir due to its larger size. The upper clear portion is not made of easily breakable Plexiglas, but rather of
highly durable Nylon. That feature is unique on the water cooling market.
Up to 250 words
The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different
pumps. D5, DDC and DC-LT versions are available. The pumps are not visible in the bottom of the Eisstation
when they are installed.
The installation options are numerous. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be
mounted in a 5.25” bay. In either case, the special decoupling screws included with the Eisstation are used for
mounting it, which also serve to reduce the noise generated. Another installation option is the included self-adhesive Velcro fastener. The size of the Velcro ensures secure positioning even during transport. The Eisstation can be
mounted vertically or horizontally.
There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the
illuminated logo. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with
its larger size, simplies lling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional
5mm LED places can be found in the bottom of the reservoir and illuminate the water-lled portion from below.
A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch
surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of
simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or
Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly
impossible to damage the Eisstation’s container.
Version: 09/2017
We assume no responsibility for any typos.
- 4 -
Page 5
Up to 500 words
The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different
pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is
not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases
the stability of the Eisstation.
The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket.
It can also be mounted in a 5.25” bay. In either case, the special decoupling screws included with the Eisstation are
used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume signi-
cantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom
of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom
against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport.
The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.
There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the
illuminated logo. The logo’s colour can be changed with the optional modding kit. In the cap, there is one G1/4”
and one G3/8” connection available. The G3/8” connection, with its larger size, simplies lling the Eisstation and
can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of
the reservoir and illuminate the water-lled portion from below.
A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch
surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of
simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or
Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s container.
Version: 09/2017
We assume no responsibility for any typos.
- 5 -
Loading...